DS1302 Rotating LED Display Alarm Electronic Clock Module DIY KIT LED Temperature Display
The electronic clock adopts the principle of
digital tube display design, adopts the design of plug-in components, and has
high success rate. Contains six Time animation, effective display of time and
various functions. LED flashing light includes four offline animation display
modes, lighting effects The fruit is very decorative, bringing a good aesthetic
to the home and table. The electronic clock is alternately displayed with time
and temperature. Precise and with power-down memory travel time function. With
an alarm clock function, it can be turned off. With light control function,
according to the environment Adjust the brightness.
DS1302 Rotating LED Display Alarm Electronic Clock Module DIY KIT LED Temperature Display
Dear Sir/Madam,
Good day to you !
Thanks for referring our products.
This electronic learning kit is designed for youngsters and hobbyists to learn fundamental concepts and practice skills such as component identification, soldering, and testing. Before diving into programmable electronics such as Arduinos, this book is highly recommended for anybody interested in electronics.
Working Principle
Using single-chip microcomputer
as the main control, use DS1302 travel time chip to provide accurate travel
time clock source, combined with digital tube And LED lights show specific time
values. Combined with the temperature light intensity detecting element, it can
achieve the brightness adjustment and temperature check attached. Test
function. The control button of the single chip is combined with the necessary
key input adjustment function, and the clock sound is processed by the single
chip and then beep.
Common mistakes done by user :
1. The welding sequence is wrong.
It is recommended to solder the LED lamp first, then solder the back component,
solder the digital tube, and finally insert the chip. 2. LED lights pay
attention to the positive and negative poles, long legs and positive poles. 3.
The chip notch and the base notch must be consistent with the notch identified
on the board. 4. Buzzer pay attention to positive and negative poles, long foot
positive pole, resistance resistance value to follow Consistent on the logo. 5.
The triode should be inserted in the same shape as the board. 6. The digital
tube pays attention to the direction, and the decimal point is below. 7. Power
supply pay attention to the positive and negative poles, the power supply DC
voltage is 5V. 8. Check for solder shorts and solder joints. This phenomenon is
common. 9. If the display is abnormal or the time is not gone, remove the
DS1302 and buttons. Battery, then plug in the DS1302, do not plug in the
battery, and then power on, Put the battery on after normal. 10. If the
individual lights are not lit, check the solder shorts of the unlit lights and
Soldering, check it, and change the light if it is not lit. 11. If the four
digital tubes have the same segment code that is always on and highlighted,
Some LEDs are also always on because of an electrostatic breakdown of an LED. a
digital tube that causes a single-chip pin to share with this lamp.
Rotating LED electronic clock
Appendix: Specific identification
methods for four-ring and five-ring color ring resistors
Payment:
We accept Paypal only, It is fast, Easy and Safe.
Payment must be completed within 7 days.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.
Shipping:
Free Shipping to Worldwide.
Orders processed within 24-48 hours of payment verification. it will take 15-25 days for delivery. but Customs will random inspection some parcel, so that's why some parcel need more than four weeks to arrive. Shipping time is only estimated and not guaranteed.
We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address.
Package will Shipping by E-Package with Tracking Number (Additional charges apply).
Items are shipped via China wordwide shipping.
Guarantee:
Good Good quality. Buy with confidence!
If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
Not accept returning of electronic components.
Full refund after we receive our original item, Note: Return shipping is to be paid by the Buyer.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Thanks & Regards
DS1302 Rotating LED Display Alarm Electronic Clock Module DIY KIT LED Temperature Display
Dear Sir/Madam, Good day to you ! Thanks for referring our products. This electronic learning kit is designed for youngsters and hobbyists to learn fundamental concepts and practice skills such as component identification, soldering, and testing. Before diving into programmable electronics such as Arduinos, this book is highly recommended for anybody interested in electronics.
Working Principle Using single-chip microcomputer as the main control, use DS1302 travel time chip to provide accurate travel time clock source, combined with digital tube And LED lights show specific time values. Combined with the temperature light intensity detecting element, it can achieve the brightness adjustment and temperature check attached. Test function. The control button of the single chip is combined with the necessary key input adjustment function, and the clock sound is processed by the single chip and then beep. Common mistakes done by user :
1. The welding sequence is wrong.
It is recommended to solder the LED lamp first, then solder the back component,
solder the digital tube, and finally insert the chip. 2. LED lights pay
attention to the positive and negative poles, long legs and positive poles. 3.
The chip notch and the base notch must be consistent with the notch identified
on the board. 4. Buzzer pay attention to positive and negative poles, long foot
positive pole, resistance resistance value to follow Consistent on the logo. 5.
The triode should be inserted in the same shape as the board. 6. The digital
tube pays attention to the direction, and the decimal point is below. 7. Power
supply pay attention to the positive and negative poles, the power supply DC
voltage is 5V. 8. Check for solder shorts and solder joints. This phenomenon is
common. 9. If the display is abnormal or the time is not gone, remove the
DS1302 and buttons. Battery, then plug in the DS1302, do not plug in the
battery, and then power on, Put the battery on after normal. 10. If the
individual lights are not lit, check the solder shorts of the unlit lights and
Soldering, check it, and change the light if it is not lit. 11. If the four
digital tubes have the same segment code that is always on and highlighted,
Some LEDs are also always on because of an electrostatic breakdown of an LED. a
digital tube that causes a single-chip pin to share with this lamp.
Rotating LED electronic clock
Appendix: Specific identification
methods for four-ring and five-ring color ring resistors
Payment: We accept Paypal only, It is fast, Easy and Safe. Payment must be completed within 7 days. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES. Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment. Shipping: Free Shipping to Worldwide. Orders processed within 24-48 hours of payment verification. it will take 15-25 days for delivery. but Customs will random inspection some parcel, so that's why some parcel need more than four weeks to arrive. Shipping time is only estimated and not guaranteed. We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address. Package will Shipping by E-Package with Tracking Number (Additional charges apply). Items are shipped via China wordwide shipping. Guarantee: Good Good quality. Buy with confidence! If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it. Not accept returning of electronic components. Full refund after we receive our original item, Note: Return shipping is to be paid by the Buyer. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Thanks & Regards |