Features:
1:Powerful components(DC voltage:12V to 72V;Maximum current:30A): Remote control water heater \ Remote control LED \ Remote control Lamp \ Remote control water pump and other remote control device;
2:Control distance: up to 50m (theoretical distance)
3:Simple wiring: only input(V+/V-) and output (V+/V-)
4:Multiple matching methods :many remotes can control same receiver at the same time(at most 20pcs remotes)
5:The remote control is equipped with a hanging buckle, which can be hung on an object at will.
Operating Mode
Setting mode 1 Momentary mode :
Press the learn button once time,
Performance :
Press and hold on one button -> the Electrical Equipment will turn ON;
Release the button -> the Electrical Equipment will turn OFF;
Setting mode 2 Toggle mode :
Press the learn button Twice time,
Performance :
Press one button -> the Electrical Equipment will turn ON;
Press the button again-> the Electrical Equipment will turn OFF;
Setting mode 3 Latched mode :
Press the learn button Three times,
Performance :
Press A button -> the Electrical Equipment will turn ON;
Press B button -> the Electrical Equipment will turn OFF;
Set Up
Note: Before configuring the signal, Press the learning button 8 times , to reset the receiver.
Setting mode 1 Momentary mode:
STEP 1
Press the learning button on the Receiver Once.
Wait for a moment , the LED will turn on , indicating you entered the learning state.
STEP 2
Press one button on the Remote Control , the LED on the receiver board will flash on;
Setting mode 2 Toggle mode:
STEP 1
Press the learning button on the Receiver Twice.
Wait for a moment , the LED will turn on , indicating you entered the learning state.
STEP 2
Press one button on the Remote Control , the LED on the receiver board will flash on;
Setting mode 3 Latched mode:
STEP 1
Press the learning button on the Receiver Three times.
Wait for a moment , the LED will turn on , indicating you entered the learning state.
STEP 2
Press A button on the Remote Control , the LED on the receiver board will flash on;
STEP 3
Press B button on the Remote Control , the LED on the receiver board will flash on;
Technical Data
Receiver Parameters:
Working Voltage: DC 12V -72V
Max current : 30Amp
Working Frequency: 433Mhz
Function option: Momentary mode/Toggle mode/ Latched mode
Modulation Mode: ASK
Matching Mode: Intelligent Learning code
Shell: Yes
Working temperature : -30~+80
Size: 66*44*31mm
Remote Control Parameters:
RF frequency : 433MHz
Support encoding : 1527 Leaning code
Transmitting range : up to 50m (theoretical distance)
Battery : 2 pcs CR2016 ( include )