Cnc Tool Setter Router Probe Z Axis Auto Adjustment Tool Touch Setting Sensor US

Specifications:

Model : Automatic tool setting

Color : Black + Silver

Material: Grinding 4S+ superhard alloy

Output mode: normally closed

 
Normally closed specification technical parameters
Output mode: BNC (normally closed)
Pre-trip: almost zero
Stroke: 5mm
Repeatability: 0.001mm (condition: operating speed 50-200mm / min)
Contact life: 3 million times
Protection structure: IP67
Contact force: 1.5N
Contact material: super hard alloy
Housing material: grinding 4S
Contact rating: DC24V 20mA (MAX) (recommended value 10mA) resistance load
Cable: 3m oil resistant °4 core ∞5 tensile strength 307N minimum bending radius R7
Protection tube: minimum bending radius 1 m R25
Alarm signal when the trip is exceeded
Output mode: BNC (normally closed) (2.5mm from the measurement signal)
Contact rating: DC24V 100mA (resistive load)

 

 

Installation instructions

1, the props and the tool setting device must be perpendicular to the contact surface, and vertically contact the contact surface, please install as much as possible on the workbench where the iron filing area is small.

2, please be sure to use the voltage within the rated power supply range, please control the DC10-30V, the current is below 20mA, the ambient temperature range is -25° C-70° C. 3. Please control the cutter tool diameter below 20mm and the cutter speed to be below 50-200mm/min. The tool center should fall to the center of the tool face

When using the blowing function, the air tube has a diameter of 6 mm and an inner diameter of 45 mm. Take care to remove the iron filings and cutting oil attached to the contact surface.

 

Terms and Conditions:

1, the contact can not exceed the stroke of the tool, otherwise the tool and the props will be damaged. (formed as 5.0mm)

2. Please do not release it immediately when touching the tool setting tool by hand to avoid damaging the internal structure of the tool setting tool.

3. When the tool and the tool setting tool are in contact with the tool setting, please do not release it immediately. The tool must be lifted off the contact surface vertically. It cannot be moved laterally. If it moves laterally, it will damage the tool setting tool.

4. When using the blowing function, the air tube has a diameter of 6 mm and an inner diameter of 4-5 mm. Take care to remove the iron filings and cutting oil attached to the contact surface.


Package include:
1 x CNC Z Axis Engraving machine Tool

 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feature 1Nice and Practical, High Quality Packaging
* Feature *stable performance and high quality
FeaturesFast shipping from US Warehouse
Transportation does not includecanarias
Manufacturer Warranty3 years
shipping noticeAlaska/Hawaii, APO/FPO,PO Box
BrandUnbranded
MPNDoes Not Apply
ModelAutomatic tool setting
ColorBlack + Silver
MaterialGrinding 4S+ superhard alloy
Output modenormally closed
Stroke5mm
Repeatability0.001mm
Contact life3 million times
Protection structureIP67
Contact force1.5N
Contact materialsuper hard alloy
Contact ratingDC24V 100mA (resistive load)
ControlCNC
Machine TypeZ-axis engraving machine tool setting instrument
EANdoes not apply
UPCDoes not apply
PushAuction

DataCaciques