• Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. If you are not sure if this model is right for you, please feel free to contact us.
  •  
  • Specification:

    • ALL-CARB VFD 1 to 3 Phase Variable Frequency Drive 1.5kW 2HP 220V Input AC 7A

    Caution:
    Minor differences in product design may result in different model numbers.
    Please check the picture carefully to see if it matches your product.
    If you are not sure if this model is right for you, please feel free to contact us.

     

    Specification:

    Power Source: ac
    Input Voltage: 220 Volts
    Applicable motor horse-power: ≤1.5kw (2hp)
    Input valtage: 220VAC(+/-5%) 1 or 3 phase（"R", "T" terminals for 1 phase, "R", "S". "T" terminals for 3 phase)
    Output valtage: 3 phase 220v
    Input Frequency: 47-63Hz
    Output frequency: 0-400Hz, 0-50Hz/60Hz
    Rated current: 6.8A (Represents the maximum current the VFD can withstand,this is a fixed value)

     

    Description:

    Connection way: Input: 220VAC(+/-5%) 1 or 3phase(for single-phase input, just connect the input wire to the R and S terminals). Output: 3phase 220v. Frequency: 0-50hz/60hz. 0-400hz.
    Multiplex terminal: Unlike other inexpensive VFDS, this VFD has two sets of terminal functions, Rich of digital and analogy control terminals for versitile control, optional MODBUS (RS485) extension, diversified parameter setting.
    Safety performance: Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
    Good Noise Control: The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
    Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. VFD output terminal can only be connected to the motor, it cannot be directly connected to the switch
    IMPORTANT NOTE: This product does not support the installation of brake resistance (this function needs to be customized). If your motor is heavy load, pls choose a higher horsepower vfd than your motor's. To protect the VFD, be sure to press the red button "Stop" and turn off the power when you stop using it.

     

    Features:

    Function introduction: DC cooling fan: DC cooling fan low noise, large air volume help vfd heat dissipation, improve product stability

    Basic parameter for 400hz spindle: For 400hz motor - Set   pd005=400, pd004=400,pd003=400, pd072=400, pd144=3000, Then you can start driving the 400hz spindle. (Note: The VFD is already set to 400Hz by default when it is received)

    Basic parameter for 3 phase 50/60Hz motor: Drive 50/60hz motor - Set   pd005=50/60, pd004=50/60, pd003=50/60, pd072=50/60

    Key Function: UP - Progressively increase data or function codes. DOWN - Progressively decrease data or function codes. SET - Enter menus step-by-step, save setting parameters. PRGM - Exit current(or present) state, switch among each states, mainly used to switch monitoring state, exit to previous menu. FWD/REV - 1, Press momentary button to start,release to stop; 2 Switch the rotation direction. SHIFT - Switch monitoring parameters at monitoring state, at secondary menu, move data box to process editing position. Kindly Note - If you want to show RPM in the display,please press 'SHIFT' key.

    Diverse terminals, more functions for you to choose: Supports external potentiometer control (connect the "FOR" and "DCM" terminals,than set PD001=1). Supports mcah3 function and RS-485 communication.

    Advanced motherboard features: PID control - advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. Easy PLC function can realize 16 legs of speed and inverter control function. RS485 communication port, adopting standard international MODBUS main circuit control. With extremely strong anti-jamming capability. Low output ratting torque0.5HZ-150%, low speed running ability. Carrier adjustable by 16KHZ, completely soundless working environment. Broad voltage working area, normal running in 304V-456V. Auto voltage regulation (AVR) technique, for ensuring the inverter load capability. With perfect error protection and short circuit starting protection capability.

     

    This product offers the best after-sales service.
    We are committed to providing you with durable and high quality products.
    Thank you for choosing our products!

     

    Includes:

    1 × Variable Frequency Drive

     

     


    Item Specifics
    Brand ALL-CARB
    MPN MOT2700562
    Power Source ac
    Applicable motor horse-power ≤1.5kw (2hp)
    Input Voltage 220 Volts
    Input valtage 220VAC(
    Output valtage 3 phase 220v
    Input Frequency 47-63Hz
    Output frequency 0-400Hz, 0-50Hz/60Hz
    Rated current 6.8A

    Payment
    We accept Paypal,Google Pay,VISA,Master Card,American Express.Discovere,eBay Mastercard payment.
    Shipping
    Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
    Usually your Items will be shipped within 1-3 business day after your payment is cleared.
    International orders may take 10 to 30 business days to arrive.
    We have CA, NJ  warehouses and ship items may vary according to the stock.
    Returns
    Please contact us first when return, exchange and refund is required.
    Any direct return of purchased items will not be processed.
    Change-of-mind return can only be accepted within 7 days after purchase.
    All other returns can be accepted in 30 days.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    Contact Us
    And our office is closed on Sunday and we apologize for the late reply during the holidays.
    Before leaving us neutral or negative feedback, please contact us first.
    We will do everything we can to give you a satisfying solution.
    Please don't open case via eBay or PayPal.
    We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
    So please talk with us and we will not let you down.
    Feedback

    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    ALL-CARB VFD 1 to 3 Phase Variable Frequency Drive 1.5kW 2HP 220V Input AC 7A

    Caution:
    Minor differences in product design may result in different model numbers.
    Please check the picture carefully to see if it matches your product.
    If you are not sure if this model is right for you, please feel free to contact us.

     

    Specification:

    Power Source: ac
    Input Voltage: 220 Volts
    Applicable motor horse-power: ≤1.5kw (2hp)
    Input valtage: 220VAC(+/-5%) 1 or 3 phase（"R", "T" terminals for 1 phase, "R", "S". "T" terminals for 3 phase)
    Output valtage: 3 phase 220v
    Input Frequency: 47-63Hz
    Output frequency: 0-400Hz, 0-50Hz/60Hz
    Rated current: 6.8A (Represents the maximum current the VFD can withstand,this is a fixed value)

     

    Description:

    Connection way: Input: 220VAC(+/-5%) 1 or 3phase(for single-phase input, just connect the input wire to the R and S terminals). Output: 3phase 220v. Frequency: 0-50hz/60hz. 0-400hz.
    Multiplex terminal: Unlike other inexpensive VFDS, this VFD has two sets of terminal functions, Rich of digital and analogy control terminals for versitile control, optional MODBUS (RS485) extension, diversified parameter setting.
    Safety performance: Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.
    Good Noise Control: The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
    Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. VFD output terminal can only be connected to the motor, it cannot be directly connected to the switch
    IMPORTANT NOTE: This product does not support the installation of brake resistance (this function needs to be customized). If your motor is heavy load, pls choose a higher horsepower vfd than your motor's. To protect the VFD, be sure to press the red button "Stop" and turn off the power when you stop using it.

     

    Features:

    Function introduction: DC cooling fan: DC cooling fan low noise, large air volume help vfd heat dissipation, improve product stability

    Basic parameter for 400hz spindle: For 400hz motor - Set   pd005=400, pd004=400,pd003=400, pd072=400, pd144=3000, Then you can start driving the 400hz spindle. (Note: The VFD is already set to 400Hz by default when it is received)

    Basic parameter for 3 phase 50/60Hz motor: Drive 50/60hz motor - Set   pd005=50/60, pd004=50/60, pd003=50/60, pd072=50/60

    Key Function: UP - Progressively increase data or function codes. DOWN - Progressively decrease data or function codes. SET - Enter menus step-by-step, save setting parameters. PRGM - Exit current(or present) state, switch among each states, mainly used to switch monitoring state, exit to previous menu. FWD/REV - 1, Press momentary button to start,release to stop; 2 Switch the rotation direction. SHIFT - Switch monitoring parameters at monitoring state, at secondary menu, move data box to process editing position. Kindly Note - If you want to show RPM in the display,please press 'SHIFT' key.

    Diverse terminals, more functions for you to choose: Supports external potentiometer control (connect the "FOR" and "DCM" terminals,than set PD001=1). Supports mcah3 function and RS-485 communication.

    Advanced motherboard features: PID control - advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability. Easy PLC function can realize 16 legs of speed and inverter control function. RS485 communication port, adopting standard international MODBUS main circuit control. With extremely strong anti-jamming capability. Low output ratting torque0.5HZ-150%, low speed running ability. Carrier adjustable by 16KHZ, completely soundless working environment. Broad voltage working area, normal running in 304V-456V. Auto voltage regulation (AVR) technique, for ensuring the inverter load capability. With perfect error protection and short circuit starting protection capability.

     

    This product offers the best after-sales service.
    We are committed to providing you with durable and high quality products.
    Thank you for choosing our products!

     

    Includes:

    1 × Variable Frequency Drive

     

     

    Item Specifics
    Brand :ALL-CARB
    MPN :MOT2700562
    Power Source :ac
    Applicable motor horse-power :≤1.5kw (2hp)
    Input Voltage :220 Volts
    Input valtage :220VAC(
    Output valtage :3 phase 220v
    Input Frequency :47-63Hz
    Output frequency :0-400Hz, 0-50Hz/60Hz
    Rated current :6.8A


    We accept Paypal,Google Pay,VISA,Master Card,American Express.Discovere,eBay Mastercard payment.
    Notice: The Guaranteed Date is automatically generated and displayed by ebay. We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.
    Usually your Items will be shipped within 1-3 business day after your payment is cleared.
    International orders may take 10 to 30 business days to arrive.
    We have CA, NJ  warehouses and ship items may vary according to the stock.
    Please contact us first when return, exchange and refund is required.
    Any direct return of purchased items will not be processed.
    Change-of-mind return can only be accepted within 7 days after purchase.
    All other returns can be accepted in 30 days.
    We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
    And our office is closed on Sunday and we apologize for the late reply during the holidays.
    Before leaving us neutral or negative feedback, please contact us first.
    We will do everything we can to give you a satisfying solution.
    Please don't open case via eBay or PayPal.
    We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
    So please talk with us and we will not let you down.

    We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.