New USB 3 AXIS CNC 6040 Engraver 1500W VFD Motor Engraving Machine w/ Remote
welcome~

Attention : This Machine Comes with Eu Plug , Please Prepare an Uk Adapter Plug Cable Yourself 

Attention

Notes:please Prepare a Computer with Usb Interface.
 
Attention: It Is Also Not Recommended to Connect to a Computers with 64 Bit Versions of Windows Due to Problems with the Usb Port Driver. These Issues Are Detailed and Fully Explained on the Software Website.
 
 
Description:
Suitable forPcb, Wood, Plexi Glass, Pvc, Crystal Acrylic, Resin, Plastic, Seals, Mdf, Composite, Aluminum Material, Copper,
1. This Cnc 6040 Machine Is Suitable for Industry, Technology Research, Advertising Design,
Arts Creation, Teaching, Student Project and Hobby Purposes.
2. It Can Work with Various Materials(Metallic & Non-metallic), Such As: Wood, Pmma or Other Plastic, Mdf Board, Native Wood, Pvc, Acrylic, Wood, Composite Board Plywood. and Soft Metal .like Aluminum, Copper and Silver to Engrave Them into 3d/2d Works Etc.
 
 
3. It Can Used for Engraving: Advertising Signs, Pcb, Nameplates, Badges, Seals, Bronzing Plate, Aluminum Alloy, Acrylic Plates, Abs Resin Doublecolor Plate,Pvc Foaming Board, Indentation Plates, Signs, Construction Models, Instrument Panels, Wooden Products, Etc.
 
 
4. the Mini Cnc Router Frame Is Movable. the Machine Can Connect with Computer As Other External Device Such As Printer , Scanner...
 
 
5. with the Assist of the Cnc Router 6040t, Your Design Idea Will Be Real-time Display.
 
Cnc Engraving Machine Parameters:
 
 
 
X, Y, Z Working Area: 600(Y)*390x*120(Z)Mm
Outside Dimension: 865*680*570mml*W*H
Table Size: 770y*490xmm
Lathe Structure: 6061/6063 Aluminium Alloy
Max. Feeding Height: ≤100mm

Drive Unit:

X Axis---1605 Ball Screws
Y Axis---1605 Ball Screws
Z Axis---1204 Ball Screws

Sliding Unit:

X Axis---High Intensity Chromeplate Shaft
Y Axis---High Intensity Chromeplate Shaft
Z Axis---High Intensity Chromeplate Shaft
Stepping Motor: 57 Two-phase 3a 150n.cm

Spindle Motor:

(Tips1. the Spindle Motor Must Connect with the Vfd.
2. It Cannot Directly Connect with the Supply Voltage (Ac220v).
3. Please Don’t Change the Data Setting of the Vfd If You Are Not Professional Technicians, or It Might Damage the Spindle Motor.)

Outside Dimension: 65*158mm
Material: 304 Stainless Steel, Copper Coil, Pressure Cast Aluminum Pipe Water Jacket
Volts, Current, Power: Ac220 /50hz, 5a, 1.5kw Vfd
Spindle Speed: 24000 Rpm
1water Cooled Spindle Motor Can Work Longer Time than Air Cooled Motor.
2water Cooled Spindle Motor Has Higher Stability and Better Concentricity than Air Cooled Motor.
Max Working Frequency: 60hz
Principal Axis Collet: Er11colletstandard Configuration :6mm
Nut Model: Er11-a
Cooling: Water-cooling
Speed Mode: by Adjusting the Vfd Output Voltage and Operating Frequency from 0-24000rpm
Lubrication Way: Lubricated by High Grease
Repeat Accuracy: 0.05mm
Spindle Precision: Radial Beat Acuities 0.03mm
Carving Instructions: G Code / Tab Files / Nc File / Ncc Files
Communication Interface: Through Usb Connection with Computer
Software Environment:32-Bit Version of Windows 2000, Windows Xp, Windows Vista, or Windows 7 (64-Bit Versions Will Not Work)
1ghz Cpu
512mb Ram
Non-integrated Video Card with 32mb Ram(Large G-code Files, Especially 3d Files Will Require a Video Card with 512mb Ram or Higher)

Maximum Idle Speed:1500mm/Min
Working Speed :50-1500mm / Min (Different Material with Different Speed Settings)

Friendly Reminder:
The Engraver Will Come with Softwarefree Version
If You Followed the Installation Tips Offered by Us, It Works like Full Version.

Installation Tips:
The Software Perform Better on the 32bites System Computer.
Please Close the Firewall and Antivirus Software on the Computer Before Downloading and Installing the Software.(This Is Very Important)
Otherwise, the Antivirus Will Regard the Cnc Software As Virus and Stop the Installation.
Ps:please Don't Update the Software When Installed, Then It Will Not Need the License Numbers.
 
Control Box Parameters:
Operating Voltage: Ac220v
Control Unit: Toroidal Transformer + Pwm Power Supply Module + Tb6560 Stepping Motor Drive
Computer Connection: Usb Port
Command Code: G Code
Acceptable Software:
Protection: Emergency Stop Button
 
Feature:
1. the New 1.5kw Water-cooled Vfd Is Available Operating for Long Time,Which Can Reinforced the Processing Abilty of the Machine and Can Be Used Toprocess Aluminum Alloy and Hard Wood.
 
2. Water Cooling Spindle Works More Stable and Durable.
3. High Quality Accurate Ball Screws Drive Make the Engrving More Precision.anti-blackflash,High Precision,Long Life Circle.
4. Software Compatabilitytype3/Artcamparameter
How to Use:
1. Assembling and Locating the Cnc Machine on Steady Desk Well.
2. Make Sure That Your Computer Has a Usb Port Output.
3. Place the Contral Box in a Ventilated Dry Place Where There Is No Dust, No Moisture
4. Connecting the Control Box with the Cnc Machine and You Computer and Make Sure the Plug Will Not Come off.
5. Correctly Connect the Machine with the Controller. Don't Suspended the Cable Which Connect the Spindle Motor with Axis(X,Y,Z,a).Otherwise, It Will Damage the Driver of the Controller.
6. Correctly Instal the Spindle Motor and the Heat Pump. the Heat Pump Should Be Covered Completely in the Water, Then Turned on the Electric Current to Check Whether the Water-cooling System Working Well.
7. Installing a Cnc Control Software and Drive Such As the on Your Computer.
8. Fllowing Our Manual or Guideline to Set Uo the Software.
9. Before Turn on the Machine, Please Check All the Cable and Water-cooling System to Make Sure They Are Working Fine.
10.You Can Enjoy Making You Dream with Using Our Cnc Machine Now.
 
Description:
 
 
Do Not Need to Install Any Software and Driver, Spring Can Be Stretched to 3 Meters
 
 
Waterproof Design, Very Durable, Anti-dirt, Oil Spray
 
 
Power by Parallel Port
 
 
Dimensions: 22 X 8 X 3cm

The Usb Self-check Light, You Can Type the " Scroll" on the Keyboard to Activate It.

Directional Motion Control: X+, X-, Y+, Y-, Z+, Z-, a+, a-
 
 
Feed Rate Control: F+, F-
 
 
Jog Rate: J+, J-
 
 
Spindle Speed: Speed up, Slow down
 
 
Programming: E-stop, Cycle Start, Spindle on/off, Redo, Single Step, Original Point
 
 

Package Include
 
 
1 * Remote Controller
 
 
1 * Cable
 
 
 
 
 
Weee & Rohs-konformitätserklärung
 

If You Have Any Problem. Please Contact Us Through Ebay Message and We Will Gladly Assist You.

 

 

Applicable User & Skills
1. Advertising&Design Staff
2. Pcb Engineer
3. Woodwork Fans
4. Model Fans
5. User Should Better Have Electronics Background
6. Diy Ability to Repair
 
Highlights of water cooling system :
It can cool the spindle and protect the machine
Avoid the spindle burn out
Can engrave the high hardness or metal
It can improve the efficiency and accuracy of the machine.
 
We accept PayPal and bank transfer.
All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. We accept Credit Cards via PayPal.
 
2-5 working days to:UK
5-7 working days to:France ,Germany ,spain ,Italy
6-10 working days to:Other countries
 
 
 
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
 
 Please keep the original box or packaging within 15days since item received. Returned item must come with original box or packaging.
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
 
  • Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
  • Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
  • Please contact us with ebay message.
  • Please feel free to contact us if you have any questions.
    
PushAuction