This is a top-of-the-line horn driver designed to offer unsurpassed natural upper midrange and high frequency response at high sensitivity, with crystal clear natural sound from the Polyimide diaphragm.
The driver’s small diameter allows front mounting, making it easy to install without detaching the driver from the WGP14-50X Horn.
Its design was developed to give custom doors a new solution for a shallow horn driver, its 2.0” voice coil allows it to push more power into it, increasing its output tremendously because of its low mass diaphragm.
The specially designed Polyimide diaphragm provides durability and additional damping for natural sound quality. This technology raises the bar for high frequency drivers by giving the driver wider usable bandwidth for smooth, dynamic output along with excellent efficiency.
The Polyimide diaphragms supersede titanium diaphragms, being able to play low frequencies without shattering and performing more accurately at high frequencies.
Exit Throat Diameter | 2” (50 mm) |
Nominal impedance | 8 Ohm |
Nominal Power Handling | 75 Watts |
Continuous Program Power (RMS)** | 150 Watts |
Peak Power | 300 Watts |
Sensitivity 2.83V at 1m | 107 dB |
Recommended Hi Pass Crossover For Full Power Handling | 1000 Hz 12db Per Octave Crossover |
Frequency Response at -10dB | 1000 – 17,000 Hz |
Voice Coil Diameter | 2”(51 mm) |
Voice Coil Wire | CCAW |
Voice Coil Former Material | Kapton |
Diaphragm Material | Polyimide |
Flux Density | 2.10 T |
Magnet Material | Ferrite |
Overall Depth | 5.87” (149 mm) |
Mounting Depth | 5.55” (141 mm) |
Overall Width | 6.14″ (156 mm) |
Overall Height | 6.14″ (156 mm) |
Baffle Cutout | 5.75″(146 mm) |
Net Weight | 6.45 lbs (2.94 kg) |
Shipping Weight | 7.05 lbs (3.20 kg) |
Carton Dimensions W x L x H | 6.89” x 6.89” x 7.48” (175x 175 x 190mm) |