Moolan X1 Cordless Pool Robot Automatic Robotic Pool Vacuum Cleaner, Dual-Motor, Dual Long Suction Ports, 20s Fast Water Release
X1 Cordless Robotic Pool Cleaner
 
Please come "here" to order other colors!
 
 
Visible Housing Design
- You can see the hall rotor directly.
 
Fashion Curved Design
- Reduce resistance from the water, absorb the waste from the pool more effectively.
 
Hydro Dynamic Design
- Allow the device pick up dirt and debris as it propels across the pool floor.
 
Intelligent Hall System
- Control the status of the host in real time; Free your hands completely.
 
Symmetric Dual Motors
- 35W powerful dual motors, increased 20% more than other pool cleaners in the industry.
 
Long Dual Suction Ports
- Higher-efficiency cleaning, and larger cleaning area (can clean up to 914 sq.ft pool area).
- Suction Power/Flow Rate: 25GPM/95LPM
 
3 Hours Fast Charging
- Equipped with a 5200mAh large capacity battery pack(6*cell), the device can be fully charged in 3 hours, and provides you a superb working time up to 120 mins.
 
20s Rapid Water Release
- Can drain all stored water in just 20 seconds.
- Filter Basket Capacity: 2L
 
Adaptive Speed Adjustment
- The robot will automatically adjust its movement speed based on the current terrain to save energy and improve efficiency.
- Can climb up a slope ≤10°, and overcome obstacles ≤5mm.
 
Self-Parking
- When the garbage tray is full (filter blocked), or the battery is below 10%, the robot will automatically approach the wall of the poll to make it retrieved easily by you.
 
Auto-Steering Function
- When the robot comes against to the wall of the pool or other obstacles, it will automatically change its direction within 6 seconds.
 
Intelligent Escape from Difficulties
- When it is unable to move around in a place for long time, the robot will do an action of getting rid in a loop to different directions at its maximum power till it escapes from the trap successfully.
 
Simple Installation & Easy Cleaning
- Modular design, can be simply installed by both the old and kids.
- The filter tray is easy to clean. Just remove the cover, and rinse it by a hose (NOTE: We suggest you clean the hall rotor and filter every time you use the robot, to ensure they are not block, and keep the whole device longer service life).
 
 
 
Multidirectional Detection:
1. Detection in water (60s self-check): Generally, the robot can only work in water. The robot will be checked by the sensor whether it is on land or in water. If the machine is self-checked it is not in water, its will make out a continuous "beep" error sound. The default time is 1 minute. If the robot is not in water in 1 minute, it will automatically shut down to save power.
2. Delay to start in water (25s delayed): To ensure the machine goes into the water smoothly, or avoid it rolling while it sinks, the robot will start working in 25 seconds from the time when it enters into the water.
3. Filter-in-place detection: To avoid filters missing, result in ineffective cleaning.
4. Hall system detection: Precise detection of the host.
 
PushAuction