Parameters:
Voltage: DC 12&24V
- Current: 40±2mA
- Environment temperature: ≤55℃
- UVC LED Luminous Power: 2.0-3.0mW
- Insulation and voltage resistance: AC 1500V, 50Hz / 1min
- Lifespan: >10,000H
- Dominant Wavelength: 260nm-270nm
Optical and Electrical Characteristics @TJ=25℃
Item | symbol | condition | Min | Average | Max | Unit |
Angle | 2θ1/2 | 12/24DC | --- | 120 | --- | deg |
Output | P | 12/24DC | --- | ≥2 | --- | mW |
Half-wave width | Δλ | 12/24DC | 8 | 11.5 | 12 | nm |
Peak Wavelength | λP | 12/24DC | 260 | 265 | 270 | nm |
| Features: |
| 1. High performance: Kill 99.99% of harmful bacteria with UV light in seconds. |
| 2. DIY Water Sanitizer solution: Clean water by installing a UVC LED module. |
| 3. Environmental friendly: Chemical-free ultroviolet lighting source. |
| 4. Long serving life: Nearly 10000 hours of working life. |
| 5. Third party tested: CE, RoHS certificates. |
6. Instant start.
|
UVC LED Testing
1.Turn on the UVC LED
2.Colon bacillus,The concentration of bacteria liquid is 3000cfu/mL,
Pick 0.1mL bacteria(about 300pc bacteria)to a board. Use this UVC led,
Shining 5min with distance 1cm,and then check.
3.Irradiated by a distance of 1 cm from the surface of the bacteria.
4.The shining time is 5 minutes.
5.Calculate the percentage of sterilization rate.