M-VAVE
Wireless Earphone Monitor Transmission System WP-10
Main Features
Thanks for choosing our Wireless earphone
monitor transmission system device. This is a wireless transmission product
specifically designed for teaching, performance and transmission audio signal.
We do our best to present you with this low noise, low latency, high-quality
resolution and effective long-distance transmission of wireless earphone
monitor transmission system. I hope you'll love it!
Main Features
l Lossless
professional sound quality.
l 2.4GHz
wireless transmission band,24bit/48KHz sample rate.
l 30
meters effective distance, get rid of the cable.
l Small
size, strong function, unique lavalier design, can be your mini waist bag
device.
l Blue
LED light for instructions, 1s to pair.
l Can
be used for 5 hours when fully charged.
l Switch
to choose mono/stereo, suitable for different devices.
l 16
levels adjustable volume buttons
Precautions
Power supply
This product has a built-in rechargeable
battery, the product accessories contain a factory standard with a drag two USB
charging cable. You can connect the charging head of your phone or your
computer's USB port to charge. Turn off the power switch while charging. Please
do not use it while charging, which will reduce battery life.
Connection
Always turn off power and other related devices
before the wireless device is disconnected, such as a camera or video recorder,
which will help avoid device failure and damage other devices.
Interference
In practice, wireless systems are affected by
two conditions:
(1)This device may not cause harmful
interference, and
(2)This device must accept any interference
received, including the interference that may cause undesired operation.
(3)Keep more than 3 meters distance between
Receiver unit and other WiFi transmitters such as routers
(4)In case of environmental interference from
other WiFi systems, shorten the distance between the receiver and transmitter
units.
Specification
Sample rate: 24bit/48KHz lossless digital
transmission sound quality
Wireless Band:2.4GHz Delay:<12ms
Range: 30 meters outdoor or 15 meters wall
distance
Built-in lithium-ion battery can be charged by
USB
Lithium battery capacity: transmitter
780mAh,receiver 550mAh
Charging device: USB Type C charging
Signal-to-noise ratio:-98dB
Dynamic range:>105dB
Frequency response: 20 to 20K Hz,+1dB/-3dB
Single body size (mm): 60(L) X45 (W) X20 (H)mm
Outer packaging dimensions (mm): 132 (W) x108
(W) x 65 (H)
Weight of a single body: 50g
Packaged weight:250g
Accessories included:
wireless earphone monitor transmitterx1,
wireless earphone monitor receiverx1,
user manualx1,
USB charging cablex1,
audio cablex2
Product Introduction
Transmitter
?3.5mm input jack: connect to audio equipment such as mobile phones,
sound cards, musical instruments and so on.
?Power status LED: low battery shows red; charging shows red; full
charge shows blue.
?Pairing status LED: flash slowly when not paired; flash quickly when
pairing; light is on and not flash when paired successful.
? Charging port: USB Type C charging cable for charging
? Power switch: switches unit on/off
?Pairing button: long press to enter pairing state
? According to your input devices to select mono/stereo.
MONO: guitar, bass, etc.
STEREO: mobile phones, sound cards, etc.
Product Introduction
Receiver
?3.5mm output jack: connect to receiving equipment such as
headphones, speakers and so on.
? Power status LED: low battery shows red; charging shows red; full
charge shows blue,
?Pairing status LED: flash slowly when not paired; flash quickly when
pairing; light is on and not flash when paired successful.
?Charging port: USB Type C charging cable for charging
?Power switch: switches unit on/off
?Pairing button: long press to enter pairing state
? According what you needed to use choose mono/stereo.
Note: The effect of the mono/stereo receiving
end mainly depends on the influence of the input.
? Volume button: adjust the output volume
How To Use
1.Use for connecting the wireless transmitter to
mobile phone or musical instrument, use for connecting the receiver to
headphones or speakers.
2.When transmitter and receiver did not plug in
power supply, and the light of them go to red, it indicates that the product
has insufficient power, need to be charged before using it.
3.Pairing: turn on transmitter and receiver then
long press the pairing button, the light of transmitter and receiver is on and
not flash indicates pairing successfully.
4.This wireless system product can support one
transmitter to send signals to multiple receivers. The pairing method is to
turn on the all receivers, long press the pairing button to enter the light
flashing pairing mode, then turn on the transmitter, long press to enter the
pairing mode , the lights are on and not flash indicate that the pairing is
successful,
5.The receiver of this wireless system product
also can support recording function. The transmitter can be connected to
musical instruments and other input , the receiver can be connected to the
mobile phone for recording(Note: The required wires need to be configured by
the user).
FAQ
1.Q: Device cannot be powered on and doesn't
work.
A: If the device unused for a long time, or
powered off during low battery but then doesn't charge in time. The battery
enters into protection mode due to low battery, and you need to charge it and
activate the battery.
2.Q:The device can be turned on, but cannot be
used and there is no sound?
A: Please check the pairing status light of the
transmitter and receiver, whether the state of the device is pairing
successfully or not,
3.Q: Strange noise while in use.
A: There can be strong electromagnetic
interference, too far transmission distance, too many transmission obstacles,
so most communications are lost. Please keep the transmission distance as short
as possible.
4.Q: Device cannot be charged properly.
A: Lithium batteries go into protective state
when they are low for a long time, so they need to be recharged about 10
minutes to activate the battery.
5.Q: Can multiple receiver receive the signal
from one transmitter at the same time?
A: Definitely yes. For specific operations,
please refer to Instructions 4.
Warning
l To
reduce the risk of electric shock or fire, do not expose the device in rainy or
humid conditions.
l Turn
the device off before charging, which avoids too long charging time.
l Prolonged
listening at high volume levels may cause irreparable hearing damage.
FCC Warning
FCC Warning Statement Changes or modifications
not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCCRules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
l Reorient
or relocate the receiving antenna.
l Increase
the separation between the equipment and receiver.
l Connect
the equipment into an outlet on a circuit different from that to which the
receiver is connected.
l Consult
the dealer or an experienced radio/TV technician for help.
Seller policy
Postage & Delivery
All products will be checked carefully and packed in good condition
before shipping.
In most cases, you will receive the product within 8-19 business days. And we offer free shipping
with all items!
About order handling time, usually we ship in 1-5 business day after receiving the clearing
payment. We do offer Expedited shipping methods.
Note:
Due to shipping policies restrictions, our shop is unable to ship to
Alaska, Hawaii, Puerto Rico, US Protectorates and APO/FPO address.
Your satisfaction is our aim!
Payment Policy
We gladly accept payment methods eBay approved.
Both of us must comply with the rules and requirements of the eBay. We
want to make sure the transaction is legal and compliant.
If you have any requirements or requests, please contact via eBay
message.
Your satisfaction is our aim!
(After-Sales Service) Return and Exchange
If the product you receive has quality problems, please contact us in
time, we will refund you or replace the product after confirmation.
Your satisfaction is our aim!
Feedback
If you have any problems, Please don't give us a negative comment
without reasonable communication, please contact us in time. We?ll deal with
your problems and demands as soon as possible, to help you save money, give you
the best service quality and attitude, you can also buy High-Quality products
from our store!
The most important of all, Your Satisfaction is our aim!