OBC-528G Gas Mixer Argon Carbon Dioxide Proportioner Accessories Welding
Gas Mixing Proportioner (-two models)
-The gas proportioner is specially designed for gas shield welding.
-The gas proportioner is specially designed for mixed gas shield welding.
-If used correctly If used correctly, it not only reduces welding costs, but also improves welding efficiency and quality.The gas can be used in a variety of ways.
Principle and use:
The gas mixer is connected to the carbon dioxide (C02) gas at one end and to the argon (Ar) gas at the other. The two types of The two gases enter the two-stage pressure equaliser through a one-way valve to balance the difference in input pressure between the two gas sources. The two gases with equal pressure The two gases at equal pressure are precisely adjusted to the concentration ratio by means of a coaxial proportional adjustment valve with a precision spool. A discharge pipe is included as an accessory. Multiple gas outputs are possible for multiple welding machines. The ideal effect is achieved with adjustable pressure and concentration ratio.
The gas mixer is connected to the carbon dioxide (C02) gas at one end and to the argon (Ar) gas at the other. The two types of The two gases enter the two-stage pressure equaliser through a one-way valve to balance the difference in input pressure between the two gas sources. The two gases with equal pressure The two gases at equal pressure are precisely adjusted to the concentration ratio by means of a coaxial proportional adjustment valve with a precision spool. A discharge pipe is included as an accessory. Multiple gas outputs are possible for multiple welding machines. The ideal effect is achieved with adjustable pressure and concentration ratio.
Specifications:
Model No: 0BC-528G
Inlet pressure: 0.4-1MPa
Output pressure: 0.35MPa
Maximum flow rate: 50L / min
Flow meter accuracy: +4%
Proportioning range: 0- 10% (C02 content)
Proportioning accuracy: 4%
Inlet connection: M16*1.5RH
Outlet connection: M16*1.5RH
External dimensions: (L)240x(W)130*(H)200
Weight: 7.5kg
Inlet pressure: 0.4-1MPa
Output pressure: 0.35MPa
Maximum flow rate: 50L / min
Flow meter accuracy: +4%
Proportioning range: 0- 10% (C02 content)
Proportioning accuracy: 4%
Inlet connection: M16*1.5RH
Outlet connection: M16*1.5RH
External dimensions: (L)240x(W)130*(H)200
Weight: 7.5kg
Installation and operation:
1. Connect input 1 and input 2 to the output of the pressure reducing valve of carbon dioxide (C02) and argon (An gas source) respectively. The pressure is generally required to be in the range of 0 . 4 - -0.6 MPa range, it is recommended that the two gas sources have equal pressure values.
2. The output connector is connected to the gas pipe of the welding machine via a rubber hose.
3. Adjust the carbon dioxide (C02) concentration to any value from 0 to 50% according to the needs of the application, e.g. For example: to adjust the gas mixture output flow rate| 5L 1 min, the mixing ratio is: 20% CO2 880% argon to be Argon flow rate is adjusted to 12 litres CO2 flow meter to adjust the flow rate: 3 litres.
1. Connect input 1 and input 2 to the output of the pressure reducing valve of carbon dioxide (C02) and argon (An gas source) respectively. The pressure is generally required to be in the range of 0 . 4 - -0.6 MPa range, it is recommended that the two gas sources have equal pressure values.
2. The output connector is connected to the gas pipe of the welding machine via a rubber hose.
3. Adjust the carbon dioxide (C02) concentration to any value from 0 to 50% according to the needs of the application, e.g. For example: to adjust the gas mixture output flow rate| 5L 1 min, the mixing ratio is: 20% CO2 880% argon to be Argon flow rate is adjusted to 12 litres CO2 flow meter to adjust the flow rate: 3 litres.
Notices:
1. When the welding quality changes significantly, indicating that a gas cylinder pressure is reduced, the need to replace or adjust the gas cylinder output Pressure, incense will affect the concentration ratio accuracy.
2. Carbon dioxide (C02)_ and argon (Ar) gas source and proportioner should be connected securely to prevent leakage causing harm.
3. The carbon dioxide (c02) input and the argon (An) input must be connected correctly.
4. The input pressure of carbon dioxide (C02) and hydrogen (Ar) must be within the range of 0.4-0.6Mpa, otherwise it will Otherwise the accuracy of the concentration ratio will be affected.
1. When the welding quality changes significantly, indicating that a gas cylinder pressure is reduced, the need to replace or adjust the gas cylinder output Pressure, incense will affect the concentration ratio accuracy.
2. Carbon dioxide (C02)_ and argon (Ar) gas source and proportioner should be connected securely to prevent leakage causing harm.
3. The carbon dioxide (c02) input and the argon (An) input must be connected correctly.
4. The input pressure of carbon dioxide (C02) and hydrogen (Ar) must be within the range of 0.4-0.6Mpa, otherwise it will Otherwise the accuracy of the concentration ratio will be affected.
Package includes:
1 x Gas Mixer
Note:
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Please allow slight manual measurement deviation for the data.
On 18/12/2023 at 14:32:45 AEDT, seller added the following information: