9IMOD Tracker F405 V2 F4 V3S Flight Control Stack FC Support BetaFlight BLS-50A/65A 4in1 ESC Board 2-6S for RC FPV Drone Plane Quadcopter DIY Parts Features: 1. Built with the firm STM32F405 MCU. Using the F405 main control chip to achieve parameter tuning of Betaflight. 2. Powerful 50A/65A 4-in-1 ESC: Brings a smooth flight experience. Real 50A/65A output, ready for your 2-6S motors. 3. Faster calculation speed, More sensitive response. 4. The continuous current of BLS-50A/65A 4 in 1 ESC, the the burst current is 55A/65A for 10 seconds. Support DShot150-300-600/Multishot/Oneshot/PMW. 5. The mounting size is 30.5 x 30.5mm and the hole diameter is 3mm, which is suitable for most models in the market. You can according to it choose whether it is fit your models or not.
Specifications: Brand: 9IMOD Series: Tracker
F405 V2 Flight Controller Size: 36x36mm Weight: 13g Installation hole: 30.5x30.5mm STM32 F405 microcontroller Dshot support Drag and drop OSD configured through Betaflight Gyroscope: MPU6500 Supports receivers such as ELRS/CRSF/SBUS/IBUS PPM/Spketorum DSMX, etc MicroSD card black box Baro (BMP280) BEC: 5V3A/9V3A Car video filter (only 5V to VTX and camera) Suitable models: 5 inches, 6 inches, 7 inches, 8 inches, 9 inches, 10 inches, 13 inches, 15 inches, traversing aircraft/drones, etc Please note: The F405 flight controller only supports Betaflight software and does not support INAV firmware
50A V2 4in1 ESC HV 2-6S Size: 41 * 39 * 5mm Aperture: 30.5 * 30.5mm (after installing the shock absorber ball, the aperture is 3mm) Firmware: BLHELI-S Weight: 15g Input voltage: LIPO 2-6S Continuous current: 50A Maximum current: 55A (10 seconds) Processor: EF8BB21 Drive signal support: DShot150-300-600/Multishot/Oneshot/PMW Current sensor: supports
65A V2 4in1 ESC HV 2-6S Size: 41 * 39 * 5mm Aperture: 30.5 * 30.5mm (after installing the shock absorber ball, the aperture is 3mm) Firmware: BLHELI-S Weight: 15g Input voltage: LIPO 2-6S Continuous current: 65A Maximum current: 70A (10 seconds) Processor: EF8BB21 Drive signal support: DShot150-300-600/Multishot/Oneshot/PMW Current sensor: supports
Note: Only the above package content, other products are not included. 1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase: 1.All the goods are ready stock, we will arrange the shipment at once if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.No warranty,if you receive a defect item,please contact us at once with item picture. 4.Use the vouchers for more saving.
After purchase: 1.If you are satisfied,please express your use feeling. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.