How To Use
1) Please check whether the spring touches the tip of the contact screw.
2) Please adjust the contact screw to debug.
3) Assemble the handle, use the hexagonal tool to adjust the two screws on the tattoo handle (the size of tattoo tips should match tattoo needles); for example: if you choose the 5RL tattoo needle, then the tattoo tip you should use is 5RT.
4) Insert the tattoo needle into the tattoo tube, and the end of the needle is hung on the rubber O-rings.
5) Loosen the screw of the tattoo handles and contact with tattoo tube.
6) Insert the tattoo needle into the tattoo handle, adjust the length of the needle or tattoo tube, (The exposed length of the needle is recommended to be 1-2mm).
7) Attach 2-3 rubber bands to the machine for 2 turns. (Note: Please do not exceed 3 turns to avoid adding too much pressure to the needle).
8) Attach the power supply, foot pedal and clip cable. (Note: Make sure that the power cord is well plugged in)
The tattoo clip cable should be hooked onto the tattoo machine and the end must be plugged into tattoo power supply, the tattoo foot pedal should also be plugged into the power supply, turn on the power supply, press the foot pedal, and quickly
vibrate the needle by setting the power button.
Package Contents
Black Aluminum Tattoo Grip*1
Tattoo Machine #18*1
6 Kinds Of Tattoo Accessories #01*1
6PC 20ML Tattoo Ink*1
5PC Disposable Needles (5Rt)*2
5PC Tattoo Needles (5RL)*1
Dual Digital Tattoo Power Supply #02*1
Tattoo Clip Cord&Pedal*1