Astronomical Telescope Mounting Hardware Dovetail Plate for Celestron 8SE/C8/C8HD

Features:

Schmidt-Cassegrain telescope metal guide rail plate
Suitable for installing guide scope, guide box, finder scope and other accessories on the primary mirror of Celestron 8SE/C8/C8HD. 
It also can be used as a handle, but please pay attention to ensure safety while lifting, blue/ black/ red colors are available.

Precautions for installation of guide rail base:

1. Remove the screws from the lens barrel and replace them with the long screws provided. Keep the original screws in place for future use, 8SE/C8/C8HD has one screw at the objective end, two screws at the eyepiece end

2. First, tighten the screws by hand. If the screws cannot be fully inserted or cannot be tightened after a few turns, it is possible that the screws have been selected incorrectly. Do not force the installation again.

3. For the end with two screws, do not tighten one side at a time when tightening the screws. Tighten evenly multiple times. If one side is tightened at a time, the other side may not be able to tighten the screws, or the screws may not be fully tightened, which can pose a safety hazard.

Packing list:

1x Mounting plate for 8SE/C8/C8HD