Feature: 1. 1‑phase or 3‑phase 110V input, three‑phase 110V output, frequency: 0‑50hz / 60hz. 0‑400hz. 2. If you have no experience in driving a VFD, please refer to the instructions before operating the VFD. 3. Just connect L1/L2 to any two of the VFD inputs R/S/T, which is easy to use. 4. Can be used as a motor speed control and phase converter in conjunction with the for Mach 3 controller. 5. This project uses sine waving PWN (SPWM) for the control system.
Specification: Item Type: Inverter Model: HY02D211B Material: ABS Input Voltage: Single-phase 110V Output Voltage: Three-phase 110V Matching Motor Power: 2.2KW
Control Way |
SPWM |
Input power |
110V power supply: 100-120V |
5-digit digital display and status indicator |
Display frequency, current, speed, voltage, counter, temperature, forward and reverse status, fault, etc. |
Communication control |
RS-485 |
Operating temperature |
-10~40℃ |
humidity |
0~95% relative humidity (no condensation) |
vibration |
Below 0.5G |
Frequency control |
Range |
0.10~400.00Hz |
Accuracy |
Digital type: 0.01% (-10-40℃); analog type: 0.1% (25±10℃) |
Set the resolution |
Digital: 0.01Hz; Analog: 1% of the maximum operating frequency |
Output resolution |
0.01Hz |
Keyboard setting method |
Can be set directly with ←∧∨ |
Analog setting method |
External voltage 0-5V, 0-10V, 4-20mA, 0-20mA. |
Other functions |
Frequency lower limit, start frequency, stop frequency, three frequencies can be set separately |
General control |
Acceleration and deceleration control |
Acceleration and deceleration time (0.1-6500 seconds) arbitrary choice |
V/F curve |
V/F curve can be set arbitrarily |
Torsion control |
The torsion can be set to increase, the maximum 10.0% start torsion can 150% at 1.0Hz |
Multi-function input |
6 multi-function input terminals, realize 8-stage speed control, program operation, 4-stage acceleration/deceleration switching, UP, DOWN function, counter, external emergency stop and other functions |
Multi-function output |
There are 5 multi-function output terminals, which can realize the indication and alarm of running, zero speed, counter, external abnormality, program running, etc. |
Other functions |
Automatic voltage regulation (AVR), deceleration stop or stop, DC brake, automatic reset and restart, frequency tracking, PLC program control, traverse control, adjustable carrier, up to 20KHz, etc. |
Protective function |
Overload protection |
Electronic relay to protect the motor, driver (constant rotation short 150%/1 minute, fan 120%/1 minute) |
protection |
melts new, the motor stops |
Overvoltage |
220V line: DC voltage> 400V; 380V line: DC voltage> 800V |
Undervoltage |
220V line: DC voltage <200V; 380V line: DC voltage <400V |
Restart after instantaneous power failure |
After Shun stops, it can be restarted in frequency tracking mode |
Stall prevention |
Stall prevention during acceleration/deceleration operation |
Short circuit at output |
Electronic circuit protection |
Other functions |
Heat sink overheating protection, reverse rotation limit, function parameter lock for direct start after power-on and fault recovery, etc. |
Package List: 1 x Inverter 1 x User Manual
Note: 1.This VFD is ONLY applicable to three phase 110V asynchronous motor 2.Dont support external resistor(the function needs to be customized by notifying the seller before purchase). 3.Fan runs all the time even though the motor stop. 4.If your motor is 50/60hz, you need to change the parameter of the VFD to be consistent with the motor
1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties. 2. duties,taxes,and charges are not included in the item price or shipping fee. 3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase. 4. All disputes arising from the duties will be submitted to ebay for solution. 1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails. 2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
|