Full System Diagnostic Tool + 34+ Special Functions +  Coding + Actuation Test + Expandable Module Functions + Bluetooth/Wifi connection +Free Software + Android 10 OS running on 8-inch HD IPS Touch Screen + 64GB Storage+Multi Languages Supported + Wide Vehicles Coverage + 2 Years Free Update + 5 Years Warranty + Lifetime Free Tech Support.

✔KINGBOLEN K8 Main Features: 

Enhanced Hardware Configuration：Kingbolen K8 comes with 8 inch touch pad, Android 10 system, 12600mA/h battery for long time use, 2+64G big memory storage for more vehicle software and diagnositc record.Rear 800W camera can support VIN number photo identification/Camera scan VIN.

Advanced ECU Coding(Online & Offline) for BMW, GM, Porsche, etc:K8 bluetooth scanner for car can Re-flash the Hidden Functions for personalization, Components Matching after making repairs or replacements, Reinforce Vehicle Performance, etc. NOTE: DO NOT Support ECU Reprogramming.

Guided Functions: With VAG Guided Functions, K8 can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for Audi/for Volkswagen, etc.

Programmable Module Installation(PMI): This function of k8 scanner is used to match new module data. When replacing the ECU with a new module, copy the recorded programming data of the original vehicle module into the new module to program the new module,which is used for Ford/for Lincoln/for Mazda.

Powerful Bidirectional Control/Active Test: No need to disassemble the car, K8 Bidirectional scanner can send commands to vehicle ECU for checking the integrity of systems or components‘ working status to pinpoint problematic components, such as open/close the sunroof, turn on the radiator fan and etc.

34+ Special Functions: KINGBOLEN K8 Comes with 34+ common special functions & advanced Reset, Relearn, Matching, Calibration and Adaption functions, such as: ABS Bleeding, Key Programming, Injector Coding, Oil Reset, EPB, Camshaft Position Sensor Relearn, Cam Crank Relearn, Calibration, Fuel Trim Reset, etc, makes for an excellent all-in-one diagnostic scanner for professional auto maintenance.

Key Matching/Programming: Add, Delete, Rewrite smart keys, Replace smart key ECU, Replace KNOB IGNITION, Relearn key.Note: ONLY available for Asian vehicles with early IMMO systems.NOT universally compatible. Please check compatibility with us if necessary.

Stable Wireless BT Connectivity: K8 scan too can work range up to 33 Feet (10M) for wireless diagnostics without cable limitations.

OE-Level Full System Diagnostics: Read/Clear Trouble Codes + 12-IN-1 Live Data in Graphing/Text and Data Record & Export + Retrieve Freeze Frame + Read ECU Information + Perform Active Tests for vehicle systems including Engine, Transmission, Airbag, ABS, ESP, and TPMS for more than 100 vehicle brands to quickly locate the issue and troubleshoot it.

More User-Friendly Features: AUTO VIN/ Camera Scan Vin + DTC Lookup Library+ Built-in Browser+ Remote Support + Diagnostic Feedback+Battery Voltage Monitor+Auto-generated Diagnostic Report and etc.

2 Years WIFI Software Updates: Allows you to get the most features and best user experience with one-click, maximizing return-on-investment.

*NOTE: Functions can be used are vary by vehicle model, check compatibility before purchase.

  

• Improve fuel efficiency and the durability of mechanical parts;
• Reduce power loss;Change the chimes on your car;
• Set the mirrors automatically folding and unfolding;
• deactivate the Start/Stop function, Seatbelt warning sounds, and more.

• Door Lock/Window/Horn/ Light/ Headlamp Test
• Shift Solenoid Test, Cycle the A/C
• ABS Pump Motor/Relay, Turn Fuel Pump On/Off
• Open/ Close EVAP Vent/Purge Solenoid; ACM Test, Injector buzz test, etc

Active Test:

V.A.G Guided Function

Guided Function (for VW, for Audi,for Skoda, for Seat): With guided function, KINGBOLEN K8 will be more efficient to diagnosis, as it can provide step-by-step maintenance guide to prevent vehicle failure caused by incorrect operation. Even if you are not a technician, you can operate complex functions with the help of the guided function.

FCA Security Gateway Access

AutoAuth for FCA SGW which makes K8 works for Chrysler, for Dodge,for Jeep, for Alfa Romeo and for Fiat after 2017. Register with AutoAuth to enable KINGBOLEN K8 tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and Bi-Directionals without using a bypass cable. (*Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.)

Built-in Web Browser & DTC Look UP

K8 obd scanner has a built-in web browser（Chrome）, so you can quickly find information and view YouTube auto repair videos without using other devices, which is very convenient and considerate. DTC Library can help you find the meaning of the fault code quickly.

TPMS function:

with wireless TPMS tool (optional), TPMS activation, programming and learning functions can be supported. （note: you can buy those model on Store）

1.TPMS Diagnostic function KINGBOLEN K8 can work with wireless tire pressure diagnostic tool (optional accessory) toachieve the features of TPMS activation, programming and learning.

a)Activation:to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status.

b)Programming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication.

c) Learning:to write the sensor ID into the vehicle for sensor identification.

 

34+ Service Reset Special Functions:

K8 can program and code the electronic control system of prevailing vehicle models, also perform special functions, including:

1 -Oil Reset The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle.

2 -Elec.Throttle Adaption Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.

 

3 -Steering Angle Reset To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle.

 

4 -Battery Matching This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.

 

5 -ABS Bleeding When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

 

6 -Break-pad Reset lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.

 

7 -DPF Regeneration DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reducePM ignition combustion) to stabilize the filter performance.

 

8 -Gear Learning The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine , crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.

 

9 -IMMO Service To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel,,BCM, or remote control battery is replaced, anti-theft key matching must be performed.

 

10- Injector Coding Write injector actual code or rewrite code in the to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.

 

11- TPMS Reset After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.

 

12- Suspension Matching This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.

 

13- AFS Reset This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture.

 

14- A/T Learning This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.

 

15- Sunroof Initialization This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.

 

16- EGR Adaption This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.

 

17 -ODO Reset a) ODo reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.

 

18- Airbag Reset This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicatorlights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and theairbag computer can continue to use.

 

19- Transport Mode ln order to reduce power consumption, the following functions may be disabled,including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal.

 

20- A/F Reset This function is applied to set or learn Air/Fuel ratio parameters.

 

21- Stop/Start Reset This function is used to open or close the automatic start-stop function via setting the hidden function in(provided that the vehicle has a hidden function and supported by hardware).

 

22- NOx Sensor Reset NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine .

 

23- AdBlue Reset (Diesel Engine Exhaust Gas Filter) After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required.

 

24- Seat Calibration This function is applied to match the seats with memory function that are replaced and repaired.

 

25- Coolant Bleeding Use this function to activate the electronic water pump before venting the cooling system.

 

26- Tyre Reset This function is used to set the size parameters of the modified or replaced tire.

 

27- Windows Calibration This feature is designed to perform door window matching to recover initial memory, and recover theautomatic ascending and descending function of power window.

 

28- Language Change This function is used to change the system language of the vehicle central control panel.

......

 

 

Additional Features of K8: 

Android 10.0 System Diagnosis: make you smooth operation, this diagnostic tool will be capable of speedier, more accurate diagnoses.

 

10 hours of mixed-use battery life: Compatible With up to 10 hours of mixed-use battery,gives you a flexible operation experience.

 

Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

 

Maintenance Report: Create vehicle files for all repaired vehicles, integrate all repair data including diagnostic reports, real-time data stream reports and other diagnostic data into one, so that the technician can know the condition of the car.

 

Two-year free update: Support online smart one-click upgrade of car software. After two year, if you don't plan to update, the scanner can continue to diagnose

 

 

Support more than 150 Car Brands

Covering more than 150 car series and ten thousands of car models.

·Aisa: Compatible with Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi,Gonow, Qoros, Maxus, Mvm

·Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR

·USA: Compatible with Gm, USAFord, Chrysler, Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM

   

How To Register KINGBOLEN K8 :

Step1 :Setting language & Time Zone , Connect WIFI

Step2 :Agree the Register term

Step3 :Register an account with your Email box

Step4 :VCI Activate - Enter the serial number and Password to activate

How To Update KINGBOLEN K8 :

KINGBOLEN K8 is with 2 years free Update Click "Update" to One-Click Update

How To Printer the Diagnostic Report :

Two Ways Print :

1. Share the Diagnostic Report out via USB , then print .

2. Use Think Printer to print directly ( need buy Think Printer additional )

 

High-end hardware configuration of KINGBOLEN K8 :

Operating System: Android 10

Camera:Rear camera 8.0MP

Memory:2G

Storage:64G

Network:Wi-Fi, WL AN 802. 11b/g/n

Bluetooth: Bluetooth 5.0

Battery: 3.7V/12600mAh

Screen: 8 inches

Working Temperature: 0°C ~ 50°C S

Temperature:-20°C ~ 60°C

Package List :