Appearance | black-brown or red-brown viscous fluid |
Carrier Liquid | synthetic ester oil |
|
|
| CGS Units | SI Units |
Saturation Magnetization (Ms) | 220 Gauss | 22 mT |
Viscosity @27°C | 200 cP | 200 mPa·s |
Density @25°C | 1.16 g/cc | 1.16 103 kg/m3 |
Pour Point | -35 °C | -35 °C |
Flash Point | >200 °C | >200 °C |
Thermal Conductivity @38°C | 150 mW/(m·K) | 150 mW/(m·K) |
Surface Tension @25°C | 32 dynes/cm | 32 mN/m |
Coefficient of Thermal Expansion | 7.5 x 10-4 ml/ml°C | 7.5 x 10-4 /K |
It is Suitable for Use With Tweeters, Super Tweeters & Compression Drivers.
Audio Ferro Fluid improves the Performance of High Frequency (HF) and Midrange Drivers.
It works by Damping the Impedance at Resonance to effectively Lower Distortion, it Helps to Smooth the Frequency Response from Most Tweeters & Mid Range Drivers, this can Increase Thermal Power Handling.
These Retro Fit Kits Come with Pre-Measured (900uL) Packets of Ferro Fluid.
This can be used to Replace the Old Ferro Fluid in Loudspeaker Air Gaps when Replacing Diaphragm and Coil Assemblies.
Ferro Fluid is Used by Many Loudspeaker Manufacturers & can be Used with Almost All Tweeters & Mid Range Drivers.
Great for Retro Fit / Replacement or new Tweeter & Mid Range Driver Applications.
Damps Impedance at Resonance.
Helps to Reduce Distortion.
Conducts Heat away from Voice Coils.
Increases Power Handling Capacity.
These Retro Fit Kits Come Complete with Cleaning Strips and Instructions.
Please Note: This fluid can Permanently Stain Clothing and other Materials.
It is Recommended that You Use Protective Gloves when using Ferro Fluid (And when Cleaning Old Ferro Fluid from Your Tweeters & Mid Range Drivers.
All Items are Sent by Signed For & Recorded Delivery.