• Condition: 100% new
• Compounds Color:White, Green, Brown, Black, Red, Yellow, Blue
• Material: Water-soluble,Compounds,Paper,Cloth,Faux Leather,Plastic,Metal,Wood
• Compounds Capacity: 7 x 5ml
• Item included:

  7 x Heat Cure Compounds

  1 x Heat Transfer Tool

  3 x Grain Paper

  1 x Backing Fabric

  1 x Faux Leather Piece

  1 x Mixture Cup

  1 x Spatula

  1 x Instruction Manual

• Suitable for: leather seat, leather coat, sofa etc.

  This Is Aftermarket Replacement Item But Not Genuine

• Note:

  1) All dimensions are measured by hand, there may be small deviations.

  2) Color may vary slightly due to the color setting of each individual monitor.

Product Dimension:

Feature:

1) Permanently and perfectly repaired leather breakage.

2) Easy to operate, follow the guide one step by step.

3) Can match all the colors.

4) The repair process does not need to be migrated.

5) Saves the cost,apply to repair real leather, synthetic PU leather, cloth repair is soft.

6) Can repair any leather and fabric cracks, split, burn and tear.

Instruction:

1) Clean the repair area, cut off excess thread or burnt leather, to ensure that the repair area of the front cover is clean and dry.

2) repair tear damage, glue can be directly used. For the repair of damage greater than 5 mm, you need to use a pair of scissors to cut a piece of cloth that is slightly larger than the damage. Use a stirring rod to insert the cloth under the broken leather to support the repair.

3) Select the texture paper closest to the damaged leather from the provided texture paper, and sketch the shape of the damaged area in the middle of the texture paper. This will help you to determine the operating position of the thermal bar in the seventh operation.

4) For a car dashboard damage that will be more deeply repaired, you need to glue the water to the same height as the leather. Glue curing a little contraction, shrink space for filling paint.

5) Referring to the color matching chart, mix the color with a mixing rod, apply a small amount of the mixed color to the undamaged area to determine if the color is close, and then wipe the color until the color closest to the leather is slowly modulated.

6) When the glue is fully cured, carefully apply the color to the area where glue shrinks and wipe the excess paint around the damaged area. Do not paint too much once applied, if necessary, you can add more paint.

7) Place the textured paper side of the texture paper on the leather, make sure the damaged area is in the correct position before moving it. If the repair is on a vertical plane, secure the texture paper with something.

8) Place the thermal bar on the hot iron for 4 minutes, then place the thermal bar metal sheet over the damaged area of the textured paper and move the thermal bar clockwise for 1 minute in this area. Then continue to heat the stick on the iron heating, it seems that the operation 5-10 times, until the pigment curing, slowly remove the texture paper, repair is complete.