PERFORMANCE:
Available Torque Max1.0Lb-ft(1.4Nm)
Maximum Operating Shaft Angular Travel 25+/- 1degree CW/CCW
1A at 24VDC
3 A at 24VDC
ENVIROMENTAL:
Temperature Range -54 to 95
Relative Humidity up to 100%
All Surface finishes Fungus of and corrosion resistant
PHISICAL:
Weight 2.3 kg
Mounting Any position, electrical connector at the top preferred
RELIABILITY:
Vibration up to 20G @50-500 Hz
Testing 100% Tested
MATING HARDWARE
Connector Supplied With Actuator
Lever LE1500-2
Rod End Bearings(to attach a 12#20 HD linkage rod to lever) BR100(Right Hand)
BR101(Left Hand)
Wiring Harness ADC120 4ft. Harness supplied with actuator, other length available from Actuator
colour:gray
Material:metal
size:16*16*14cm
ESD5500E diesel generator speed control
SPECIFICATIONS&PERFORMANCE:
PERFORMANCE
Isochronous Operation/Steady State Stability.......................................... ± 0.25% or better
Speed Range/Governor .............................................................. 1K7.5K Hz continuous
Speed Drift with Temperature .................................................................... ± 1% Maximum
Idle Adjust CW .................................... ............................................ 60% of set speed
Idle Adjust CCW .................................................................................. Less than 1200 Hz.
Droop Range ........................................................................................... 1 5% regulation*
Droop Adj. Max. (K-L Jumpered) ................................... 400 Hz., ± 75 Hz. per 1.0 A change
Droop Adj. Min. (K-L Jumpered) ....................................... 15 Hz., ± 6 Hz. per 1.0 A change
Speed Trim Range ........................................................................................... ± 200 Hz.
Remote Variable Speed Range ............................................. 500 7.5 Hz. or any part thereof
Terminal Sensitivity
J .................................... .............................. 100 Hz., ± 15 Hz / Volt @ 5.0 K Impedance
L ....................................... ....................... 735 Hz., ± 60 Hz / Volt @ 65 K Impedance
N ............................................................. 148 Hz., ± 10 Hz / Volt @ 1 Meg. Impedance
P ..................................................................................... 10 VDC Supply @ 20 ma Max.
ENVIRONMENTAL
Ambient Operating Temperature Range .... ............ -40° to +180°F (-40° to +85°C)
Relative Humidity .......................................................... up to 95%
All Surface Finishes.............................................. Fungus Proof and Corrosion Resistant
INPUT POWER
Supply ......... ..... 12 or 24 VDC Battery Systems (Transient and Reverse Voltage Protected)
Polarity ....................................................................... Negative Ground (Case Isolated)
Power Consumption ........................................ 50 ma continuous plus actuator current
Actuator Current Range @ 77°F (25°C) - (Inductive Load) ....................... Min. 2.5 Amps, Max. 10 Amps continuous
Speed Sensor Signal ............................................................................ 0.5120 Volts RMS
RELIABILITY
Vibration ................................................................................................. 1G @ 20100 Hz.
Testing ................................................................................. 100% Functionally Tested
PHYSICAL
Dimensions ........................................................................... See Outline (FIGURE 1)
Weight ............................................................................................... 1.2 lbs (545 grams)
Mounting ..................................................................... Any Position, Vertical Preferred
Measure range: 50-5000Hz
Inductance: 142MH+25%Thread Size: 5/8-18 UNF-2A
Tap Drill Size: 37/64 inch
Proximity to Gear Teeth: .028 in min. - .042 in max.(Apximately 1/2 to 3/4 turn)
Temperature Range: -55 deg C to 105 deg C
Output at Cranking Speed: 1.5 volts AC minimum
Maximum Output: 30 volts AC
Coil Resistance: 300 ohms maximum
MSP675 Magnetic Pickup MPU Generator Speed Sensor
Range:50-5000Hz
Inductance value:142MH+25%
Resistance value:300Ω MAX
Thread:5/8-18UNF-2A
Off-tooth distance:0.64-0.89mm
Temperature range:-55℃ celsius to 105℃
Idle output:1.5 volts AC Min
MAX output:30 volts AC