Dry Ice Blaster Clean Machine Deposit Washer Car Engine Throttle Carbon Cleaner
Air compressor requirements: ① power greater than 7.5KW, ② storage tank 300L, ③ 6bar 
If the above requirements are not met, the cleaning effect will not be ideal.
 
What is it?
AUTOOL HTS705 dry ice cleaning machine is capable of cleaning various equipment. With this cleaning technique, on the one hand, it can avoid production interruptions due to downtime, and on the other hand, disassembly and damage to the equipment can be reduced, which essentially protects the equipment and increases productivity. 
 

Why do you need it?
Highly effective cleaning equipment can greatly increase productivity The main function of the dry ice cleaning machine is capable of cleaning various equipment. With this cleaning technique, on the one hand, it can avoid production interruptions due to downtime, and on the other hand, disassembly and damage to the equipment can be reduced, which essentially protects the equipment and increases productivity.

1. Avoid injury to personnel from hazardous materials CO2 is a non-toxic substance. By cleaning with dry ice instead of toxic chemicals, we can prevent harmful substances from adhering to the equipment for a long time, which can affect the overall operation and cause harm to people.

2. Quickly removes a variety of stubborn dirty deposits. With the dry ice blast cleaning machine, the adhered dirty deposit can be thoroughly removed, and also has good protection for the equipment, so as to avoid affecting the operation and use of the equipment while being cleaned.

Why would you like choose AUTOOL HTS705?

 [Good helper for automotive technician]
It can fully clean the carbon deposits in all parts(such as throttle valve,intake valve,engine component,cylinder combustion chamber,wheel hub and ect.) of the car without disassembling the cleaning parts. This effectively reduces the cleaning time and greatly improves efficiency.
[Avoid injury to personnel from hazardous materials]
By cleaning with dry ice instead of toxic chemicals, we can prevent harmful substances from adhering to the equipment for a long time, which can affect the overall operation and cause harm to people.
[Quickly removes a variety of stubborn dirty deposits]
With the dry ice blast cleaning machine, the adhered dirty deposit can be thoroughly removed, and also has good protection for the equipment, so as to avoid affecting the operation and use of the equipment while being cleaned.
[Wide Application Range]
AUTOOL HTS705 Dry ice blast cleaners are widely used in fields such as rubber, casting, automobiles, ships, electric power, chemicals, printing, plastics, food, pharmaceuticals, and aviation.   
[Control Panel]
AUTOOL HTS705 Dry ice blast cleaner buit with Intelligent microcomputer can precisely control the pressure, which can freely adjust the pressure and speed.
 
 
[ 3-YEAR WARRANTY ]
For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
 
 
What are the parameters you might want to know?
Power supply:AC110V±10% 60Hz
Dry ice capacity: 5KG
Compressed air flow: 1~3.0m³/min
State of dry ice particles: 3mm
Air supply pressure: 0.3~1.0Mpa
Dry ice blasting amount (adjustable): 0~3.2Kg/min
Size: 350mm*450mm*575mm
Weight: 44KG
 
 
What do you need to pay attention to?

1) Before carrying out the work, it is necessary to wear protective goggles, ear muffs, work clothes and gloves.

2) Before working, set the ice feed speed to "O" and check if condensate is blasted out of the nozzle.

3) After finishing dry ice blasting, it is recommended to adjust the dry ice flow to "0". Then turn on the blasting gun for 30s to eject all the dry ice in the ice tray and the dry ice tube without leaving any residue to prevent ice blockage.

4) It must be kept clean when adding dry ice, and no other foreign objects fall into the equipment.

5) This machine uses solid CO2 particles, and ventilation must be ensured when working.

 
What can you get?
1pc* main unit
1pc* gun tube
1pc* gun handle
1pc* Shovel
2pc* Fuse
1pc* A pair of gloves
2pc*ground clip
1pc* Ground wire
1pc* Googles
1pc* Ear plugs
1pc* High pressure rubber tube
1pc* A set of fitting of blasting gun
(1 Flathead pipe, 2 bent pipe, 2 straight pipe) 
 
 

Precautions:
1 ) Before carrying out the work , it is necessary to wear protective goggles , ear muffs , work clothes and gloves.

2 ) Before working , set the ice feed speed to “0”and check if condensate is blasted out of the nozzle

3 ) After finishing dry ice blasting , it is recommended to adjust the dry ice flow to “0”.Then turn on the blasting gun for 30s to eject all the dry ice in the ice tray and the dry ice tube without leaving any residue to prevent ice blockage.

4)It must be kept clean when adding dry ice , and no other foreign objects fall into the equipment.

5)This machine uses solid CO2 particles , and ventilation must be ensured when working.

 

What are the analysis and solutions for common problems?
Common malfunctions:
● The ice funnel in the dry refrigerator does not contain ice
● The dry ice tube does not produce ice (the internal ice is blocked)
● The dry ice tube leaks ice and air
● Poor cleaning effect, incomplete cleaning of more stubborn stains such as carbon deposits

Analysis and processing methods:
● Stop the operation and open the cover to see if there is too much dry ice filling. If there is too much dry ice, take out part of the dry ice
Come out, and then work.
● Check whether the vibration pump is working, if not, contact the manufacturer for replacement.
● When the dry ice is filled in the funnel, it will instantly take away the condensate and agglomeration of the air stroke inside the funnel.
Take the steel bar in the center of the funnel and manually assist it to move up and down.
● The ice blocking of the dry ice pipe is caused by the intermittent shutdown due to intermittent use, and then immediately shut down, resulting in residual ice in the ice outlet pipe.
Leave dry ice and compressed air to cause icing, if it is indeed this working condition 1. First adjust the amount of ice output to 0, then
Turn on the spray gun switch and keep it on for 3 minutes, then adjust the ice output to 20%-30%, and then see the ice
Effect.
● Check the air source to ensure that the compressed air supplied to the dry ice cleaner is oil-free and water-free.
● The dry ice tube has been used for a long time, and the dry ice rubs against the tube wall for a long time, which causes the internal thinning. Contact the manufacturer to proceed.
replace.
● Incomplete cleaning, first check whether the air pressure and flow of the air source are insufficient, the working pressure of the studio and the dry ice machine
No less than 6bar, no less than 1.5m3/min2. The air supply pipe is too thin or too long, and the pressure drop of the pipe is too large.
Consider that the cleaning machine directly operates the main air source pipeline in the workshop for operation.  



We only accept eBay payments.
Payment should be made within 5 days after bidding ends.
 
We are not responsible for buyers' local tax and duty.
（1） Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
（2）Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
（3）Orders shipped from China will be charged with or without customs duty according to the amount of collection and payment on behalf of eBay. Uncollected orders will require the buyer to clear customs and pay the duty when the package arrives at the destination country. Customs clearance is the buyer's responsibility and obligation.For orders that do not include tax, buyers can note the tax code at the time of payment for customs clearance.

We only ship parcel to the address in eBay payment.Please make sure payment address in eBay is correct.

1.We usually send the package to you within 3 working days after receiving your payment (US,Germany,UK ship). Of course, except for special circumstances such as severe weather, please wait patiently.

2.Once the goods are shipped, a package tracking number will be formed, you can get it on eBay, and you can monitor the progress of the package at any time

3.Usually we ship the package from China via: Fedex,UPS/USPS, DHL,Aramex,SpeedPak,China Post etc.

from US via：UPS/USPS. 

from Germany via:GLS,DHL

from UK via:Hermes,Royal Mail

4.If you have special needs for transportation services, or urgently need to get the purchased items, please notify us before payment, or leave a message when paying, we will provide you with a solution as soon as possible.

1.Packages accepted to be returned for refund or replacement within 30 days of the purchase date.

2.Returned merchandise must be unused, in original packaging and include all accessories.

3.Shipping costs are non-refundable.

4.If the function of the purchased AUTOOOL product is damaged, it can be returned for repair within 3 years from the date of purchase.

1.Import duties, taxes and customs duties are not included in the item price or shipping charges.

2.Any tax fees or customs duties occurred in import country ,that should be covered by buyer. Thanks for your understanding.

3.Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.

 

1.Thank you for your attention to our products, and I wish you a beautiful day!

2. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is the best support for our shop. Positive feedback is the meaning of our work.

3.Do wish you can contact us firstly BEFORE giving us or feedback, so that we can know the problem and try our best to meet your requirements.Thank you~

4.Any question ,Pls feel free to contact us via eBay message, we will reply within 24 hours.

5. We apologize for the late reply to the question during the holidays.

6.We are a customer-centric company, and your feedback is very important to us, so please tell us what you think of our products

 

PushAuction