d-9845
Electric Rechargeable Shock Anti-Bark E-Collar Pet Dog Training Remote Control
Specification:
-
Brand new
-
Material: ABS
-
Color: Black
-
Size: As the Pictures Shown
-
Effective Remote Control Range: 300m
-
Remote Control Transmitter Unit Power: 2* 4LR44 6V Battery (NOT INCLUDED)
-
Collar Receiver Power Supply: 2* AAA 1.5V Battery (NOT INCLUDED)
Features:
-
Provided with 100 levels of vibration and 100 levels of static shock stimulation, free to alter the intensities with up & down button.
-
Clear LCD screen allows easy reading of working status for operation and control convenience.
-
Four working modes are available: static shock mode, vibration mode, beep mode, and light mode, fully accommodate any training method preferred by the users.
-
With an effective range of up to 300 meters for practical remote control experience and effortless curbing disobedience around the house, yard or even a short range walk in the park.
-
Power saving design with automatic standby function and automatic shutoff function, the receiver will TURN OFF if unused for 4 minutes and the transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minute.
-
Adjustable belt length with maximum length up to 18inches, two pairs of metal prong (short/long) for easy replacement, widely suit dogs in different body sizes with varied fur thickness .
-
Ideal beginner training system for only 1 receiver, a tone button activates a tone on the receiver and any movement will activate the receiver into STANDBY MODE.
How to use the Transmitter:
-
Step 1. To install the batteries, open the battery cover, which is at the back of the transmitter.
-
Step 2. Install the battery(2 x 4LR44 6V Batteries are NOT INCLUDED) in the transmitter and ensure the polarity is correct.
-
Step 3. The transmitter will be TURN ON automatically.
-
Step 4. Press the buttons one by one and the LCD images will change.
-
Step 5. Press the up and down buttons on right hand side to set level.
-
Step 6. The LED light can be used for giving training signals.
-
Step 7. The transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
-
Step 8. In STANDBY MODE, press any button(except LED light button) to wake it up.
-
Step 9. To TURN ON the transmitter, hold mode button for at least 5 seconds.
How to use the Receiver and Code:
-
Step 1. To install the batteries.
-
Step 2. Remove the cover.
-
Step 3. Install the batteries (2xAAA 1.5V Batteries are NOT INCLUDED), make sure the polarity is correct.
-
Step 4. There is a beep right after installing the batteries in the receiver.
-
Step 5. Go to the transmitter and choose 1 or 2 channel to encode by pressing the channel button 1/2 in the transmitter.
-
Step 6. Then press the LAUNCH button on transmitter immediately.
-
Step 7. The receiver will beep - it is now encoded to the transmitter.
-
Step 8. Replace cover and tighten metal probes.
Package Included:
Note:
-
Please allow minor deviation due to manual measurement.
-
Due to the difference between different monitors in each computer, the picture may not reflect the actual color of the item.
|