Features:
-
This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
-
High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
-
Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
-
Programming port is the port for program upload, download, test and monitor.
-
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
Specifications:
Model: FX1N-20mr
Working Voltage: DC24（V）
Wide Power Supply Voltage: 10-28VDC
Baud Rate: 9600
Programming Software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120G
Package Included:
1 x PLC Board
Chinese programming software download address:Pan.baidu.com/s/1nty5XXn
PLC data download address: Pan.baidu.com/s/1eRNhn3O
Module function:
This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:
-
Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
-
When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
-
The power supply is switched on, the relay 1, 2 have no action, when a or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
-
Through the 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
-
When the 1 has a , the relay 1 is closed, the relay 2 is disconnected; when the 2 has a , the relay 1 is turned off, and the relay 2 is closed.
-
Can be connected to the NPN sensor , the sensor programming, to achieve arbitrary control of the relay.
-
When the 1 is triggered, the relay 1 is controlled, and when the 2 is triggered, the relay 2 is controlled.
-
Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
-
When the 1 has a , the motor is controlled to rotate; when the 2 has a , the motor is reversed.
These are just some examples, modules can achieve far more than these functions
-
Input high speed pulse C235, C251 and FX1N compatible.
-
Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.
Precautions for use:
-
The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
-
Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
-
Built-in Analog output DA, corresponding to internal data register D5101.
-
When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.
|
Assistant
Relay
|
Normal Use
|
M0 - M383
|
|
|
Hold
After Power Off
|
M384-M1535
|
|
|
Special
Use
|
M8000-M8255
|
|
State
|
Holding
Use
|
S0-S999
|
|
Timer
|
100MS
|
T0-T199
|
|
|
10MS
|
T200-T245
|
|
|
1MS
|
T246-T249
|
|
|
100MS
accumulation
|
T250-T255
|
|
Counter
|
16-bit
|
C0-C15(0-32767)
|
|
|
16-bit(Hold
After Power Off)
|
C16-C199
|
|
|
High
Speed(Hold After Power Off)
|
C200-C255
|
|
Data Register
|
16-bit
|
D0-D127
|
|
|
16-bit(Hold
After Power Off)
|
D128-D5029
|
|
|
16-bit
Special Use(AD)
|
D5030(Output
Voltage: 0-10V)
|
|
|
16-bit
Special Use(DA)
|
D5101(Output
Voltage: 0-3.3V)
|
1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution. 1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails. 2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area 3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
|
