Front Spoiler Fits for BMW e90 3er, 2005 - 08 Frontlippe
BMW E90 E91 2005-08 Sedan Touring 2 x front spoiler lip spoiler
Item description
|
scope of delivery:
- 1 x Unpainted ABS 2xfront splitter / front lip (right & left) for BMW E90 (3 Series) Sedan Touring 2005-2008 before LCI (not FACELIFT) The item only fits original (OEM) shock bumpers, does not fit M3, Hamman, Harget bumpers!!!
Product description:
The front spoiler refines the vehicle with a dynamic finish - subtle and effective. The aerodynamic efficiency and directional stability increase at higher speeds. On the one hand, the front spoiler highlights the dynamic elegance and, on the other hand, additionally emphasizes the sporty look of the car in an individual way. By changing the aerodynamic characteristics, a sporty driving feeling is conveyed. The front spoiler is stylistically and functionally adapted exactly to the vehicle design.
Best material quality (ABS) and a careful paint finish make the difference! The spoiler is made of ABS material, which is characterized by high strength values, good media resistance, high hardness and good scratch resistance.
Right of withdrawal:
1 month return policy. If the item does not fit your vehicle, we guarantee an easy return. Please check whether your car is on the list. This is an accessory and not an original part.
Info about ABS material:
ABS, ACRYLNITRIL BUTADIENE STYRENE, is an amorphous thermoplastic.
The properties of ABS at a glance:
- high surface hardness - good impact resistance - scratch-resistant and matt shiny surfaces - good resistance to aqueous chemicals - not resistant to solvents - leasy to edit with normal tools - gering weight - gute resistance to chemical substances
LEGO bricks, snowboards, furniture industry, consumer goods with increased demands, etc. are all made of ABS.
What material is your suitcase made of? of course made of ABS ;))
|
Installation - assembly:
Easy to install, stick with adhesive tape and fix from below with a screw
-!!!- Before attaching the spoiler, please make sure the surface is clean and dry
Because the spoiler has a stop on the outside of the wheel arch housing and therefore cannot move forward and the wind presses the spoiler against the bumper
Please do not use a cutter/knife or similar to unpack the items. This puts you at risk of damaging the goods!
NOW: TÜV Nord material certificate for all FLY DESIGN spoilers made of ABS material.
- The TÜV Nord material report confirms that the ABS material of our spoiler has been tested and meets the requirements of applicable regulations. The material has been thoroughly checked for defects or potentially hazardous materials.
- The test was carried out by: TÜV NORD Mobility GmbH & Co. KG, IFM - Institute for Vehicle Technology and Mobility, Schönscheidtstr. 28, 45307 Essen | IFM - Office, Am TÜV 1, 30519 Hanover
- The test report was created on March 2nd, 2022. The various tests were carried out based on din 52306.
- The test covered the following areas: splinter resistance, flammability, edge and surface flames.
Uncomplicated, fast and safe!
Have you found the right product? Then you can order immediately! Uncomplicated, quick and secure in just a few steps.- 1. You choose the right product on Ebay.
- 2. The entire purchase process takes place exclusively via Ebay. There are two payment options available to you: PayPal and advance payment/bank transfer.
- 3. All paid orders received by us by 2 p.m. will be shipped the same day.
- 4. You will usually have your product in your hands on the next working day. Delays depending on shipping service providers cannot be ruled out here.
Key Features
| ABS spoilers | Our ABS spoilers are made from a very stable and solid material. The advantage of the spoiler is clearly the accuracy of the fit and the quality. No further adjustment work is required here. You will receive the spoiler delivered and can install it directly. |
| PU spoiler | Our PU spoilers are made from a flexible material. The spoilers are delivered straight and must be adjusted to the shape of the rear. This is done by heating it (e.g. on a heater or with a heat gun) and bending it to the desired shape. |
| duct tape | Please don't forget to heat the 3M adhesive strips before installation. This guarantees that the spoiler will not come off. |
payment
Paypal
Transfer
Credit card
Shipment
Contact
Do you have any questions about our offers? Contact us using the eBay contact form.
eBay message| Einbau /Montage/Installation 2 | Vor Montage, Oberfläche sauber & trocken machen |
| style | wie performance M sport paket tuning |
| Baujahr Model years | 2005-2008 |
| Referenznummer(n) OEM | kofferraum spoiler lippe Heckspoilerlippe Splitter |
| Referenznummer(n) OEM | DIFFUSOR FLAP ANSATZ Flips |
| Referenznummer(n) OEM | duck tail trunk lip becquet levre |
| Referenznummer(n) OEM | BMW tuning aerodinamik felgen exterior karossiere |
| Hersteller | fly design gmbh |
| EAN | 4065446960314 |
| Einbau /Montage/Installation 1 | Kleben mit Klebeband & unten 1 Schraube fixieren |
| years Baujahre | BMW 3er 2005 2006 2007 2008 |
| Einbauposition | Links |
| Einbauposition | Rechts |
| Einbauposition | Vorne |
| begriffe | abs harte spoiler abrisskante wing flügel |
| Herstellernummer | 56742764 |
| auto model wagen kfz | BMW E90 E91 Frontspoiler vor FACELIFT 2005-08 |
| Anzahl der Einheiten | 2 stück ( recht und links) |
| farbe colour color | unlackiert (raw material ABS, schwarz) |