This turntable is available in 220V/50Hz or 110V/60Hz (for example UNITED STATES)!
Restored 160 stainless steel and high gloss paint
Our turntables are lovingly put together, modified and assembled by hand.
Each of them is unique and differs in model, color, veneer grain or other details.
The high-quality housings are restored or newly manufactured using qualified craftsmanship.
Electrical components are checked, Moving parts oiled and wearing parts replaced.
A final endurance test rounds off the complex work.
The customer receives a top-class device.
Item description:
Limit switch: No
Inner plate: metal
Spindle: 10mm
Basic dimensions: Width: 54cm, depth: 45cm, height 15cm
New housing:
The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws.
It has been professionally finished with multiple coats of high gloss varnish sealed and polished with appropriate intermediate sanding.
The connection panel for all required cable connections is located on the back.
New faceplate:
New cover plate made of 1mm Brushed stainless steel
New Ortofon OM5E cartridge:
With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.
The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.
New audio cable:
Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.
The turntable:
The turntable is made in five complex and time-consuming steps polished to a high shine.
The high-gloss polish gives your record player a unique look.
With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.
New spikes made of chrome-plated stainless steel:
So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.
Resonances and feedback are thus effectively prevented.
New drive belt:
This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).
New stainless steel record weight:
With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.
--
The following Parts are as Accessoriesör erhäliltic and not component this auction:
The following parts are available as accessories and not included in this auction:
Cartridge MM system including installation:
Ortofon OM 10 (elliptical cut): €60
Ortofon OM 20 (naked elliptical cut): €160
Ortofon OM 30 (Nude Fineline cut): €260
Ortofon OM 40 (Nude Fritz Gyger 70 cut): €430