An updated version of our classic 445 bag and the
second-from-largest in our 5-Series MKII range. A large camera bag that is
perfect to carry 2 DSLR or full-frame mirrorless cameras with small to medium
lenses attached or 1 camera with a selection of lenses. This camera bag has a
total of 10 pockets, including a full length front pocket that can hold a 16”
MacBook, tablet or accessories. Made in England with 3-layer waterproof fabric
and real leather.
MULTIPLE LAYOUT OPTIONS INSIDE
As one of our largest camera bags (only the 555 MKII and 550
are bigger), and with several dividers included that can be repositioned or
removed, the 445 MKII has numerous options for laying out your equipment.
Organisation can be further enhanced with the 20+ different
divider sizes/styles available separately to customise the bag to your camera
gear and preferred layout:
SuperFlex Partitions (two already included, different sizes
can be purchased separately)
SuperFlex Flap (one is already included)
DF Dividers
V-Bridge 15 (one is already included)
Please note:
- The SuperFlex Partitions shown in the photo are not the
‘SuperFlex 9-15’ and ‘SuperFlex 10-18’ sizes that are included with the bag,
although they are very similar.
- Pro-tip: The 'DF 15-15' divider reaches front-to-back
inside the main compartment of this bag, making it particularly good for some
set-ups (e.g. placing two cameras next to each other in the bag).
- SuperFlex Partitions are flexible so fit items slightly
wider than their dimensions suggest.
MAIN COMPARTMENT AND TUKTOP FEATURE
To protect your valuable equipment, we have included padding
on all four sides of the main compartment, as well as supplying a deeply padded
basepad. The front and back walls each have two strips of Velcro® so that you
can attach the padded dividers mentioned previously.
Behind the fabric covered padded walls at the front and back
is a slim space, consisting of 2 pockets each (4 in total). Ideal for manuals,
lens filters, etc.
The zips can also be tucked into this space to keep them out
of your way while you use the bag. We call this the ‘TukTop’ feature. You can
still store slim gear in the 4 slim pockets while using the TukTop feature.
All the features mentioned here are improvements over some
previous versions of the bag, adding convenience as well as protection for your
equipment.
FRONT DUMP POCKETS
On the front face of the bag are two generously sized dump
pockets. These are perfect for film rolls, cables, batteries, memory cards etc
- helping you keep your bag organised whilst allowing speedy access when you
need it most.
To further assist in organisation, adjacent to each dump
pocket is a small pocket to store pens.
The secondary flap shown protects these front pockets from
dust, weather and unwanted fingers. The flap closes with its own dedicated leather
‘Quick Release Straps’ – just lift them up-and-off the brass clogball to access
the pockets.
FULL LENGTH FRONT POCKET
The 445 MKII has a full-length front zip pocket with enough
space for a 16” MacBook Pro or similar sized laptop in a slim slipcase.
Please note:
This pocket is padded on one side only.
The old Billingham 13” Laptop Slip will fit (but our
discontinued 15” Laptop Slip is a little too big due to the leather trim on
that item).
FULL LENGTH FRONT POCKET
The 445 MKII has a full-length front zip pocket with enough
space for a 16” MacBook Pro or similar sized laptop in a slim slipcase.
Please note:
This pocket is padded on one side only.
The old Billingham 13” Laptop Slip will fit (but our
discontinued 15” Laptop Slip is a little too big due to the leather trim on
that item).
REAR ZIP POCKET
On the back of the bag is a zipped pocket, for securely
storing maps, tickets, and other essentials.
A new addition to the MKII version is the luggage trolley
retainer strap, designed to conveniently slide over the handle of a trolley
suitcase, a major convenience during travel.
Please note:
Given the large size of the bag user discretion is advised
when fitting it to a suitcase. Trolley suitcases that are narrower than the bag
or that have particularly narrow handles might not be a stable fit. Of course,
even if your suitcase isn’t a good fit, you’ll still be able to carry the bag
on your shoulder using the included leather shoulder pad or carry it by hand
with the comfort of the leather top handle.
BRASS FEET
Each bag in our '5 Series MKII' lineup (225 MKII, 335 MKII,
445 MKII, and 555 MKII) is equipped with durable brass feet, securely mounted
on robust leather corner patches. This design not only protects the bag's
corners from wear but also extends the overall longevity of the product.
LEATHER GRAB HANDLE
For comfort while carrying, the 445 MKII features a leather
grab handle that wraps around its strong webbing carry straps.
Additionally, the bag
includes an extra internal webbing strap sewn in at the back under the top
flap. Used in conjunction with the front handle, to which the grab handle is
attached, this feature enables safe carrying of the bag even when it's open.
DELTA SLING AND OPTIONAL DELTA POCKETS
The shoulder sling of the 445 MKII is made of strong
shuttle-woven polyester with a brass fixing to allow you to adjust the length
to suit your height and shooting style.
Where the sling
attaches to the bag, it splits into an inverted 'Y' shape at each end. This
distinctive split design enhances weight distribution, ensuring the bag remains
stable and level, even when carrying heavy loads.
Additionally, the lower ends of this split sling act as
attachment points where optional Delta Pockets can be clipped on, offering
added space and organization as needed. The image provided showcases the back
of one such Delta Pocket.
QUICK RELEASE STRAPS (AND HOW TO ATTACH A TRIPOD)
The Quick Release System to open the top flap has been
adapted so that the top grain leather straps pass through solid brass ‘D’ rings
at the end of the webbing carry handles.
The bag was designed this way to provide fast, secure
closure even when the bag is heavily loaded – the strong webbing and brass
D-rings carry the weight.
At the bottom of the bag (front and back) are fixings for
optional Tripod Straps. Additionally, some people just thread tripods through
the webbing of the top handle of the bag (what will work for you depends on the
design of your tripod).
COMPARISON TO ORIGINAL 445
Compared to the most recent version of the 445, the 445 MKII
offers several upgrades:
A luggage trolley
strap on the back, the old version did not have this.
A V-Bridge 15, useful for lens support in certain
configurations, is now included inside the bag. Previously it was only sold
separately.
Furthermore, it
retains improvements that were gradually added to the 445 (and its
predecessors) over the years such as the SuperFlex divider system, two strips
of Velcro on the front and back of the main compartment to more securely attach
dividers, a StormBlock butyl rubber lining for improved waterproofing, the
'TukTop' feature to tuck the zips of the main compartment out of the way during
use and a significantly more robust 'closed-cell' foam padding.
Bonus notes:
- The picture is of the SP20 shoulder pad that is included
with the bag.
- See the FAQs for a comparison to the 335 MKII and 555 MKII
bags.
FINALLY...
Remember, like all current Billingham camera bags the 445
MKII features:
3-layer waterproof fabric.
The 445 MKII is made from a choice of Canvas or FibreNyte
materials that are bonded to a polyester lining with a layer of butyl rubber,
known as the 'StormBlock'. This butyl layer is the reason why you will never
need to re-proof your Billingham bag, the 'Stormblock' layer will keep your bag
waterproof for its lifetime.
Real, top-grain, organic, vegetable tanned cowhide.
Solid brass fixings.
Individual serial number featured on each bag to track
quality and ensure authenticity.
5-year manufacturers guarantee.
Handmade at our factory in England, this bag offers the
quality you'd expect from Billingham
Specification & Sizing
THE BAG
External dimensions
W430mm (17") x D250mm (9⅞") x H300mm (12⅝")
Internal dimensions
W400mm (15¾") x D150mm (5⅞") x H250mm (9⅞")
The 'D' measurement is flexible up to about 170mm (6¾”).
Capacity (Main Compartment Only)
14 litres (0.50 feet³)
Weight
2.32kg (5.11 lbs)
POCKETS
10 in addition to the
main compartment.
FRONT EXTERNAL DUMP
POCKETS (X2)
Internal dimensions (individual)
W160mm (6¼") x D50mm (2") x H250mm (9⅞")
Capacity (individual)
01.25 litres (0.04 feet³)
FRONT FULL LENGTH
ZIPPED POCKET
Internal dimensions
W390mm (15⅜") x D40mm (1½") x H290mm (11½")
Some people carry a laptop such as MacBook Pro (up to
16") in this compartment. However, you may wish to add a slim padded
sleeve to protect the device in this position.
Capacity
5 litres (0.18 feet³)
FRONT INTERNAL DUMP
POCKETS INSIDE FRONT ZIPPED POCKET (X2)
Internal dimensions
W190mm (7½") x D30mm (1¼") x H220mm (8⅝")
These pockets are padded and some customers use them to
store small lenses or flashes - however that may limit your ability to carry a
computing device in the wider full length pocket.
Capacity (Individual)
Nominal
FRONT AND REAR INTERNAL POCKETS IN MAIN COMPARTMENT (2 + 2)
Internal dimensions (individual)
W180mm (7⅛") x D Nominal x H280mm (11")
Capacity (individual)
Nominal
REAR ZIP POCKET
Internal dimensions
W380mm (15") x D Nominal x H240mm (9½”)
Capacity
Nominal
SHOULDER SLING
Length
Can be adjusted between 1050mm (41⅜") to 1500mm
(59") approx.
Width
50mm (2")
Compatible with SP20 and SP50 Shoulder Pads. The SP20
Shoulder Pad is included when you purchase the 445 MKII.
SP20 SHOULDER PAD (INCLUDED)
External dimensions
W71mm (2¾") x D5mm (¼") x L227mm (9")
'D' measurement excludes fixings on top.
Weight
0.08kg approx (0.18 lbs)
LUGGAGE TROLLEY RETAINER STRAP
Luggage trolley strap retainer will fit handles
approximately 270mm (10⅝) wide - however if the top of the handle is slightly
larger than this fitting will usually still be possible.