Parameter：

Model: DN15/ DN25/ DN32

Control pressure: 0.3Mpa-1Mpa

Body material: 304 stainless steel

Pneumatic form: plastic head

Spool seal: PTFE

Stem seal: PTFE/FKM

Piston seal: FKM/NBR

Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution

Medium temperature: PTFE: -10 ° C - +180 ° C

Ambient temperature: -10 °C - +60 °C

Viscosity: up to 600MM2/s

Control medium: air/neutral gas

Control pressure range: 0.3-1MPA

Installation: Install as needed, preferably with the actuator facing up

Features: large flow, long life, maintenance free, reliable

Widely used in: beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment.

Installation and removal:

1. Connect the valve to the pipe to ensure that it is in the same direction as the flow and attached to the body (the outside of the body represents the direction of fluid flow, according to the installation);

2. Please remove the actuator when welding installation;

3. Threaded or flanged: correct installation;

4. Disassembly: Ensure that the pressure has been removed before disassembling the valve; carefully disassemble and properly store the thread and sealing material after removal.

5. The torque required for the connection of the valve and the pipeline is large enough. The torque value of the torque is as follows: DN15 to 40Nm

6. Ensure that the pipeline and no residual interface when installing.

7. Make sure there are no leaks before use.