Feature:

1. 1‑phase or 3‑phase 110V input, three‑phase 110V output, frequency: 0‑50hz / 60hz. 0‑400hz.
2. If you have no experience in driving a VFD, please refer to the instructions before operating the VFD.
3. Just connect L1/L2 to any two of the VFD inputs R/S/T, which is easy to use.
4. Can be used as a motor speed control and phase converter in conjunction with the for Mach 3 controller.
5. This project uses sine waving PWN (SPWM) for the control system.

Specification:

Item Type: Inverter

Model: HY02D211B
Material: ABS
Input Voltage: Single-phase 110V
Output Voltage: Three-phase 110V
Matching Motor Power: 2.2KW

Control Way		SPWM
Input power		110V power supply: 100-120V
5-digit digital display and status indicator		Display frequency, current, speed, voltage, counter, temperature, forward and reverse status, fault, etc.
Communication control		RS-485
Operating temperature		-10~40℃
humidity		0~95% relative humidity (no condensation)
vibration		Below 0.5G
Frequency control	Range	0.10~400.00Hz
	Accuracy	Digital type: 0.01% (-10-40℃); analog type: 0.1% (25±10℃)
	Set the resolution	Digital: 0.01Hz; Analog: 1% of the maximum operating frequency
	Output resolution	0.01Hz
	Keyboard setting method	Can be set directly with ←∧∨
	Analog setting method	External voltage 0-5V, 0-10V, 4-20mA, 0-20mA.
	Other functions	Frequency lower limit, start frequency, stop frequency, three frequencies can be set separately
General control	Acceleration and deceleration control	Acceleration and deceleration time (0.1-6500 seconds) arbitrary choice
	V/F curve	V/F curve can be set arbitrarily
	Torsion control	The torsion can be set to increase, the maximum 10.0% start torsion can 150% at 1.0Hz
	Multi-function input	6 multi-function input terminals, realize 8-stage speed control, program operation, 4-stage acceleration/deceleration switching, UP, DOWN function, counter, external emergency stop and other functions
	Multi-function output	There are 5 multi-function output terminals, which can realize the indication and alarm of running, zero speed, counter, external abnormality, program running, etc.
	Other functions	Automatic voltage regulation (AVR), deceleration stop or stop, DC brake, automatic reset and restart, frequency tracking, PLC program control, traverse control, adjustable carrier, up to 20KHz, etc.
Protective function	Overload protection	Electronic relay to protect the motor, driver (constant rotation short 150%/1 minute, fan 120%/1 minute)
	protection	melts new, the motor stops
	Overvoltage	220V line: DC voltage> 400V; 380V line: DC voltage> 800V
	Undervoltage	220V line: DC voltage <200V; 380V line: DC voltage <400V
	Restart after instantaneous power failure	After Shun stops, it can be restarted in frequency tracking mode
	Stall prevention	Stall prevention during acceleration/deceleration operation
	Short circuit at output	Electronic circuit protection
	Other functions	Heat sink overheating protection, reverse rotation limit, function parameter lock for direct start after power-on and fault recovery, etc.

Package List:

Note: