9IMOD 540 550 Brushed Motor for 1/10 RC Car Crawler Axial SCX10 AXI03007 JL90046 TRX4 TRX6 Redcat Gen8 Tamiya HSP HPI Wltoys Kyosho RC Spare Parts
540 550 External Brushed Motor
Features:
540/550 3-Slot Brushed Motor
Rebuildable with an easily accessible commutator and brushes and springs
High strength magnets for unmatched brush-motor performance
Specifically designed for R/C vehicles that require precise movement control
Excellent torque and long-run times
Direct-Solder Wiring Tabs for flexible soldering options
Dual-ball Bearings Design

Specifications:
540 External Brushed Motor
Waterproof 12T/17T/22T/29T/40T
12T: Current: 5.0; Speed: 32000rpm
17T: Current: 3.7; Speed: 24000rpm
22T: Current: 2.7; Speed: 19000rpm
29T: Current: 1.9; Speed: 15000rpm
40T: Current: 1.7; Speed: 12000rpm
Craft: Bright plated shell, red copper hardware, oil bearing
13T/21T/35T/45T/55T/80T
Motor diameter: 36mm
Motor shaft length: 12mm
Shaft diameter: 3.17mm
Use voltage: 7.4V
Weight: 184g
Suit for 1/10 RC Car

550 External Brushed Motor
Waterproof 11T/16T/23T/28T/37T
11T: Current: 3.1; Speed: 22000rpm
16T: Current: 3.0; Speed: 19000rpm
23T: Current: 2.1; Speed: 15500rpm
28T: Current: 1.4; Speed: 12000rpm
37T: Current: 1.3; Speed: 9500rpm
Craft: Bright plated shell, red copper hardware, oil bearing

Note:
1. Speed ± 10% rpm (test after running for 1 minute)
2. The motor supports a maximum voltage of 12V. Recommend uses 7.2-7.4V batteries
3. Motor shaft diameter: 3.17mm
4. This motor is fully waterproof design and can be used in water for a long time. However, after playing with water, it is necessary to pay attention to three maintenance points:
①. Be sure to immediately maintain the motor bearings with lubricating oil.
②. It is important to blow dry the water between the copper head and the carbon brush as soon as possible, and do not wait for it to air dry naturally.
③. The plugs on the electric and motor should also be blown dry as soon as possible.

540 Built-in Brushed Motor
Remarks: "T" mean the number of turns. 20T and 27T motors fit high speed RC Car. 35T 45T motors fit large torque RC Crawler.
Features:
High torque magnet and rotor
Build in capacitor for minimizing glitches
Custom made 540 Steel case
Tuned for Rock Climbing and Scale Driving

Specifications:
Body Length: 50mm
Diameter: 35.5mm
Output Shaft Length: 11mm
Output Shaft: 3.1mm
Voltage Range: 7.4V
Suit For: 1:10 RC Car / Boat

550 Built-in Brushed Motor
Remarks: "T" mean the number of  turns. 12T and 21T motors fit high speed RC Car. 29T 35T motors fit large torque RC Crawler.
Features:
550 Brushed Motor is a budget motor built for messy, dirty, off road action.
This powerful 550 motor has a 30% longer armature than a standard 540 size motor for extreme monster torque.
Heat-resistant motor with built-in cooling fan, allows fast speeds, long runtime, and long lifetime.
High strength magnets ensure maximum performance.
Oil bearings, high torque and low noise.

Specifications:
Body Length: 55mm
Diameter: 36mm
Output Shaft Length: 11mm
Shaft Diameter: 3.175mm
Voltage Range: 7.4V
Suit For: 1:10 RC Car / Boat

Package List:

1 * Brushed Motor

Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!

Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.

After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.