electronic one ,once you purchase it,we will send to your email address at once
Notes: Please prepare a computer with USB Interface.
Attention(Parallel port):
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X pump
1X USB line
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*24mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
2.It can work with various materials(metallic & non-metallic), such as: wood,
board plywood. and soft metal .like aluminum, copper and silver to engrave
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals,
PVC foaming board, indentation plates, signs, construction models,
4.The mini CNC router Frame is movable. The machine can connect with computer
5.With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.
X,Y,Z Working Area:600(Y)*390（X）*120(Z)mm
Outside dimension:865*680*570mm（L*W*H）
Table size:770（Y）*490（X）mm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤100mm
Drive unit:
X axis:1605 Ball Screws
Y axis:1605 Ball Screws
Z axis:1204 Ball Screws
Sliding unit:
X axis:High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor.
（tips：1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V).
3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension:65*158mm
Material:304 stainless steel，Copper coil，Pressure cast aluminum pipe water jacket
VOLTS，current，power:AC220 /50Hz，5A,1.5KW VFD
Spindle speed:24000 rpm
Max working frequency:400Hz
Principal axis collet:ER11collet，Standard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions:G code / TAB files / nc file / NCC files
Communication interface:through parallel connection with computer
Software environment:windows XP / win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
If you followed the installation tips offered by us, it works like full version.）
installation tips：
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage：AC220V
Control unit：Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection：USB port OR PARALLEP port
Command code：G code
Acceptable software：
Protection：Emergency stop button
1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced
the processing abilty of the machine and can be used to
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
4, Software Compatability：Type3/ArtCAMParameter
How to USE
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a 25pin USB port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure
5.Correctly connect the machine with the controller. Don't suspended the cable which
damage the driver of the controller.
6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered
check whether the water-cooling system working well.
7.Installing a CNC control software and Drive such as the on your computer.
8.Fllowing our manual or guideline to set uo the software.
9. Before turn on the machine, please check all the cable and water- cooling system to
6.You can enjoy making you dream with using our CNC machine now.
ATTENTION : This machine comes with EU plug , please prepare an UK adapter plug cable yourself
SKU:3AIX6040USB-1+3AIX6040USB-3+3AIX6040USB-4+TS007USB
Notes:Please prepare a computer with USB Interface.
Outside dimension: 865*680*570mm（L*W*H）
Table size: 770（Y）*490（X）mm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height: ≤100mm
Drive unit:
X axis---1605 Ball Screws
Y axis---1605 Ball Screws
Z axis---1204 Ball Screws
Sliding unit:
X axis---High intensity Chromeplate shaft
Y axis---High intensity Chromeplate shaft
Z axis---High intensity Chromeplate shaft
Stepping motor: 57 two-phase 3A 150N.cm
Spindle motor:
2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor.
(tips：1. The spindle motor must connect with the VFD.
2. It cannot directly connect with the supply voltage (AC220V).
3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)
Outside dimension: 65*158mm
Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket
VOLTS, current, power: AC220 /50Hz, 5A, 1.5KW VFD
Spindle speed: 24000 rpm
Max working frequency: 60Hz
Principal axis collet: ER11collet，Standard configuration :6mm
Nut Model: ER11-A
Cooling: Water-cooling
Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface: through USB connection with computer
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Friendly reminder:
If you followed the installation tips offered by us, it works like full version.）
installation tips:
The software perform better on the 32bites system computer.
Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection: USB port
Command code: G code
Acceptable software:
Protection: Emergency stop button
MODEL THREE:CNC 3040 4 Axis PARALLEL PORT 800W
ATTENTION : This machine comes with EU plug , please prepare an UK adapter plug cable yourself
Attention:
This machine needs to connect to a computer through its controller box with a parallel cable (both included).
It is not recommended to connect to a notebook through a parallel port as the power saving features tend to interrupt the data flow.
It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parallel port driver.
These issues are detailed and fully explained on the Software website.
CNC ROUTER ENGRAVING MACHINE ENGRAVER 3040T COOL SPINDLEMOTOR VFD 800W
Description
1.This CNC 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5.With the assist of the CNC ROUTER 3040T, your design idea will be real-time display.
Friendly reminder: The engraver will come with software（Free Version
If you followed the installation tips offered by us, it works like full version.）
Installation Tips：
The software perferm better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Free Version means---Free version does not have the copyright but the function is same with the genuine version.
CNC ENGRAVING MACHINE parameters:
X,Y,Z Working Area 400(Y)*295（X）*80(Z)mm
Outside dimension 630*505*495mm（L*W*H）
Table size 550（Y）*360（X）mm
Lathe structure 6061/6063 Aluminium alloy
Max. Feeding height ≤60mm
Drive unit
X axis SFU01204-4 Ball Screws
Y axis SFU01204-4 Ball Screws
Z axis SFU01204-4 Ball Screws
Sliding unit
X axis High intensity Chromeplate shaft
Y axis High intensity Chromeplate shaft
Z axis High intensity Chromeplate shaft
Stepping motor 57 two-phase 3A 150N.cm
Spindle motor
1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC220V)
3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension 65*158mm
Material 304 stainless steel，Copper coil,Pressure cast aluminum pipe water jacket
VOLTS，current，power AC220V，5A,0.8KW VFD
Spindle speed: 24000 rpm
Max working frequency 400Hz
Principal axis collet: ER11collet，Standard configuration :6mm
Nut Model ER11-A
Cooling Water-cooling
Speed mode By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way lubricated by high grease
Repeat accuracy 0.05mm
Spindle precision radial beat acuities 0.03mm
Carving Instructions G code / TAB files / nc file / NCC files
Communication interface through parallel connection with computer
Software environment Windows XP,32Bits
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Control box parameters:
Operating Voltage AC220V
Control unit
Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection Parallel port
Command code G code
Protection Emergency stop button
Feature:
1,The NEW 0.8KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engraving more precision.Anti-blackflash,high precision,long life circle.
4, Software Compatability：Type3/ArtCAMParameter
How to use
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a 25pin parallel port output.
3. Place the control box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer
and make sure the plug will not come off.
5.Correctly connect the machine with the controller.
Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.
6.Correctly install the Spindle motor and the heat pump.
The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7.Installing a CNC control software and Drive such as the software on your computer.
8.Following our manual or guideline to set the software.
9. Before turn on the machine, please check all the cable
and water- cooling system to make sure they are working fine.
10.You can enjoy making you dream with using our CNC machine now.
1.The machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite
board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate,
PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5.With the assist of the CNC ROUTER 3040T, your design idea will be real-time display.
Cnc Engraving Machine Parameters:
X,Y,Z Working Area：400(Y)*295（X）*80(Z)mm
Outside dimension：630*505*495mm（L*W*H）
Table size：550（Y）*360（X）mm
Lathe structure：6061/6063 Aluminium alloy
Max. Feeding height≤60mm
Drive unit
X axis：SFU01204-4 Ball Screws
Y axis：SFU01204-4 Ball Screws
Z axis：SFU01204-4 Ball Screws
Sliding unit
X axis：High intensity Chromeplate shaft
Y axis：High intensity Chromeplate shaft
Z axis：High intensity Chromeplate shaft
Stepping motor：57 two-phase 3A 150N.cm
Spindle motor
（tips：1,The spindle motor must connect with the VFD.2,It cannot directly connect with the supply voltage (AC110V/220V).3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension：65*158mm
Material：304 stainless steel，Copper coil，Pressure cast aluminum pipe water jacket
VOLTS，current，power：AC 220V/50Hz，5A,0.8KW VFD
Spindle speed:24000 rpm
Max working frequency：400Hz
Principal axis collet:ER11collet，Standard configuration :6mm
Nut Model：ER11-A
Cooling：Water-cooling
Speed mode
By adjusting the VFD output voltage and operating frequency
from 0-24000RPM
Lubrication way：lubricated by high grease
Repeat accuracy：0.05mm
Spindle precision：radial beat acuities 0.03mm
Carving Instructions：G code / TAB files / nc file / NCC files
Communication interface：through USB connection with computer
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Control box parameters:
Operating Voltage:AC220V
Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection:USB port
Command code:G code
Protection:Emergency stop button
Feature:
1,The NEW 0.8KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
How to use
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a USB port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will
damage the driver of the controller.
6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to
check whether the water-cooling system working well.
7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
8.You can enjoy making you dream with using our CNC machine now.
Packing List:
1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X pump
1X USB line
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*11mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
1X Manual
One working day dispatch time and 3-6 days delivery time!
Package Content
1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X 25pin Parallel lines
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*11mm BALCK FLAT Inner six angle screw
4X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
2X Fuse (5A)
1X Power cable
1X Manual
2X CDFeatureSimple operation and installationMore steady and strong equiped with aluminum alloy frame materialsCan be controlled by computerCan control the engraving more preciseEmergency stop button enhance securityLarge 3D engraving in soft wood,MDF board,native wood,PVC,Acrylic we suggest use one or two spiral flute ball bits.Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board,solid wood,composite board plywood,stone.Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure.Cover plates reducing pollution for the screws and shafts.The reinforced and thickened machine body make transportation absolutely to be safer and longer life time.The chrome shafts is not easy to deform,suitable for long time use.High Precision Stepping motor makes engraving more precise
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X 25pin Parallel lines
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*11mm BALCK FLAT Inner six angle screw
4X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
2X Fuse (5A)
1X Power cable
1X Manual
2X CD
3040 is a desktop machine and designd for processing Industrial or Hobby Prototype Building,
Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving work at office or home.
Exquisite 3040 is a miniature version of mobile longmen structure of carving machine,put on you computer is like
1. Advertising&Design staff
2. PCB Engineer
3. Woodwork fans
4. Model fans
5. User should better have electronics background
6. DIY ability to repair
Application
This 3040 engraer is a user-friendly desktop engraving machine for those with limited space
The Computerized Engraving and Cutting Machine is suitable for various materials, such as
MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to process or
nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC
SKU:2200W-6090T1-USB+2200W-6090T2-USB+2200W-TS009USB
Package list:
1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X pump
1X USB cable
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*24mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
1X Manual
1x Tools Setting Auto-Check Instrument for CNC
CNC Router engraving machine parameters:
Model: CNC6090GZ
Outside dimension:1150x970x650mm(LxWxH)
Working platform size:1045x720mm(LxW)
How to use:
1. Assembling and locating the CNC machine on steady desk well.
2. Make sure that your computer has a USB port output.
3. Place the control box in a ventilated dry place where there is no dust,no moisture
4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise. It will damage the driver of the controller.
6. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7. Installing a CNC control software and Drive such as the MACH 3 or EMC2 on your computer.
8. Following our manual or guideline to set the software.
9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
10. You can enjoy making you dream with using our CNC machine now.
Notice: the Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system.
Frame Material: The whole machine used 6061 aluminum profiles
Max. Feeding height: ≤140mm(From base of Z axis to platform)
X, Y, Z Working Area: 600x900x150mm
Sliding unit:
X axis:SFU1605 Ball Screws;
Y axis:SFU1605 Ball Screws;
Z axis:SFU1204 Ball Screws
Drive unit:
X axis:ø20 High intensity round rail,
Y axis: SBRø20 high-strength aluminum base rails;
Z axis: ø12 high-strength round rail
Stepping motor: two-phase 3A (with hand wheels)
Driving Power for Stepping motor: AC 220V, Output DC 24V, 10A
Maximum Idle speed: 1500mm/m
Working Speed: 50-1500mm/min (different material with different speed settings)
Spindle motor: 2200W high-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur
Variable-frequency Drive(VFD): AC220V, 2200W, 0-400Hz( built-in Control box )
（tips：1. The spindle motor must connect with the VFD. 2. It cannot directly connect with the supply voltage (AC 220V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)
Drive of Stepping motor 0-3.5A adjustable four-axis drive (TB6560AHQchip, 24V power supply, 2, 4, 8, 16Subdivision settings, Factory setting: 8 subdivided)
Repositioning precision: ≤0.05mm
Speed: 0-24000r/m
Cooling method: Water cooling, Matching heat dissipation water pump
Spindle precision: Radial runout≤0.03mm
Carving command: G code/TAB file/nc/TAB /NCC/file
Protection: Emergency stop button
Recommend software: Mach3, EMC2
Communication interface: through USB PORT connect with computer
Software environment: Windows XP / win7 with 32 bite (proper computer system makes the software run, otherwise it will not)
Input Volts: AC 220V
Gross weight of machine: About 145kg/320lb
Update function: with limit switch
Application industry:
Woodworking industry: sculpture, round carving, wooden handicraft processing
Advertising signs: logo making, cutting acrylic , plastic molding, suit for making a variety of materials advertising decorative products
Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry,such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter , making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet.
About software:
Friendly reminder:The engraver will come with MACH 3 software（Free Version
If you followed the installation tips offered by us, it works like full version.）
installation tips:
The software can only work on 32 bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the CNC software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Free Version means---Free version does not have the copyright but the function is same with the genuine version.
Feature:
1. The NEW 2.2KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood.
2. water cooling spindle works more stable and durable.
3. High quality accurate ball Screws drive make the engraving more precision. Anti-blackflash, high precision, long life circle.
Attention(USB PORT)：
electronic one ,once you purchase it,we will send to your email address at once
Notes:Please prepare a computer with USB Interface.
Attention(Parallel port):
This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
More Precise Stepping Motor
The engraving process is visible as controlled by computer
Simple operation and installation
Engrave almost anything on almost any surface
X、Y、Z axis carving make more precise and and three-dimensional effect
Cover plates reducing pollution for the screws and shafts.
More steady and strong equiped with aluminum alloy frame materials
Reinforced and thickened machine body make transportation absolutely to be safer and longer life time
EXPRESS MAIL SHIPPING SERVICE with TRACKING NUMBER
Introduction
CNC3040 is suitble for Industry,Technology Research,Advertising Design,Arts Creation,Teaching,Student Project and Hobby Purposes.
CNC3040 is a desktop CNC machine and designd for processing Industrial or Hobby Prototype Building, Building Model Making,PCB,Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving work at office or home.
Exquisite 3040 is a miniature version of mobile longmen structure of carving machine,put on you computer is like puting a printer or scanner that coordination,and can completely as a compute peripherals tools,anywhere,anytime,help you to design intent fast real appear.Nonmetal materials on the milling,and it can also be used to carving simple PCB/CNC.
Application
This 3040 engraer is a user-friendly desktop engraving machine for those with limited space and /or a limited budget. The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic,MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to process or make adverstising signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc
Technical Parameters
3040T triaxial engraving machine part parameters:
3040T triaxial engraving machine part parameters:
Effective working travel ：275(X)mm*385(Y)mm*60(Z)mm
Shape dimension ：610x480*400mm
Max.workpiece dimension： 70mm
Work table dimension： 320mm*530mm
Frame materials： aluminum alloy 6063 and 6061
Leadscrew： 1404 double thread Trapezoidal screws
Driving units： X axis 1404 trapezoidal screws
Y axis 1404 trapezoidal screws
Z axis 1404 trapezoidal screws
Sliding units：X axis Dia.16mm chrome plate shafts
Y axis Dia.16mm chrome plate shafts
Z axis Dia.12mm chrome plate shafts
Stepping motor type： 57 two-phase 1.8A
Spindle motor:400w dc motor 500~8000PRM/Min
Principal axis collet: ER11 / 3.175 mm
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03 mm
Control unit:triaxial one-piece drive + ring variable power + PWM speed
Carving Instructions: G-code/.tab /.nc / .ncc/.txt
Communication interface: USB
Software environment: win 7/xp
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Machine weight:28KG
Friendly reminder:
The engraver will come with software（Free Version
If you followed the intsalation tips offered by us, it works like full version.）
intsalation tips：
The software perferm better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install
the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage:AC220V
Control unit:2.5A stepping motor driver plus adjustable spindle speed controller
Computer connection：USB port AND PARALLEL PORT
Command code:G code
Acceptable software:,
Protection:Emergency stop button
Feature
1 year machine part Free warranty
Simple operation and installation
More steady and strong equiped with aluminum alloy frame materials
Can be controlled by computer
software is simple and intellgent
Can control the engraving more precise
Emergency stop button enhance security
Large 3D engraving in soft wood,MDF board,native wood,PVC,Acrylic we suggest use one or two spiral flute ball bits.
Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board solid wood,composite board plywood,stone.
Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure
Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website.
Description:
suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper,
1. This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic,
MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal. like aluminum,
copper and silver to engrave them into 3D/2D works etc.
3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer, scanner...
5. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.
CNC Engraving Machine Parameters:
X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm
Outside dimension: 865*680*570mm（L*W*H）
Table size: 770（Y）*490（X）mm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height: ≤100mm
Drive unit:
X axis---1605 Ball Screws
Y axis---1605 Ball Screws
Z axis---1204 Ball Screws
Sliding unit:
X axis---High intensity Chromeplate shaft
Y axis---High intensity Chromeplate shaft
Z axis---High intensity Chromeplate shaft
Stepping motor: 57 two-phase 3A 150N.cm
Spindle motor:
（tips:
1. The spindle motor must connect with the VFD.
2. It cannot directly connect with the supply voltage (AC220V).
3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension: 80*188 mm
Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket
VOLTS, current, power: AC220v 50hz, 5A, 1.5KW VFD
Spindle speed: 24000 rpm
Max working frequency: 400Hz
Principal axis collet:ER11collet，Standard configuration :6mm
Nut Model: ER11-A
Cooling: Water-cooling
Speed mode: By adjusting the VFD output voltage and operating frequency
from 0-24000RPM
Lubrication way: Lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface: through parallel connection with computer
Software environment: Windows XP/win7, 32bits system
Working Speed: 50-1500mm / min (different material with different speed settings)
Friendly reminder:
If you followed the installation tips offered by us, it works like full version.）
installation tips:
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOADING AND installing the software.(This is very important)
Otherwise, the antivirus will regard the cnc software as virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage: AC220V, 50hz
Control unit: Toroidal transformer + PWM power supply module + TB6560stepping motor drive
Computer connection: Parallel port
Command code: G code
Acceptable software: EMC2
Protection: Emergency stop button
Feature:
1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood.
2. water cooling spindle works more stable and durable.
3. High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
4. Software Compatability：Emc2/Type3/ArtCAMParameter
How to Use
1. Assembling and locating the CNC machine on steady desk well.
2. Make sure that your computer has a 25pin parallel port output.
3. Place the contral box in a ventilated dry place where there is no dust, no moisture
4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller.
6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.
7. Installing a CNC control software and Drive such as the EMC2on your computer.
8. Fllowing our manual or guideline to set uo the software.
9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine.
10. You can enjoy making you dream with using our CNC machine now.
- Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
- Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
- Please contact us with ebay message.
- Please feel free to contact us if you have any questions.
