Specification:

Wheel bolt pattern: 5x4.5                                    

Vehicle bolt pattern：5x4.5

Thread Size：12x1.5                                                

Spacer Thickness:1"

Color：silver                                                         

Package include:

4 x Wheel Spacers Adapters

Compatibility:

For ACURA:
For ACURA CL 2001-2003
For ACURA ILX 2013-2018
For ACURA Legend 1991-1995
For ACURA MDX 2001-2006
For ACURA NSX 1991-2005
For ACURA RDX 2007-2013
For ACURA RL 1996-2004
For ACURA RSX 2002-2006
For ACURA TL 1996-2008
For ACURA TSX 2004-2013

For HONDA:
For HONDA Accord 1998-2018
For HONDA Accord Crosstour 2010-2011
For HONDA CR-V 1997-2013
For HONDA CR-Z 2011-2016
For HONDA Civic 2004-2017
For HONDA Element 2003-2011
For HONDA Fit ELECTRIC 2013
For HONDA Pilot 2003-2008
For HONDA S2000 2000-2009

For TOYOTA:
For TOYOTA Avalon 1995-2013
For TOYOTA Camry 1992-2017
For TOYOTA Highlander 2001-2013
For TOYOTA Matrix 2009-2013
For TOYOTA Pickup 1980-1995
For TOYOTA RAV4 1996-2018
For TOYOTA RAV4 ELECTRIC 1998-2003&2012-2014
For TOYOTA Supra 1986-1998
For TOYOTA Tacoma 1995-2013
For TOYOTA Venza 2009-2012&2014-2016 

READ BEFORE ACTION

STEP-1Vehicle bolt pattern check

Confirm your vehicle bolt pattern according to the figure below.

Let's take the 5-lug wheel spacer as an example, if the length of segment as measured in the picture is 5.5”, and as there are 5 lugs, then the bolt pattern is 5x5.5". Now you should be able to determine what kind of bolt patterns you need.

STEP-2 Measurement

Measure the diameter of the center bore of the wheel spacers, make sure that it is greater than the axle diameter.

STEP-3 Check

Check the thread size, which is often ignored by customers when placing the order.
TIPS: install the supplied lug nuts or bolts on the hub only by hand (do not install the wheel at this time). It might be the wrong thread size for your vehicle when you feel resistance during the process, and please con:act the tire seller or manufacturer for further suggestions.

Installation NOTICE:

1. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
2. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers.
3. Install the nuts by hand ONLY and tighten them in a crisscross pattern.
4. Do NOT use automatic screwdrivers when installing wheel spacers.
5. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can、work as normal and will -r-atlv shorten the bolt's workinq life and bring danger to you.

Maintenance TIPS

• Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000 - 5000 miles and screw tight.
• For any further questions, please contact the manufacturer or seller via message of website v/here you placed the order. Thank you again for purchasing your wheel spacers with us.