Osram LED lamp tube T8 SubstiTube EM Advanced 150cm 20.6W/840 G13 3100lm neutral white 4000K

Osram LED lamp tube T8 SubstiTube EM Advanced 150cm 20.6W/840 G13 3100lm neutral white 4000K

Manufacturer: Osram
EAN: 4058075611870

An LED starter is included in delivery

Product advantages
- No sagging thanks to the glass tube
- Simple, quick and safe lamp replacement without rewiring
- Energy savings of up to 64% (compared to T8 fluorescent lamps on KVG)
- Full brightness without a warm-up phase, therefore ideal in combination with sensors
- Very high switching resistance
- Also suitable for operation at low temperatures

application areas
- General lighting in ambient temperatures of -20…+50°C
- Lighting in industrial production
- Traffic zones and corridors
- Supermarkets and department stores
- Industry

Product features
- LED replacement for conventional T8 fluorescent lamps with G13 base in KVG lights or on mains voltage
- Low flicker
- Glass tube
- Mercury free
- Homogeneous illumination
- Protection class: IP20

Technical Equipment
- Suitable for operation with low-loss and conventional ballasts

Legal notice
- When replacing with a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system

safety instructions
- Not suitable for operation with electronic ballast
- Use in outdoor applications is possible in suitable damp-proof luminaires


Electrical data
Rated power 20.6 W
Rated power 20.60 W
Rated voltage 220…240 V
KVG/VVG operating mode, mains voltage
Rated current 92 mA
Current type alternating current (AC)
Operating frequency 50/60 Hz
Mains frequency 50/60 Hz
Harmonic content 16%
Network power factor λ > 0.90

Photometric data
Luminous flux 3100 lm
Luminous efficacy 150 lm/W
Luminous flux retention at the end of the nominal service life 0.70
Light color (designation) Neutral white
Color temperature 4000 K
Color rendering index Ra 83
Light color 840
Color balance standard deviation ≤5 sdcm
Rated LLMF at 6,000 h 0.80
Flicker measurement variable (Pst LM) 1
Metric for strobe effects (SVM) 0.4

Lighting data
Beam angle 190°
Warm-up time (60%) ‹ 0.50 s
Start time < 0.5 s

Mass weight
Total length 1513.00 mm
Length with base but without base pin 1500.00 mm
Diameter 26.70mm
Tube diameter 25.3 mm
Product weight 225.00 g

Temperatures & operating conditions
Ambient temperature range -20…+50 °C
Maximum temperature at measuring point tc 70 °C

lifespan
Lifespan L70/B50 at 25 °C 50,000 h
Number of switching cycles 200000
Luminous flux retention at the end of maintenance 0.70
Note lamp survival factor at 6,000 h ≥ 0.90

Additional product data
Base (standard designation) G13
Mercury content of the lamp 0.0 mg
Mercury free Yes

Possible uses
Dimmable no

Certificates & Standards
Energy consumption 21.00 kWh/1000h
Protection class IP20