Welcome To Our Company Online Store - MiCWL Audio Inc.
MICWL PX8000 Amplifer is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional
sound engineers,
working musicians and professional DJ's. For its price range, it's rare to find a professional power amplifier that compares with
the PX8000 awesome performance,
flexibility and crystal clear sound quality.
19" 1U Professional Power Amplifier Design
( 90V-240V universal version 4 Power Versions options ) :
1. 3600 Watts @ 4 Ohms ( 2 x 1800W )
2000 Watts @ 8 Ohms ( 2x 1000W )
2. 4200 Watts @ 4 Ohms ( 2 x 2100W )
2800 Watts @ 8 Ohms ( 2x 1400W )
3. 7000 Watts @ 4 Ohms ( 2 x 3500W )
4000 Watts @ 8 Ohms ( 2x 2000W )
With bridging function
Bridging Power (Mono Channel mode) :
8000 Watts @ 4 Ohms RMS
6000 Watts @ 8 Ohms RMS
4. 2x Channel
7200 Watts @ 4 Ohms ( 2 x 3600W )
4800 Watts @ 8 Ohms ( 2x 2400W )
With bridging function
Bridging Power (Mono Channel mode) :
8000 Watts @ 4 Ohms RMS
6400 Watts @ 8 Ohms RMS
1. MiCWL PX8000 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference
hassls, transportation hubs and so on.
2. Use the world's most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design.
3. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation
4. adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature.
5. Built in Digital audio processor function.
6. With volume switch,Adjustable volume
7. Full set of protection functions to ensure that the product normally working
8. With Combined signal function,Multiple amplifiers can be connected in parallel to drive multiple speakers.
PARAMETER:
Input Voltage: AC220~240V, 50/60Hz or AC110~120V, 50/60Hz
(please leave message or Choose)
XLR, Balanced Inputs
Speakon and 1/4" Outputs
Front-to-Rear Airflow and Cooling Fan
Technical Specification :
Large capacity Digital Switching Power Amplifier
Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions
The power amplifier is equipped with a delay start system to protect the speakers from impact and damage
The rear panel is equipped with dual channels,
Balanced input interface
SPEAKON output connector
483MM standard frame structure
The switching power supply of the power amplifier part has a separate cooling system
The cooling fan is controlled by an advanced stepless variable speed circuit
1U design, light body, easy to carry and install
Cannot bridge
Output/Output (8Ω, 1kHz) RMS: 2x650W / 2x850W/ 2x1000W / 2x1400W/ 2x2000W / 2x2300W.....
Output/Output (4Ω, 1kHz) PEAK: 2x1300W / 2x1600W/2x1800W/ 2x2100W / 2x2300W.....
Distortion: <0.005%
S/N ratio: 112dB (A-weighting)
Damping coefficient: >1000
Conversion rate: 50V/us
Frequency Response/Frequency Response: 20Hz~20kHz +/-0.25dB
Total Distortion/Total Distortion: 1% (8Ω, at 600W)
Input Sensitivity/Input Sensitivity: +3dB * (0.775V)
Input Impedance: 10kΩ (electronically balanced/Balanced)
DC residual: <5mV
Connect terminal Connector:
Input (CH1-2 3-4): XLR input connector; Output (CH1-2 3-4): SPEAKON output; Power: AC power Input (CH1-2 3-4): XLR Input
Connector; Output (CH1-2 3-4): SPEAKON Output; Power: AC power supply.
Indicator Lights:
Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red)
Power Indicator x 1 (Green), Input Indicator x 2 (Yellow ), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red)
Power Supply Voltage:
AC220~240V, 50/60Hz / or AC110~120V, 50/60Hz (using internal jumper switch/Via inside jumping switch)
1/8 Rated Activity Consumed Power: 50W, 80W, 110W
Working Temperature Range: 0~50℃
Working Humidity Range:
Below 90%RH/Under 90% RH (But it can not be condensation)
How much Speaker can this amplifier drive:
650W each Channel:
It Can Drive 850W or less 650W @ 8 Ohm Sound Speaker each Channel
- If your speaker is no more than 650 watts, this amplifier is enough to drive.
( 4 Channel can Drive 4 Unit 650W Speakers )
850W each Channel:
It Can Drive 850W or less 850W @ 8 Ohm Sound Speaker each Channel
- If your speaker is no more than 850 watts, this amplifier is enough to drive.
( 2 Channel can Drive 2Unit 850W Speakers )
2300W each Channel:
It Can Drive 2300W or less 2300W @ 4 Ohm Sound Speaker each Channel
- If your speaker is no more than 2300 watts, this amplifier is enough to drive.
( 2 Channel can Drive 2 Unit 2300W Speakers ) ..
.....
.....
.....
Warranty: