4S 100A w/Balance 3.2V LiFePo4 LiFe 18650 Battery BMS Protection PCB Board 14.4V

Popular

    Product Introduction

    This product is 4 string 12.8V LiFePo4 Lithium iron phosphate battery power protection board. With a balanced, same port 45A discharge. With heat sink.
    Protection board with overcharge protection, over discharge protection, over current protection, short circuit protection, temperature protection.
    Products with 10 MOS tube, powerful cooling aluminum, continuous current limit of 100A. Applicable to inverter, xenon lamp, solar street lights and other 4S battery pack.
    T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, need to remove the solder joint next to the 0R resistance.
    Note: 3A current above the discharge products, the battery discharge rate to 3C or more.
    Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
    In the use of the battery will heat is Battery magnification is not applicable, this situation can not be long-term use, the battery will soon be damaged.
     
    Specifications:
    Discharge:
    Continuous Discharging Current: 100A
    Instantaneous Discharge Current: 120A
    Charge:
    Charging Voltage: 14.8V (Switching power 15-16V)
    Charging Current: 10A (MAX)
    Overcharge Protect:
    Over-charge Detect: 3.75±0.05V
    Protect Delay: 1300MS
    Over-charge Release: 3.60±0.05V
    Balance:
    Detect Voltage: 3.60±0.05V
    Release Voltage: 3.59±0.05V
    Balance Current: 65mA
    Over-discharge Protect:
    Over-discharge Detect: 2.1±0.08V
    Over-discharge Detect delay: 145S
    Release Voltage: 2.3±0.1V
    Over-current Protect:
    Detect Voltage: 200mV
    Detect Delay: 20mS
    Current Detect: 120±10A
    Release Condition: Cut Load
    Short-circuit Protect:
    Protect Condition: Cut Load (Not short connect)
    Detect Delay: 300uS
    Release Condition: Cut Load
    Inner Resistance: ≤20mΩ
    Self-Consumption:
    Working Current: ≤30uA
    Sleep Current (when Over-discharge): ≤20uA
    Working Temperature Range: -30+80°
    PCB Board Size: 7x6cm/2.76x2.36"
    Quantity: 1 Pc
     
    Note:
    Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
    Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
     
    No Retail Package
     
    Package Includes:
    1 x BMS Protection Board for 12V 14.8V 4S 100A LiFePO4 Battery with Cable
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    4S 100A w/Balance 3.2V LiFePo4 LiFe 18650 Battery BMS Protection PCB Board 14.4V

    Product Introduction

    This product is 4 string 12.8V LiFePo4 Lithium iron phosphate battery power protection board. With a balanced, same port 45A discharge. With heat sink.
    Protection board with overcharge protection, over discharge protection, over current protection, short circuit protection, temperature protection.
    Products with 10 MOS tube, powerful cooling aluminum, continuous current limit of 100A. Applicable to inverter, xenon lamp, solar street lights and other 4S battery pack.
    T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, need to remove the solder joint next to the 0R resistance.
    Note: 3A current above the discharge products, the battery discharge rate to 3C or more.
    Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
    In the use of the battery will heat is Battery magnification is not applicable, this situation can not be long-term use, the battery will soon be damaged.
     
    Specifications:
    Discharge:
    Continuous Discharging Current: 100A
    Instantaneous Discharge Current: 120A
    Charge:
    Charging Voltage: 14.8V (Switching power 15-16V)
    Charging Current: 10A (MAX)
    Overcharge Protect:
    Over-charge Detect: 3.75±0.05V
    Protect Delay: 1300MS
    Over-charge Release: 3.60±0.05V
    Balance:
    Detect Voltage: 3.60±0.05V
    Release Voltage: 3.59±0.05V
    Balance Current: 65mA
    Over-discharge Protect:
    Over-discharge Detect: 2.1±0.08V
    Over-discharge Detect delay: 145S
    Release Voltage: 2.3±0.1V
    Over-current Protect:
    Detect Voltage: 200mV
    Detect Delay: 20mS
    Current Detect: 120±10A
    Release Condition: Cut Load
    Short-circuit Protect:
    Protect Condition: Cut Load (Not short connect)
    Detect Delay: 300uS
    Release Condition: Cut Load
    Inner Resistance: ≤20mΩ
    Self-Consumption:
    Working Current: ≤30uA
    Sleep Current (when Over-discharge): ≤20uA
    Working Temperature Range: -30+80°
    PCB Board Size: 7x6cm/2.76x2.36"
    Quantity: 1 Pc
     
    Note:
    Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
    Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
     
    No Retail Package
     
    Package Includes:
    1 x BMS Protection Board for 12V 14.8V 4S 100A LiFePO4 Battery with Cable
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques