The sound of Pink Floyd's Wish You Were Here in a pedal!

The Hi Power painstakingly replicates the classic gear that shaped Pink Floyd’s classic Wish You Were Here album.

On the right side, you will find a recreation of the Colorsound Power Boost, featuring true-to-the-original BC184 transistors running at 18V and an ultra-flexible 2-band Baxandall EQ circuit.

Crazy Tube Circuits added extra features, like a Master volume control, a reverse-log Gain control (to ensure better transition from clean to mean) and a toggle switch that engages a higher gain mode.

On the left side of the Hi Power, you will find an all-analog circuit set to emulate the sound and feel of a Hiwatt amplifier.

Following the path of the famed British amplifier, the circuit offers authentic amp tone and feel. From the big bold high-headroom clean sounds to the face-melting crunchy tones!

A Headroom toggle switch selects between the high headroom 100W power section provided by a quartet of EL34s, or the lower headroom provided by a 50W power section with a pair of EL34s.

Similar in operation to the original amp design, the Master volume control was designed to produce more gain at higher settings.

Crazy Tube Circuits took the design a step further by adding a switch to select between input channels.

You can select between the full frequency response of the Normal channel, the increased presence and tight low end of the Bright channel input or the enhanced frequency response and added gain of those inputs linked together!

The pedal also features an FX loop to connect pedals between the two sections or use them as independent effects with a switcher.

 

Video demo of  the Crazy Tube Circuits Hi Power.

 

Crazy Tube Circuits Hi Power Overdrive Pedal features:

• Replicates David Gilmour’s Hiwatt amp and Colorsound pedal combination.

• Right side faithfully reproduces the classic Colorsound Power Booster.

• Packs true-to-the-original BC184 transistors and a flexible 2-band Baxandall EQ circuit.

• Left side packs classic Hiwatt amplifier tones.

• Headroom switch selects between a high headroom 100W mode, or a more compressed 50W mode.

• Connect other pedals between the two sections via the FX Loop.

• Runs internally at 18V DC for increased headroom and tube-like performance.

• Power: 9V DC.

• Current Draw: 100mA