New Wire Terminal Pulling-out Force Gauge Tester Digital 500N Force Meter

Test stand + 500 Newton Digital force gauge + Fixture

Test Stand Wire terminal Pulling-out Force Meter ADL is an instrument with a test stand, a 500 Newton digital force gauge and a fixture. With this device, you can guarantee for the quality of your product with more confidence, since it can test the pulling out force of variety of wire terminals. When testing the harness, the instrument can combine the digital force gauge(HF-500) and analogue force gauge (NK-500).

The standard configuration of terminal pull force tester is with digital force gauge (HF-500).

You can also config with analog force gauge(NK-500) and need more $38, if you need please contact us.

• Horizontal installation
•  Manual operation, simple and stable.
• This machine can be installed on the table (platform) to make the frame more stable to use.
• Effective stroke: 50mm
• Rated load: 500N (Can also be configured 1000N)

1.  Digital force gauge HF-500 (standard)

• Max. Load:500N(Kg, N and Ib three units can be converted automatically)
• Resolution: 0.01N
• Precision: ±0.5%
• Output interface: RS 232 Nine holes socket
• Charging power: 110-220V/AC, Batteries continuous working time: 6-8 hours
• Stability: temperature drift: 0.2uV/°(0~60°C); null drift: ≤ 0.1%/8hours/FS
• Calibration range: Full range calibration
• Environmental temperature: 0~+60°C
• Environmental humidity:≤ 80%
• Allow overload: 150%
• Supply power mode: No. 5 Ni-MH battery, 220V AC, charging for 4-6 hours

2.   Analog force gauge NK-500 (optional)

• Max. Load:500N(50kg)
• Push pull rod trip: 10mm
• Working temperature: 20°C±10°C
• Transportation temperature:-27°C~+70°C
• Relative humidity: 15%~80%RH
•