JKLink - Smart Battery Monitor Interface

Overview

The JKLink interface unit is a smart battery monitor interface adaptor for JKBMS active balancer from JK-BD6Axxxxxx and JK-BxAxxxxxx families.

The JKLink smart battery monitor interface is a professional product that allows you to integrate your battery with existing invertors over CAN and RS485 and check the status of your battery from cloud. Once connected, it will configured automatically the battery parameters in the invertor and sending the important parameters to the cloud through MQTT protocol.

The product was developed by a specialized company and it is available with bill and warranty. Installation is relatively simple but it would be preferable to be familiar with BMS and inverter installation. 

 

The KIT is available with two years warranty. Each device is being tested before shipment. After you receive the KIT, we'll assist you through mail or chat to install and configure the interface. We'll guaranty you a professional customer support, answering in the same day and doing all our best to get the interface running well in your car.

Features and Capabilities

• The JKlinkBMS smart monitor is compatible with most of invertors having a RS485 or CAN interface for battery management (e.g Victron/SMA/Goodwe/Voltronic/Axpert/MPP Solar/Easun/INVT/Growatt/Deye/Sun-Synk/Sol-Art, etc..)
• Data display of battery parameters
• Battey voltage (V), Battery current (A), Battery state of charge (SOC), Total power (Wh)
• External and battery temperature (Celsius degrees)
• Fan speed (rpm)
• Fan speed control based on external/BMS temperature sensors and charge/discharge current 
• Galvanically isolated JKBMS communication
• RS485 and CAN port for inverter battery management
• Programable relay, high or low battery voltage
• WiFi connection to Internet for cloud monitoring and control
• Web interface for battery status and parameters
• Invertor & BMS status, charge/discharge status, voltage, current, power, SOC, capacity, average cell voltage, delta cell voltage, external/MOS/internal temperatures, fan speed, relay status.
• MQTT Broker for Home Assistant and could services 
• OTA firmware update 

Please do not hesitate to contact us for any questions and clarifications.