eBay

Product Description

【Vehicle CEL Doctor】The NT301 obd2 scanner enables you to read DTCs, locate bad O2 sensors, access to emissions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle.

【Accuracy】Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.

【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, Free Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.

【Smog Check Helper】Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident emissions test.

【Home Necessity】Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and one of the best gifts for Home and Autoshop Mechanics.

The Foxwell NT301 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include:

#1. Gas Cap

#2. Oxygen Sensor

#3. Air Fuel Ratio Sensor

#4. Mass Air Flow Sensor

#5. Ignition Coils

#6. Spark Plug Wires

#7. Spark Plugs

#8. Thermostat

#9. EGR Valve

#10. Evaporatative Emission Canister Purge Valve(EVAP)

#11. Catalytic Converter.

And the NT301 obdii code reader will read codes indicating these fault parts. After the car problems have been solved, Foxwell NT301 code reader car diagnostic tool can erase these trouble codes and turn off check engine light. (Note, MIL codes will come back resulted from maintenance failure. Please read Quick Start Guide and user manual carefully to understand and make the utmost of the full potential of NT301 tool. And download the Specification Sheet and User Guide of the Technical Specification Column in this page to better use NT301 auto scanner.) Plenty of Youtube videos are available for use instruction.

✔ FOXWELL NT301 OBD2 SCANNER

As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. However, most of them don't know they could make it off themselves with dozens of dollars - using NT301 obdii code scanner. This obd2 scanner could resolve most reasons which caused engine light on, and tell you what’s wrong with your car engine, and if it is necessary to be sent to workshop. Altogether, the Foxwell NT301 car diagnostic scan tool would save you much time and money. It is also a great choice if you are looking for an obd scanner well-built, easy-use with wide vehicle coverage. (Please note, UPDATE IS NOT NECESSARY before utilization, and NO NEED TO REGISTER on Foxwell website before update. The upgraded NT301 cable is long enough to use at the passenger seat. )

✔ Product Features:

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.

2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.

3. DTC definition can be automatically displayed after reading, press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

4. Reads freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.

5. Reads, records, graphs & playbacks(data logging) live sensor data.

6. Reads live O2 sensor/on-board monitor test data.

Full OBD Service Modes

The Foxwell NT301 OBD2 universal check engine light tool is made to easily read and erase engine codes. It is an enhanced OBD II and EOBD scanner that covers all obd2 protocols and all OBD diagnostic services, therefore it will work with virtually any vehicle equipped with obd2 and view more powertrain diagnostic data than other obd2 scan tool.

Specially Designed for Home Diagnostics

The obdii diagnostic scan tool is specifically designed for car owners to identify problems with their vehicles before taking them to a mechanic. It is therefore ideal for use at home, and is very easy to use. Moreover, it will save lots of car maintenance costs for you. Simply plug it in and hit enter. It supports all OBD II functions, and will therefore work for all vehicles compatible with obdii protocols.

Enhanced OBD II functions

NT301 obd2 scan tool can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier.

LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

Data Log: The NT301 auto code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.

DTC Help: Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.

Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Save Time and Money

Perform a complete diagnosis of your car anytime, anywhere with Foxwell NT301 check engine light diagnostic tool. It is designed for fast use so you can get the results you want in the shortest time with one-click hot keys for reading/clearing DTCs. It enables you repair the problem yourself, or let you know exactly what needs replacement in case you need to take your car to a repair shop. This helps you avoid blind maintenance and repair costs that could amount to hundreds or thousands of dollars. You also avoid being pushed to buy parts that you do not need because you know exactly what is wrong with your vehicle.To know if you are ready for a smog check, press I/M button for 3 seconds.

User-friendly Design

Hand-held size, clearly arranged keypad, menu-driven navigation, hotkeys and 2.8'' color screen together make the engine tool extremely easy to use.

What live data can be read by this device?

How much data can be read depends on the vehicle, there are over 40 graphing live data (Download the Specification Sheet to get a whole list), to list some: FUELSYS(fuel system status), LOAD_PCT(Calculated load value),ECT(Engine Coolant Temperature), SHRTFT(Short term fuel trim-bank), LONGFT(Long term fuel trim-bank), Engine RPM, VSS(Vehicle Speed Sensor), SPARKADV(Ignition timing advance for cylinder 1), IAT(Intake air temperature), MAF(Mass Air Flow), TP(Absolute Throttle Position), O2SLOC(Location of Oxygen Sensors), O2B1S2(Oxygen sensor output voltage (B1-S2), SHRTFT(Short term fuel trim), OBDSUP(OBD requirements), MIL_DIST( Distance traveled while MIL activated), EQ_RATB1S1(Equivalence Ratio Bank 1, Sensor1), O2B1S1(Oxygen sensor output voltage), EVAP_PCT(Commanded Evaporative Purge), etc.

NT301 Suppport Car list:

-1996 or newer model year vehicle sold in the United States

Fit for Chrysler

Fit for Ford

Fit for GM

Fit for Jeep

-2001 or newer model year vehicle sold in the European Union

Fit for Alfa	Fit for Romeo	Fit for SAAB	Fit for Opel	Fit for Audi
Fit for Seat	Fit for Peugeot	Fit for Renault after 2009	Fit for Skoda	Fit for Daewoo
Fit for Benz	Fit for Daihatsu	Fit for Land Rover	Fit for BMW	Fit for Vauxhall
Fit for Citroen	Fit for Volvo	Fit for Fiat	Fit for Ford	Fit for Jaguar

-2008 or newer model year vehicle sold in the Asian Union

Fit for KIA	Fit for Isuzu	Fit for Honda	Fit for Mitsubishi	Fit for Hyundai
Fit for Dacia	Fit for Lexus	Fit for Mazda	Fit for Nissan	Fit for Subaru
Fit for Suzuki	Fit for Toyota

✔ Specifications:
- Brand: FOXWELL
- Model: NT301
- Fitment: for all OBDII compliant cars
- Color: black + orange
- Display: 2.8" TFT color screen
- OSD Language: English, Spanish, French, German, Polish, Portuguese, Hungarian, Dutch, Italy and Swedish
- Power: 8-18 Volts powered by vehicle battery
- Working Temperature: 0° to 60°
- Storage Temperature: -20° to 70°
- Product Dimension: 14.5 * 9.4 * 3.2cm / 5.7 * 3.7 * 1.3in
- Package Size: 26 * 18 * 5cm / 10 * 7 * 2in

- Package Weight: 490g / 17oz

✔ How to update NT301 obd2 diagnostic code reader? (Not Necessary before utilization. )
1. Visit FOXWELL website foxwelltech.com and then visit the Product page of NT301，select the Download tab to download the update application NTWonder.
2. Enable NTWonder and connect NT301 to computer with USB cable in the package.
3. Click "Update online" or "Update offline" to start downloading and installing the latest version to your tool.
Can only be updated on Windows system. No need for registration!
4. An Update Finished Message displays when the update is completed.

☒Package included:

- 1 * OBDII Code Reader

- 1 * English User Manual

- 1 * USB Cable

Payment Delivery details Terms of sales About us Contact us

Payment

We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect.

Please contact us if you need to use another method to pay.

Payment should be made within 7 days after bidding ends.

Otherwise a Unpaid Item case will be opened to you.

We are not responsible for buyers’ local taxes.

Please include your special requests in eBay note if there is any.

Delivery details

Order will be shipped within 1 business day after payment confirmed.

We have warehouse in USA, From our US warehouse via UPS or USPS shipping.
Delivery time varies from 2 to 5 business days.

We will ship according to your eBay address.
Please make sure it is correct and include phone number for delivery.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.

Terms of sales

Return Policy

Please return the item within 60 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.

We are authorize distributor, our all items are 100% original and Our devices have warranty,
5 Year free repair for the devices.

Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us as soon as possible and keep it unused.

We will instruct you on how to return and get refund or replacement.

If the item has been used, we have the right to decline your claim.

Items should be returned on buyers' cost for repair or replacement.

About us

Who We Are?

We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics

for more than 10 years.

We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands,

and more brands will be show in our store in near future.

What Do We Have?

We have office and warehouse in US to ensure fast shipment and after-sale service.

We have more than 100 employees devoting to customer satisfaction.

1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.

2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)

3:Please leave us Positive Feedback and 5-stars ★★★★★ after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.

Store category

You may also like

Product Description

✔ FOXWELL NT301 OBD2 SCANNER