Washer Pump Parts for FRONT ONLY
Fitment：
For Subaru Impreza MK2 2000-2007
For Subaru Legacy MK3 1998–2004
For Subaru Forester SG5 2002-2008
For Subaru Forester 1997-2002
For Subaru Liberty 1996-2003
For Subaru Outback BE BH 2000 - 2003
For Honda Civic 5dr Hatchback 1995 -2000
For Honda S2000 1999-2009
For Honda HRV MK1 1999-2006
For Honda FRV 2004 -2009
For Mitsubishi Shogun / Pajero V60 2000-2006
PLEASE double check shape of electrical connect
Pump comes with grommet
Grommet on its own
Screenwash may vary but is good quality concentrate.
The Washer Pump is located in the bottom of the Washer Bottle this will often be very low down on the car.
Access to the Washer pump may be gained by partly removing the inner wheel arch of bumper trim. The Pump is push fitted into the washer bottle. The washer pipes should be push fitted on, some may have a clip to release them, if push fitted on and they are hard to remove heat them up with a hair dryer and they will come off very easily.
Never let Washer pump run dry as this causes failure, also put more Windscreen washer fluid than is recommended as it is less likely to freeze. Do not put anti-freeze into washer bottle. Always put Windscreen fluid in first then top up with Water.
Washer Pump Parts for FRONT ONLY
Fitment：
For Subaru Impreza MK2 2000-2007
For Subaru Legacy MK3 1998–2004
For Subaru Forester SG5 2002-2008
For Subaru Forester 1997-2002
For Subaru Liberty 1996-2003
For Subaru Outback BE BH 2000 - 2003
For Honda Civic 5dr Hatchback 1995 -2000
For Honda S2000 1999-2009
For Honda HRV MK1 1999-2006
For Honda FRV 2004 -2009
For Mitsubishi Shogun / Pajero V60 2000-2006
PLEASE double check shape of electrical connect
Pump comes with grommet
Grommet on its own
Screenwash may vary but is good quality concentrate.
The Washer Pump is located in the bottom of the Washer Bottle this will often be very low down on the car.
Access to the Washer pump may be gained by partly removing the inner wheel arch of bumper trim. The Pump is push fitted into the washer bottle. The washer pipes should be push fitted on, some may have a clip to release them, if push fitted on and they are hard to remove heat them up with a hair dryer and they will come off very easily.
Never let Washer pump run dry as this causes failure, also put more Windscreen washer fluid than is recommended as it is less likely to freeze. Do not put anti-freeze into washer bottle. Always put Windscreen fluid in first then top up with Water.