HEKA 10 egg incubator for:
With electronic regulation temperature is set by
the silver adjusting knob and it's shown on the
angle thermometer on the right side of the
incubator. Highly suitable for export markets,
because these electronics make it impassible for
oscillations in power supply, and all electronics
components can be exchanged easily in case of
damage. The processor control system provides a
pleasant "Plus" of comfort in handling. The
brooding temperature can be adjusted in one
tenths of a degree - both set-temperature actual
temperature are shown simultaneously. Further,
an alarm is included. You set the alarm
temperature digitally - if this temperature is
reached, the alarm control light flashes up
(acoustical alarm on inquiry).
A double thermostat brings an even higher level of safety
to your incubator. If the main thermostat should allow this
temperature in your incubator to rise too high because of
technical failure, the double thermostat switches off the
heating and prohibits damage to the eggs. This is not
really necessary with a high-class HEKA incubator - but it
is a pleasant addition. In all incubators with electronics
regulation there is installed a membrane regulation as
double thermostat, in all incubators with processor-
control system the double thermostat is integrated into this
control system. The value for the double thermostat is
preset by us - you don't have to reprogram any values,
but you can just start brooding when you get yours
HEKA incubator.
If you brood waterfowl, it is absolutely necessary to cool down the
eggs once a day up from the ~11th day (up to the hatching-
phase). With incubators without cooling timer you have to do this
by opening the door for 20-30 minutes. If you choose your HEKA
incubator equipped with a cooling timer, you don't have to operate
this cooling by yourself (with the risk of forgetting closing the door),
but the incubator itself deactivates the heating for your desired/set
time, so that the temperature inside the incubator decreases. It is
essential, that all other functions of the incubator remain enabled -
only the heating is disabled.
The lower insulation value of the single glazing is advanta-
geous in export markets with hot surrounding temperatures,
because the incubator can lose temperature through the
door. But the disadvantage of steaming Windows at higher
values of humidity, persistence.In middle and north European countries, the insulated
Glazing is definitely the right choice. The insulation value is
much better, whereby the power-consumption decreases.
Further, insulated glazing begins to steam up just up from
~80% humidity - beyond those values which are needed
normally.
2 years warranty.
Dimensions: Width 48cm, Depth 50cm, Height 120cm,
Weight approx. 63 kg, power consumption in 24 hours, approx. 1.3kW
We also add our latest HEKA-Brutgeräte catalog (German, 124 pages full with: incubators, brooders, poultry-supply, mesh-wire, electric pasture-fences and nets for overdrawing, grain-mills, slaughtery-equipment, rabbit-supply, pigeon-supply, bird-supply, dog-supply, minerals and vitamines for poultry, pigeon and rodents, compounds for disinfection, vermin-control and pest-control, books and traps).
Further we produce the following incubators within this series "HEKA Standard"
Further we offer the complete range of poultry supplies - since more than 30 years. With HEKA, you can always be sure to get the best-available quality - fast and reliable!
All mentioned items are available on Ebay - or can be offered on Ebay shortly. For this - or for any other questions, you are always welcome to contact us: by mail or by phone: +49 5244 1718
Your Team from HEKA breeding devices