Comprehensive Bowers & Wilkins CM-1 CM-3 CM-5 CM-7 & CM-9 Tweeter Repair Kit.

You are buying a Comprehensive Tweeter Repair Kit which included the following items.

2 x After Market (Generic) Replacement Tweeter Coils - Foils.

1 x Adjustable Heat Setting (60 Watt Max) Soldering Iron (Comes with Solder, Tweezers, Soldering Tips (5), Wire Cutter - Wire Stripper, Stand, Cleaning Sponge, Desoldering Pump, Carry Case & Instruction Manual)

1 x Basic Tweeter Fitting Information Leaflet.

1 x Electrical Testing Screwdriver.

1 x Philips - Pozi Screwdriver.

1 x Roll Of Insulation Tape.

1 x Tube Of Super Glue.

3 x Cotton Buds. 

Replacement Tweeter Fitting Information Below.

You are Buying 2 x After Market (Generic) Replacement Tweeter Coils - Foils to fit the Bowers & Wilkins CM-1, CM-3, CM-5, CM-7 & CM-9 Loudspeakers.

Always Fit Replacement Tweeter Coils - Foils in Pairs, that way they will look exactly the same & they will also Sound exactly the same.

These Tweeter Coils - Foils are a very good Replacement for your Old Blown or Dented Tweeters. Dependant on when exactly your Tweeters were made, these will either slot straight into place or you will find they are about 1.5mm wider that the slot for them.

If they are Slightly Wider, then all you need to do is to put a very thin edge of Superglue around the edge of your Plastic Tweeter Surround (use the tip of a Cotton Bud) & then place the Tweeter Coil - Foil in place using the Magnet part of your complete unit to line it up while the glue sets.

A Basic Tweeter Fitting Information Leaflet is Included in the Package, please take the time to Read It & to look on YouTube for Basic Instruction Videos.

BEFORE you first open the Tweeter up make sure that you Mark the Position of Both Parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & trouble later on.

You will need a Steady Hand, a Fair Degree of Common Sense (like do not glue into place until you have made sure it fits together correctly) & a Few Minutes spare time when fitting these.

REMEMBER: The Tweeter Coils - Foils are Very Delicate, Returns on Tweeter Coils - Foils that are Damaged whilst Fitting them are NOT possible.

If you are Not Sure of something please send an email through eBay Messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)

We Offer Free UK Shiping On This Item.

All items are sent by Signed for & Recorded Delivery.