3200W Electric Heating Tap Instant Hot Water Heater Faucet For Kitchen Bathroom
welcome~

Description

This electric tap with a display allows you to see the water temperature at a glance, so you never have to test the water temperature manually again. Its one-piece body allows you to use it directly on the sink without complicated installation. The modern-style tap will be a powerful addition to your bathroom or kitchen.

 

Key Features

Anti-drip Design: This faucet uses a high-quality ceramic core to build the important heart of the faucet, along with a silicone ring gasket and 6-jaw fixing nut, making it resistant to high temperatures, corrosion, and drip-proof.  

Long Service Life: This product is made of high-quality stainless steel and the surface is brushed, with high hardness, high abrasion resistance, anti-corrosion, and anti-rust performance.

 

Real-time Temperature Display: The LED digital display on the body timely shows the current water temperature, allowing you to see the water temperature at a glance and thus avoiding scalding.

 

Stylish Appearance: The classic silver color, gooseneck spout, and clean lines give the product a modern style, making it compatible with various styles of sinks.

 

Easy to Operate: You can adjust the water volume and temperature((86-140℉)) by turning the lever left and right (the temperature can be adjusted according to the volume of water, the smaller the volume the higher the temperature), so even the elderly and children can easily operate it.

 

High Safety: The product has IPX4 waterproof rating, you will not worry about the performance and safety being affected by water vapor. Internal water and electricity separation design, leakage protection, anti-dry burning design, and overheating protection (automatic beeping alert when the temperature is greater than 140℉) can better protect your safety.

 

Efficient Heating: The high-performance stainless steel heating tube and 3200W high power ensure that the product heats up quickly within a few seconds. Unlike traditional electric water heaters, the top and bottom of the inlet and outlet correspond to each other, eliminating the need for water reserves and reducing heating time.

 

Saving Water and Space: The one-piece simple body design eliminates the need to store water to preheat and keep warm to avoid more water use. The tankless design also effectively saves space.

 

Wide Application: The design of hot and cold water dual use allows you to use water comfortably in both summer and winter.  In addition, the working water pressure is 0.04-0.5MPa, which allows hot water to be provided at any time even in high-rise buildings, old residential areas, or at peak times of water consumption.

 

Easy to Install: The simple structure of the product and the complete installation parts help you to complete the installation quickly. You just need to connect the base to the inlet pipe and install it on the sink to use.

 

Details

Cable Tie: It is used to tie the power cord to avoid cluttered wire, thus creating a tidy environment.

 

360° Rotatable Tap: The tap that can rotate 360° freely can fully expand the water area and work flexibly, bringing you a more comfortable user experience.

 

Stainless Steel Heating Tube: The built-in stainless steel heating tube has a long service life and is not easy to accumulate limescale. It can protect the health of you and your family while delivering water quickly.

 

Detachable Spout: The detachable design is more convenient for you to clean and replace, thus providing you with a cleaner water source.

 

Application

It is an essential accessory for homes, kitchens, bathrooms, restaurants, laundromats, offices, hotels, bars, cafes, restaurants, etc. It is especially suitable for families with elderly or children. It is ideally suited for single or double sinks.

 

Specification

Model: BWF-KM11VR30

Material: Stainless Steel

Color: Silver/Black

Process: Drawing Process

Assembly Required: Yes

Water Inlet: Underwater

Display: LED

Power Rating: 3200W

Plug: EU Standard

Voltage: 220V-240V, 50Hz

Waterproof Rating: IPX4

IEC Protection Class: I

Starting Flow: 600-850ml/min / 25.36-35.93Oz/min

Working Pressure: 0.4-5Bar/0.04-0.5MPa

Power Cord Specification: 1.5mm2/0.002 square inch    

Power Cord Length: 1.4m/4.59ft

Temperature Range: 30-60℃/86-140℉

Inlet Pipe Specification: G1/2

Power Source: Corded Electric

Gross Weight:1.7 kg/ 3.75 lbs

Product Size(L*H): 22*38.5 cm/ 8.66*15.16 in

Base Diameter: 6cm/2.36in

Package Size: 48.2*9.3*25.6 cm/ 18.98*3.66*10.08in

 

Package Included

1 * Electric Tap

1 * English Manual

All Accessories for Installation

 

Notes

  • The faucet is started by water pressure. Users with a water tank, water tower, or non-running water, or whose water pressure is too low (The drop height of the water tank and water tower is less than 19.68ft.) are not recommended to buy it. This product should only be used when properly and safely connected to a constant, stable power and water source. For low water pressure areas such as water tanks, please consult the online service before purchasing.
  • Please note that this item only supports the lower influent way and it should be installed on the countertop or sink, not on the wall or water pipe for the lateral influent way. Please test the water first after installation: check for leaks; run the water first, then the electricity!
  • Please ensure that water is connected before electricity when you install this product. Please install the product vertically instead of tilting or upside down. Please do not install a water purifier, water tap, or other devices to block the original parts, to avoid affecting the normal outflow of the machine and hindering the heating of the machine, thus damaging the equipment.   
  • The outlet temperature is determined by: the temperature of the incoming water; the power rating of the unit; and the speed at which the water flows through the unit.
  • The outlet should not be connected to any instant hot water faucet or fitting unless required in the instructions.
  • Please do not install this product outdoors. This appliance is intended for indoor home use and drinking water only.
  • Some residual water may remain inside the product. This is very normal and is the result of careful safety testing of each product before packaging.

 

  • Please make sure the water flow is high enough to avoid sudden temperature rise and fuse blowing.
  • Please be sure to unplug and disconnect the water and power when the temperature falls below 32℉ or when the water freezes.
  • Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
  • Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
PushAuction