The 335 MKII is an updated version of our classic 335 bag
and sits in the middle of our 5-Series MKII range for size. As such
it perfect for carrying 2 DSLR or mirrorless cameras with small to medium
lenses attached or 1 camera with a selection of lenses. This camera bag
has a total of 10 pockets, including a full length front pocket that can
hold a 14” laptop, tablet or accessories. Made in England with 3-layer
waterproof fabric and real leather.
MULTIPLE LAYOUT OPTIONS INSIDE
Included with the bag are several dividers that can be repositioned or removed to provide different options for arranging your equipment.
Organisation can be further enhanced with the 20+ different
divider sizes/styles available to customise the bag to your equipment and
preferred layout:
Please note:
MAIN COMPARTMENT AND TUKTOP FEATURE
Experience comprehensive protection with padding on all four
sides and the base of the main compartment, safeguarding your valuable
equipment. The front and back walls each have two strips of Velcro® so that you
can attach the padded dividers previously mentioned.
Behind the padded walls at the front and back is a slim
space, made of 2 pockets each (4 in total). Ideal for manuals, lens filters,
etc.
The zips can also be tucked into this space to keep them out
of your way during use. We call this the ‘TukTop’ feature. You can still store
slim gear in the space while using the TukTop feature.
All the features mentioned here are improvements over some
previous versions of the bag adding convenience as well as protection for your
equipment.
FRONT DUMP POCKETS
On the front face of the bag are two generously sized dump
pockets. These are perfect for film, cables, batteries, spare memory cards etc
- helping you keep your bag organised whilst easing access when you need it
most.
Adjacent to each dump pocket is a small pen pocket, adding
to the 335 MKII's organizational features.
The secondary flap shown protects these pockets from dust,
weather and unwanted fingers. It closes with its own dedicated leather ‘Quick
Release Straps’ – just lift them up-and-off the brass clogball to access the
pockets.
FULL WIDTH FRONT ZIP POCKET
The 335 MKII has a full-length front zip pocket with enough space for a 14” MacBook Pro in a slim case
Please note:
- This pocket is padded on one side only.
- The discontinued Billingham 13” Laptop Slip is a little too big to
fit in this pocket (the leather edging on that product increases the dimensions
too much).
FULL WIDTH FRONT ZIP POCKET (CONTINUED)
Within the previously mentioned full-length zip pocket,
you'll find two padded pockets, perfectly suited for small lenses, compact
flashes, or lavalier microphones.
Please note: Carrying a laptop in the front zip pocket
may restrict the capacity of these two padded pockets.
ZIPPED REAR POCKET & LUGGAGE TROLLEY STRAP
The bag's rear is equipped with a zipped pocket, perfect for
securely storing maps, tickets, and other essentials.
A new addition to the MKII version is the luggage trolley
retainer strap, designed to conveniently slide over the handle of a trolley
suitcase, a major convenience during travel.
BRASS FEET
Each bag in our '5 Series MKII' lineup (225 MKII, 335
MKII, 445 MKII, and 555
MKII) is equipped with durable brass feet, securely mounted on robust leather
corner patches. This design not only protects the bag's corners from wear but
also extends the overall longevity of the product.
While we are discussing the other '5 Series MKII’ bags –
they are all identical to each other in design, varying only in size and the
number of dividers included. The 225 MKII is the smallest and 555 MKII is the
biggest.
LEATHER GRAB HANDLE
For utmost comfort, the bag features a leather grab handle
that wraps around its strong webbing carry straps.
Additionally, the bag includes an extra internal webbing
strap sewn in at the back under the top flap. Used in conjunction with the
front handle, to which the grab handle is attached, this feature enables safe
carrying of the bag even when it's open.
DELTA SLING AND OPTIONAL DELTA POCKETS
The shoulder sling of the 335 MKII is made of strong
shuttle-woven polyester with a brass fixing to allow you to adjust the length
to suit your height and shooting style.
Where the sling attaches to the bag, it splits into an
inverted 'Y' shape at each end. This distinctive split design enhances weight
distribution, ensuring the bag remains stable and level, even when carrying
heavy loads.
Further, the lower ends of this split sling act as
attachment points where optional Delta Pockets can be clipped
on, offering added space and organization as needed. The image provided
showcases the back of one such Delta Pocket.
QUICK RELEASE STRAPS (AND HOW TO ATTACH A TRIPOD)
The Quick Release System to open the top flap has been
adapted so that the top grain leather straps pass through solid brass ‘D’ rings
at the end of the webbing carry handles.
The bag was designed this way to provide fast, secure
closure even when the bag is heavily loaded – the strong webbing and brass
D-rings carry the weight.
At the bottom of the bag (front and back) are fixings for
optional Tripod Straps. Additionally, some people just thread
tripods through the webbing of the top handle of the bag (what will work for
you depends on the design of your tripod).
COMPARISON TO ORIGINAL 335
Compared to the most recent version of the 335, the
335 MKII offers several upgrades:
Additionally, it retains improvements that were gradually
added to the 335 (and its predecessors) over the years such as the SuperFlex
divider system, two strips of Velcro on the front and back of the main
compartment to more securely attach dividers, a StormBlock butyl rubber lining
for improved waterproofing, the 'TukTop' feature to tuck the zips of the main
compartment out of the way during use and a significantly more robust
'closed-cell' foam padding.
Bonus notes:
- The picture is of the SP20 shoulder pad that is
included with the bag.
- The main compartment in this bag and the 307 bags are nearly
identical in size, indeed they use the same removable padded basepad.
- See the FAQs for a comparison to the 307, 225 MKII and 445 MKII bags.
FINALLY...
Specification & Sizing
THE BAG
External dimensions
W370mm (14½) x D220mm (8⅝") x H265mm (10½")
Internal dimensions
W355mm (14") x D150mm (6") x H220mm (8⅝")
The 'D' measurement is flexible up to about 170mm (6¾”).
Capacity (Main Compartment Only)
10 litres (0.35 feet³)
Weight
1.98kg (4.36 lbs)
POCKETS
10 in addition to the main compartment.
FRONT EXTERNAL DUMP POCKETS (X2)
Internal dimensions
W130mm (5⅛") x D40mm (1½") x H200mm (7⅞")
Capacity (Individual)
0.75 litres (0.03 feet³)
FRONT FULL LENGTH ZIP POCKET
Internal dimensions
W350mm (13¾") x D40mm (1½") x H250mm (9⅞")
You can carry a laptop, up to 13", in this
compartment. Smaller 14" devices such as the MacBook Pro will also
fit. However, you may wish to add a slim padded sleeve to protect the device in
this position - on a 14" device especially you'll need to make sure that
the case does not add much length or width.
Capacity
4 litres (0.14 feet³)
FRONT INTERNAL DUMP POCKETS INSIDE FRONT ZIPPED POCKET (X2)
Internal dimensions
W170mm (6¾") x D30mm (1¼") x H170mm (6¾")
These pockets are padded and some customers use them to
store small lenses or flashes - however that may limit your ability to carry a
computing device in the wider full length pocket.
Capacity (Individual)
Nominal
FRONT AND REAR INTERNAL POCKETS IN MAIN COMPARTMENT (2 + 2)
Internal dimensions (individual)
W160mm (6¼") x D Nominal x H240mm (9½")
Capacity (Individual)
Nominal
REAR ZIP POCKET
Internal dimensions
W330mm (13") x D Nominal x H220mm (8⅝")
Capacity
Nominal
SHOULDER SLING
Length
Can be adjusted between 1050mm (41⅜") to 1500mm
(59") approx.
Width
50mm (2")
Compatible with SP20 and SP50 Shoulder
Pads. The SP20 Shoulder Pad is included when you purchase the 335 MKII.
SP20 SHOULDER PAD (INCLUDED)
External dimensions
W71mm (2¾") x D5mm (¼") x L227mm (9")
'D' measurement excludes fixings on top.
Weight
0.08kg approx (0.18 lbs)
LUGGAGE TROLLEY RETAINER STRAP
Luggage trolley strap retainer will fit handles
approximately 265mm (10⅜) wide - however if the top of the handle is slightly
larger than this fitting will usually still be possible.