Store category
You may also like
Product Description
Tips: We can provide wholesale if you need large quantity, please contact us. Thanks.
Function 1:
Features:
This multifunction relay control module, designed specifically for a variety of users with
different needs, preset 18 kinds of functions, and can set based on user needs, customize and add specific functions.
The product was isolated power supply industrial power modules, it has a temperature protection, over current protection
and short circuit full protection, high and low voltage isolation. work is very stable.
and short circuit full protection, high and low voltage isolation. work is very stable.
input with optocoupler isolation, enhanced anti-jamming capability, to ensure stability.
(1) the module 18 kinds function, to meet the needs of more applications,
(2) Increase the supply anti—reverse function, and does not take the wrong power supply is damaged module,
(3) The use of top-quality. high—voltage power supply modules, discrete power supply before replacing the system more stable and reliable,
(4) There are 0. 1 seconds / 1 second / l in three timing, timing accuracy of 0. 01 seconds,
(5) Increase automatic power saving feature, users can independently set.
Module Function:
Function 1—8 start at power on,
Function 9—18 is triggered(can add button directly on the trigger terminal, or external trigger source) to start.
Function 9—18 is triggered(can add button directly on the trigger terminal, or external trigger source) to start.
delay time T1 and T2 in 0.1second —270 hour Adjustable
Notes: If you use external (high level, more than 20mS) trigger source, should use same GND to the module GND.
Function 1:
Timing relay pull(delay turn on): Power-up. delay T1 time, then relay pull(switch connect),
trigger it, repeat the above functions.
Function 2:
Timing relay off(delay turn off): power-up , relay pull(switch connect), delay T1 time, then relay off,
trigger it, repeat the above functions.
Function 3:
Timing relay pull then off: Power-up, relay states off, delay T1 time relay pull(connect), delay T2 time, relay off,
trigger it, repeat the above functions.
Function 4:
Timing relay off then pull: After power, relay pull immediately, Relay off after delay time
T1, relay pull after T2 time, trigger it, repeat the above functions.
Function 5:
Infinite loop delay time off/on: After power, relay not connect, the delay time T1 then relay connect, Delay T2 time then relay disconnect,
and then cycle this working mode.
and then cycle this working mode.
trigger it, will restart the above functions.
Function 6:
Infinite loop delay time off/on: After power, relay connect, the delay time T1 then relay disconnect, Delay T2 time then relay connect,
and then cycle this working mode.
and then cycle this working mode.
trigger it, will restart the above functions.
Function 7:
Finite loop timing mode: Based on the function 5, increasing the number of cycles , NX cycles adjustable
between 1—9999 times.
Function 8:
Finite loop timing mode: Based on the function 6, increasing the number of cycles , NX cycles adjustable
between 1—9999 times.
Function 9:
Latching relay modes: trigger, the relay pull, trigger again relay disconnected.
Function 10:
Trigger relay modes: with trigger relay pull, without trigger, relay disconnected.
Function 11:
Trigger timing pull: After power relay does not act.
Trigger it. delay T1 time, then relay pull(switch connect),
trigger it again, repeat the above functions.
Function 12:
Trigger timing off After power relay does not act.
Trigger it, relay pull(switch connect), delay T1 time, then relay off,
trigger it again, repeat the above functions.
Function 13:
Trigger timing pull and then disconnect: After power relay does not act.
Add trigger start, other working mode is same to Function 3.
Function 14:
Trigger timing disconnect and then pull : After power relay does not act.
Add trigger start, other working mode is same to Function 4.
Function 15:
lnfinite loop timing mode1: After power relay does not act.
Add trigger start, other working mode is same to Function 5.
Function 16:
Infinite Loop Timing Mode 2: After power relay does not act.
Add trigger start, other working mode is same to Function 6.
Function 17:
Finite loop timing mode 1: After power relay does not act.
Add trigger start, other working mode is same to Function 7.
Function 18:
Finite loop timing mode 2: After power relay does not act.
Add trigger start, other working mode is same to Function 8.
Working and Setting.
Connect to Power - Module work and display countdown.
Select function and set time:
(1) long press SET to enter the function selection, display P-0X,
(X: 1-18) click the SET button to select the corresponding function and click Enter to confirm.
(2) click(or Pressx10) UP / DOWN to add and subtract T1 time, click Enter to confirm. If your setting have T2, it will show T2 time
(3) click(or Pressx10) UP / DOWN to add and subtract T2 time, click Enter to confirm.
Set time range: long press UP key,
Display T1-X (--01/02/03/04/05), set T1 time range, press UP key X scroll, click SET key to confirm.
Then display T2-X(--01/02/03/04/05), set T2 time range, press UP key X scroll,
click the Enter key to save.
[after set the time range, the display show 0000 or CA03, the module is stand by, can trigger it or re-connect power supply to run the modure]
click the Enter key to save.
[after set the time range, the display show 0000 or CA03, the module is stand by, can trigger it or re-connect power supply to run the modure]
--01:0.01 seconds range (0.01—99. 99 seconds)
--02:0.1 second range (0.1—999.9 seconds)
--03:1 second range (1—9999 seconds)
--04:1 minute range (1—9999 points)
--05:1 hours range (1—9999 hours)
Interface:
Relay outputs: 3—wire interface, all interfaces are terminals
1, CK: normally open relay interface, the relay pull before the vacant , relay pull after
short with COM
2, COM: Common interface Relays
3, CB: normally closed relay interface COM relay shorted before and after the pull—vacant
Load capacity: normally open port maximum load capacity: DC 0—30v/l0A, AC 0—2500v/l0A
NC port maximum load capacity: DC 0—28v/l0A, AC 0—l25v/l0A
Load capacity: normally open port maximum load capacity: DC 0—30v/l0A, AC 0—2500v/l0A
NC port maximum load capacity: DC 0—28v/l0A, AC 0—l25v/l0A
Items will be shipped within 1~2 working days after payment received and cleared.(excluding Saturday, Sunday & Holiday)
Notes: Sometimes some parcel may need more time due to hot logistic season, or stuck in custom.
Tips: Standard shipping is traceable and faster, if you need, can select standard shipping and pay.
Pls contact us if you need expedited express shipping, we can provide this service.
Make sure and provide us with correct, precise, detailed shipping address.
Notes: Sometimes some parcel may need more time due to hot logistic season, or stuck in custom.
Tips: Standard shipping is traceable and faster, if you need, can select standard shipping and pay.
Pls contact us if you need expedited express shipping, we can provide this service.
We only accept payment via PayPal.
The buyer is responsible for any applicable import duties and local taxes.
Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.
All the items will be tested before shipping. Purchase with the confidence!
We maintain the excellent service standards
and strive for 100% customer satisfaction and 
Positive feedback.If you have any problem, please do feel free to contact us before leave Neutral
or Negative 
feedback, so that we can satisfactorily your concerns.
Buyer contact us through eBay message, describe the problem if possible attach the photo.
Before communication, please don't open the return case or dispute.
We afford all cost if it's our fault. Refund or exchange.
We strive to provide you with the best service, reply your question within 24 hours.
Business time: 9:30~21:30 (GMT+8) exclude the weekend and holidays.
-->Contact us
