Blood oxygen saturation Measurement range: 70%~99%
Pulse rate measurement range: 30BPM~240BPM
Blood oxygen saturation Measurement accuracy: ±2% within the range of 70%~99%, ≤70% undefined
Pulse rate Measurement accuracy: ±1BPM or ±1% of the measured value (whichever is greater)
SpO2 Resolution: SpO2±1%
Blood perfusion index: ≥0.2%, ±0.1%
Sleep monitoring time: 130R: none, 131R: 8 hours
Power consumption: less than 30mA
Automatic shutdown: when no finger is inserted, it will automatically shut down in 8 seconds
Operating temperature: 5℃~40℃
Storage humidity: 15%~80% when working, 10%~80% storage
Atmospheric pressure: 70Kpa~106Kpa
Battery model: 2X1.5V (2 AAA alkaline, the product does not contain batteries)
Material: ABS+PC
Product size: 62X32X33mm
Bare metal weight: 41g
Color box size: 81X68X39mm
Color box packaging weight: 68g (without battery)
1. Display parameters: blood oxygen SPO2 value, pulse PR value, blood oxygen bar graph, pulse waveform, PI (perfusion index), respiratory rate monitoring parameters (130R), sleep monitoring parameters (131R)
2. Display screen: The product adopts blue-yellow two-color OLED screen display, 5-level brightness can be adjusted.
3. Display mode: four directions, six display modes.
4. Energy saving and environmental protection: the product has low power consumption, and the two AAA batteries can be used for more than 40 hours.
5. Voltage warning: When the battery voltage is too low and may affect normal use, there is a low voltage warning prompt
6. Automatic shutdown: When no signal is generated, the product will automatically shutdown after 8 seconds.
7. Advantages: It integrates the blood oxygen probe and the processing and display module. The product is simple to use, low power consumption, small size, light weight and easy to carry.
Specification:
Blood oxygen saturation Measurement range: 70%~99%
Pulse rate measurement range: 30BPM~240BPM
Blood oxygen saturation Measurement accuracy: ±2% within the range of 70%~99%, ≤70% undefined
Pulse rate Measurement accuracy: ±1BPM or ±1% of the measured value (whichever is greater)
SpO2 Resolution: SpO2±1%
Blood perfusion index: ≥0.2%, ±0.1%
Sleep monitoring time: 130R: none, 131R: 8 hours
Power consumption: less than 30mA
Automatic shutdown: when no finger is inserted, it will automatically shut down in 8 seconds
Operating temperature: 5℃~40℃
Storage humidity: 15%~80% when working, 10%~80% storage
Atmospheric pressure: 70Kpa~106Kpa
Battery model: 2X1.5V (2 AAA alkaline, the product does not contain batteries)
Material: ABS+PC
Product size: 62X32X33mm
Bare metal weight: 41g
Color box size: 81X68X39mm
Color box packaging weight: 68g (without battery)
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
