1. Item: ELPL78 / V13H010L78

2. Watt: 200 WATTS

3. Fit for Projectors: For Epson EX7230 EX5220 EX7235 VS230 EX7220 EX3220 EX5230 VS335W EX6220 VS330 EB-S18 V13H010L78 HOME CINEMA 2030 PowerLite X17 PowerLite S18+ HOME CINEMA 725HD HOME CINEMA 730HD HOME CINEMA 2000 PowerLite S17 PowerLite X24+ PowerLite 1284 PowerLite 97 EB-X24 PowerLite 98 EB-S03 EB-W28 EH-TW5200 EH-TW5100 PowerLite 1222 PowerLite 965 PowerLite 99W PowerLite HC 2030 EB-W18 PowerLite W17 EB-940 EB-945 EB-950W EB-955W EB-965 EB-97 EB-98 EB-S120 EB-S17 EB-S200 Projector Lamp.

INSTALLATION AND SAFTY - You will find it is quite easy to install it into your Projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well.

WARRANTY AND RETURN - New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

If You Want Your Projector Lamp Work Last Longer, Please Note:

 

1.Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.

 

2.Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.

 

3.Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters should be cleaned regularly.

 

4.Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.

 

5.Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode decreases projector brightness but the lamp will last longer.

6.Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.