Payment Policy Shipping Policy Return Policy FAQ About Us |
4PC Front Complete Strut Spring Sway Bar Kit For Chevy Trailblazer Buick Rainier
Application:
| Make |
Model |
Year Range |
Specific Details |
| Buick |
Rainier |
2004 - 2007 |
All Models |
| Chevrolet |
Trailblazer |
2004 - 2007 |
Excluding Ss Models |
| Chevrolet |
Trailblazer Ext |
2004 - 2006 |
All Models |
| GMC |
Envoy |
2004 - 2007 |
All Models |
| GMC |
Envoy Xl |
2004 |
All Models |
| Isuzu |
Ascender |
2004 - 2008 |
All Models |
| Oldsmobile |
Bravada |
2004 |
All Models |
| Saab |
9-7X |
2005 - 2009 |
All Models |
Description:
【Quality】100% brand new,Strictly produced according to the standard and the quality and stability of the product are better.
【Easy To Install】Ensure precise fit and quickly replace compete strut.
【Recover Performance】 Replacing our struts assembly, shorten the braking distance, and increase the safety distance,improve steering response, reduce stopping distance and give you more confidence in driving.
【Increase Tire Grip】By increasing the spring stiffness coefficient, the rapid vibration of the wheel is suppressed, the tire is prevented from leaving the road, and the exercise stability is improved.
【Bounce Reduction】 Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy.
【Vehicle Compatibility】Please check the description and compatibility chart before your purchasing， if you have any question regarding our this product.
Highlights：
- Anti-corrosion and provide a more consistent wear surface
- Built to strict quality control standards, quality upgrade!
- CNC Machined Components
- Easy to install
- Eliminating abnormal sound
- Gives the driver more control of ride
- Good heat dissipation
- It has a high compressive strength and good sound insulation to ensure our driving comfort and safety
- Restore the original ride height and improve ride quality
- Test more than 3 million times
- Sturdy & Durable Material
- Direct fit , no special tools requir.
- Fast Shipping. Warehouses in the East, West and south.
- Professional for you to answer the very common problems of air suspension; Welcome to collect money after sale consultation!
If you are experiencing the following, it may be time to replace your struts:
- Abnormal sounds coming from your vehicle.
- Excessive bouncing while driving.
- Poor braking performance.
- Premature tire wear.
- Stiff or sluggish steering.
- Poor stability.
Note Before Installation:
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
How to Install :
- Step 1: Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.
- Step 2: Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.
- Step 3: (Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.
- Step 4: Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.
- Step 5: (Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).
- Step 6: Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.
- Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.
- Step 7: Remove Sway bar Attached to the Strut Assembly or Control Arm.
- Step 8: Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).
- Step 9: Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.
- Step 10: Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.
- Step 11: Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.
- Step 12: Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.
- Step 13: Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.
- Step 14: Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.
- Step 15: Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.
- Step 16: It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or Potholes.
Precautions for replacing the shock absorber:
- 1. When installing a new shock absorber, you should pay attention to whether the model matches, please pay attention to the matching model list before purchasing, and confirm whether the left and right are correct.
- 2. Check the quality status of the new shock absorber, such as whether there is oil leakage in the appearance, etc., pay special attention to the surface of the piston not to be bumped.
- 3. Professional tools must be used during installation, and the shock absorber must not be forcibly installed.
- 4. Pay attention to whether the installation position between the shock absorber and the body and the car is correct.
- 5. During the assembly process, be sure to protect the surface of the piston rod, and avoid using tools to pull the piston rod or bump or scratch the piston rod, otherwise the shock absorber will leak oil.
- 6. All nuts should be new and tightened according to the specified parameters of the vehicle to ensure that the tightening torque of the connection part meets the specified parameters of the vehicle.
- 7. When tightening the nuts of the connecting part, it should be carried out in the natural state of the tire and meet the specified parameters of the vehicle.
Package Included:
- 2x Front Driver or Passenger Side Complete Strut & Spring Assembly - 171341
- 1x Front Stabilizer Sway Bar End Link (Driver) - K80824
- 1x Front Stabilizer Sway Bar End Link (Passenger) - K80825
We'll ship the struts separately in two pakages if the full set is over weight. Notice please!
Notice:
-Please double confirm the compatibility as well as the OEM number before purchasing.
-Instruction is not included. Professional installation is recommended.
-Please feel free to contact us for whatever we can help via eBay message; every message will be replied in 12 hours
| Item Specifics |
|---|
| Brand : | Aceparts | | Manufacturer Part Number : | A820150PT01 | | Manufacturer Warranty : | 1 Year | | Fitment Type : | Direct Replacement | | Placement on Vehicle : | Front | | Adjustable : | No | | Custom Bundle : | Yes | | Items Included : | Complete Struts ,Stabilizer Bar Link | | Finish : | Polished, Rust Protected | | Part Type : | Strut & Coil Spring Assembly | | Greasable or Sealed : | Sealed | | Modified Item : | No | | Gas Charged Shock : | Yes | | Compression Range (in.) : | 11.070 | | Extended Length (in.) : | 16.080 | | Interchange Part Number : | 171341,K80824 | | OE/OEM Part Number : | K80825 | | Express : | Split shipment | | Type : | Strut & Spring Assembly | | Shock Absorber Type : | Gas | | Shock Absorber System : | Double Pipe |
· PayPal preferred.You can open a Paypal account at www.paypal.com
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
· 20% restocking fee will be applied if returned item is not in brand new condition.
①no information what is wrong with item
③ wrong position/color choosen
⑤ don't like
· Items that have been installed or altered are non-returnable but it must be reported to us immediately.
· If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
<p style="font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-size: 10px; font-family: " open="" sans",="" 微软雅黑,="" "microsoft="" yahei",="" 微軟正黑體,="" jhenghei",="" arial,="" helvetica,="" sans-serif,="" verdana;"="">· If you are satisfied with the product you received, wish you can leave us a feedback.
|
