Feature:

1. Alarm : Non contact level controller with 4 non contact level detecting heads realize the liquid level high and low control function, when the liquid level of the container is too low trigger the low level alarm from the low level sensor.
2. Automatic Stop: When the liquid level reaches a certain height, the high level sensor will send a to trigger the controller to automatically stop the pump work. Keeps the liquid level of the container stable.
3. 4 Sensors: Liquid level controller with 4 sensors with water inlet detection and water overflow detection, all round protection and control of the water level line of the tank or water tower.
4. Manual and Automatic Control: Diversified control of the level sensor allows control of the pump in manual or automatic mode.
5. Sensor Line Length: The non contact level controller has a sensor line length of three meters, which can be applied to more scenarios, such as factories and laboratories.

Specification:

Item Type: Non Contact Level Controller
Function: Automatic Water Level Control, Water Inlet Detection, Water Overflow Detection
Material: ABS
Input Voltage: AC220V, 50Hz
Working Current: ≤7A
Power Consumption: ≤ 2W
Sensor: Non Contact Liquid Level Sensor
Load Power:
Maximum Power 1600W When The Supply Voltage Is 220V
If You Need To Control The Load Beyond This Limit Parameter, Please Install An Intermediate Relay(Not Including)
Alarm Output: 800-1600W (Resistive Load)
Output Mode: Relay Normally Open Contact
Sensor Interface Voltage: DC12V
Working Environment Temperature: -20-105℃, Relative Humidity ≤ 80%
Installation Method: Screw Wall Mounting
Size: Approx. 115 x 115 x 40mm / 4.5 x 1.6in

Package List:

1 x Liquid Level Sensor Controller

1 x Screwdriver

4 x Screw

4 x Tie