Individual production! Please note the processing time stated on Ebay!


Individual production! Please note the processing time specified on Ebay!


This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)




We would also be happy to restore your Thorens to this look.


Restored Thorens TD-318 painted black and red two-tone

High gloss finish


Our turntables are lovingly put together, modified and assembled by hand.

Each of them is unique and differs in model, color and veneer grain.

The high-quality housings are restored or newly manufactured using qualified craftsmanship.

Electrical components are checked, Moving parts oiled and wearing parts replaced.

A final endurance test rounds off the complex work.

The customer receives a top-class device.


Item description:

Limit switch:      Yes

Inner plate: plastic

Spindle: 7mm

Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cm


Housing:

Two-part paint job. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back.

Ortofon VM Alpha cartridge (included):

With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot.

Audio cable:

Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.

Turntable:

The turntable is made in five complex and time-consuming steps polished to a high shine.
The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.

Spikes made of chrome-plated stainless steel:

So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented.

The drive belt:

The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).

The following work will be carried out:

Um-or Installation of required components, revision of various electronic and mechanical components, adjustment and adjustment of the speeds, adjustment and adjustment of the suspension, checking and adjustment of the tonearm and cartridge, thorough cleaning of the entire record player, final acceptance and endurance test.


The following Parts are as Accessoriesör erhäliltic and not component this auction:
The following parts are available as accessories and not included in this auction:

Hood including hinges: 190

Cartridge MM system including installation:

Ortofon 2M Red (elliptical): 99
Ortofon 2M Blue (elliptical, naked): 220
Ortofon 2M Bronze (Fineline): 390
Ortofon 2M Black (Shibata): 599
Ortofon 2M Black LVB 250 (Shibata): 899

Audio-Technica VM740ML (microlinear): 339
Audio-Technica VM750SH (Shibata): 439
Audio-Technica VM760SLC (special line contact): 699

Cartridge MC System including installation:

Audio-technica AT-OC9XEB (elliptical): 279
Audio-technica AT-OC9XEN (elliptical, naked): 369
Audio-technica AT33EV(elliptical, naked): 499
Audio-technica ATPTG/II (microlinear): 599
Audio-technica AT33SA (Shibata): 799

Ortofon Quintet Red (elliptical): 330
Ortofon Quintet Blue (elliptical, naked): 470
Ortofon Quintet Bronze (Fineline): 660
Ortofon Quinted Black (Shibata): 940

Cartridge MI system (available either as MM or MC system):

Grado Opus 3 (maple wood, aluminum elliptical diamond): 349
Grado Platinum 3 (australian jarrah wood, aluminum elliptical diamond): 449
Grado Sonata 3 (Australian jarrah wood, aluminum elliptical diamond): 699
Grado Master 3 (Australian jarrah wood, machined boron diamond tip): 1199


With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has
With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. You can start with the VM Alpha and then improve the quality by using the next higher needle slot with the appropriate needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has