Function introduction:

Time delay range: T1 and T2 between 0.1 seconds to 99 hours adjustable

P1(Delay turn off): When power on, the relay on, delay T1, and the relay off. Give IN a low level, repeat the above function.

P2(Delay turn on): When power on, the relay disconnected, delay T1, and the relay on. Give IN a low level, repeat the above function.

P3(Time cycle on-off): When power on, the relay on, delay T1, and the relay off, Delay T2, the relay on,and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.

P4(Timing cycle off-on): When power on, the relay disconnected, delay T1, and the relay on, delay T2, the relay off, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.

P5(trigger delay turn off): When power on, the relay disconnected, trigger the relay on, delay T1, and the relay on.Give IN a low level, repeat the above function

P6(trigger delay turn on): When power on, the relay disconnected, trigger the relay disconnected, delay T1, and the relay on.Give IN a low level, repeat  the above function

P7(trigger cycle on-off): When power on, the relay disconnected, trigger the relay on, delay T1, and the relay off. Delay T2, and the relay on, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.

P8(trigger cycle off-on): When power on, the relay disconnected, trigger the relay disconnected, delay T1, and the relay on. Delay T2, and the relay off, and then repeat the above condition, cycle times can be adjusted 1-99 times or infinite loop.

Feature parameters:

Working voltage: DC 5V / 12V / 24V

Load Power: DC 0-30V 10A / AC 0-220V 10A

Static current:15mA

Working current:30mA

Service life: 100 thousand times;

Working temperatures: -40-85℃

Size: 65*8*18mm

Package included: 1 pcs

Use operation instructions:

Step 1: power on.

Step 2: long press the SET key to enter the function to choose,display P1-P8,Short press SET key, switch between function P1 to function P8

Step 3: press the ADD key to select the T1 time unit, the display value(-0/-1/-2/-3),set the T1 time unit,the press the ADD key time unit to switch between -0/-1/-2/-3.

Time unit: -0: time range 0.1s to 9.9s.(time accuracy: 0.1s)

Time unit: -1: 1s to 99s.(time accuracy: 1s )

Time unit: -2: 1min to 99min.(time accuracy: 1min )

Time unit: -3: 1h to 99h.(time accuracy: 1h )

Step 4: long press the SET key to set T1 time,display T1, then press ADD/Enter key to add and subtract time,display value(00).

If it is a function of P1,P2,P5 And P6, press SET key to confirm the save, set the end.

If it is a function of P3,P4,P7,P8, to enter the step 5

Step 5: press the SET key to select the T2 time unit, the display value(-0/-1/-2/-3), set the T2 time unit, then press the ADD key time unit to switch between -0/-1/-2/-3.

Time unit: -0: time range 0.1s to 9.9s.(time accuracy: 0.1s)

Time unit: -1: 1s to 99s.(time accuracy: 1s )

Time unit: -2: 1min to 99min.(time accuracy: 1min )

Time unit: -3: 1h to 99h.(time accuracy: 1h )

Step 6: press the SET key to set T2 time,display T2, then press ADD/Enter key to add and subtract time,display value(00).

Step 7: press the SET key to set cycle times, display “C-”, then press ADD/Enter button to add and subtract the times of cycle, display value(00), if set to 0 is infinite loop.

Step 8: press the SET key to confirm the preservation