(The item pictured is a junction box. The control electronics box has a circuit board with capacitors and the technology for controlling individual groups. The control electronics box also has ten connection contacts for + and - contacts for connecting each nano point light.)
Junction boxes are poured with the casting compound. This means that the contacts with the connection cables in the box are protected against moisture. The content of one bag is 143 ml. The bag contains hardener and casting resin. If you remove the stick in the middle of the bag, you can knead the bag and mix the resin and hardener. A two component casting resin. The casting resin remains flexible after curing.
2 - component - PUR - Kruemel - casting resin type KG 143. The casting resin KG 143 is a 2-component polyurethane casting resin (PUR) specially developed for casting cable connections. The transparent, removable - crumb - casting resin allows visual inspection even after casting. The connection point can be made accessible again at any time by removing the casting resin.
Typical areas of application: Cable junction boxes, junction boxes, telecommunications cable connections, electronic components, etc. Properties: In a practical two-chamber mixing bag, good flow properties, excellent hydrolysis resistance, halogen-free, remains transparent after curing, no cracking under electrical load, excellent adhesion to Allen cable materials, low curing temperature.
When using PUR casting resin, it is recommended to wear protective gloves, safety glasses and respiratory protection. The PUR casting resin is toxic. If it comes into contact with skin, the area should be cleaned with water. In case of contact with eyes, a doctor must be sought. Use in a ventilated room.