Antenna - The WMM8G-7-38-03NJ antenna is a high gain directional 2x2 MIMO signal boosting antenna for 4G and some 5G networks. Incorporating two separately fed wideband elements in a single housing the WMM8G is equipped to provide client side MIMO and diversity support for 4G and some 5G networks. The rugged, weatherproof housing is designed for outdoors wall or mast mounting.
https://www.panorama-antennas.com/download/Installation-Instructions/SW3-665_EN.pdf
https://www.panorama-antennas.com/download/datasheet/WMM8G-7-38-[VAR].pdf
2x 10 Meter Super Low Loss RU400 Coaxial Cables - RU400 is high quality heavy duty coaxial designed for reducing loss and withstanding rough weather conditions. Each cable is terminated with N-Type male ends which are rated for up to 11Ghz.
Each cable is fully assembled by wireless9 here in Australia to ensure a quality finished cable. Our RU400 cable is sourced locally and manufactured similar to LMR400. When it comes to cabling we’ve gone straight for the best cutting no corners. More information on RU400 can be found https://zcg.com.au/wp-content/uploads/pdf/10-RU400_LowLoss.pdf
2x Low Loss RG316 Pigtails - RG316 low loss cable is great for very short runs no greater than 50cm which makes it the perfect choice for pigtails. More information on RG316 can be found https://zcg.com.au/wp-content/uploads/pdf/10-RG316_cable.pdf
These pigtails are terminated with N-Type male and TS-9 connectors to fit the range Advanced and Nighthawk modems. Fully assembled by our wireless9 team here in Australia.
2x N-Type Bulkheads with Wall Plate - Bulkheads are great units to securely connect two cable ends together between a wall surface. This helps prevent damage to your main coaxial cable run if the connectors on the inside of your house are accidentally bumped.
Metal Cable Ties - For securing the coaxial cable run outside to a mast or other objects. Metal cable ties are strong and designed to last long term from direct sunlight and heat exposure.
Self Amalgamating Tape - Make the coaxial connectors completely weather proof by eliminating exposure to water. This tape is silicone-rubber based which stretches and sticks to itself as it’s wrapped around the cable providing the perfect weather-resistant seal.
Mounting Hardware - Included are mounts for mast or wall installation. Also a clip for desktop mounting however this antenna performs best installed outside.
Frequency Range (MHz) - 698-960, 1710-2700, 3400-3800
Radiation Pattern - Directional
Typical VSWR - < 2.5:1
Peak Gain (Excluding cable loss) - 6dBi (698-960) 9dBi (1710-2170) 9dBi (2396-2700) 9dBi (3400-3800)
Correlation Coefficient (all bands) - < 0.1
Nominal Impedance - 50Ω
Dimensions (mm) - Height 230 (9”) Width 180 (7.1”) Depth 94 (3.7")
Material - U.V. Stable, impact resistant ASA
Fixing - Wall mount / Mast mount / Desk mount
Type - 2 x CS29 Coax (double shielded RG58)
Length - 5 (16’)
Termination - 2× N-Type (m)
Telstra - 4GX 700MHz, NextG™ 850MHz, 4G 900MHz, 4G 1800MHz, 3G/4G 2100MHz, 5G 3500MHz, 5G 3600MHz
Optus & Virgin Mobile - 700MHz, 900MHz, 1800MHz, 2100MHz, 2600MHz
Vodafone - 850MHz, 900MHz, 1800MHz, 2100MHz, 2300MHz
Nighthawk M1, M2, M5 & M6
Orbi 4GX Router
Aircard 790S Mobile Hotspot (WiFi 4G Advanced III)
Aircard 785S Mobile Hotspot (4G My Pocket Wi-Fi Ultimate)
Aircard 782S Mobile Hotspot (WiFi 4G Advanced)
Smart Cradle DC112A (Aircard Smart Cradle)
Ethernet and Antenna Charging Cradle for 782S and 785S
E5786 (WiFi 4G Advanced Pro)
AirCard 320U (USB 4G AirCard 320U)